Requires zinc oxide and stearic acid as activators in many kinds of rubber batch.Easily disperses in rubber;yields non-staining and non-discoloring products.Mainly used in the manufacture of latex products,foam rubber,latex coating gloves. It is light yellow powder with a little bitter,no poison,The density is 1.70.the decomposable temperature is 300.0 Item MZ-5 MZ-15 Appearanceoiled powder , light-yellow powderoiled powder, light-yellow powder Initial M.P ºC =200.0200.0 Loss on Drying %,=0.300.30 Zinc Content %16.0-22.015.0-18.0 M% =5.015.0 Residues% =0.10.1 Additive%
The product is used as antioxidant for natural rubber and latex;also used for polyethylene.It can be used alone,or together with other anti-aging agent(such as DNP, AP and other nonpolluting anti-agers).It should not be used for food contact rubber products. The product is white powder,no smell but taste bitter,the initial is more than 290.0?,loss on drying is 0.30,ash is less than 0.4%.
It is used for natural and many synthetic rubbers.Mainly used in the manufacture of tires,hose,footwear,tape and genera industrial products. It is gray-white powder,and have three grades,qualified grade ,first grade and top grade. Its packing is 25kg plastic woven bag,paper with plastic film bag. The product could be oiled and pelleted upon customer request.
Appearanceyellow powderyellow powderyellow powder InitialºC=173.0171.0170.0 Loss on drying %=0.300.400.50 Ash%=0.300.300.30 Residues=0.100.100.10 It is yellow powder. Slightly foul odor and bitter taste,nonpoisonous. Specific gravity :1.42-1.52.Soluble in ethyl acetone,acetone,dilute solution of sodium hydroxide and sodium carbonate,ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. It is used in the manufacture of tires, tubes, footwear, rubber belts and hoses. Its packing is paper with plastic film bag,25kg plastic woven bag The product should be stored in the dry and cooling place with good ventilation,avoiding exposure of the packaged productto direct sunlight.
1.Application of Medical Grade liquid silicone rubber for shoe insoles The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole. This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care. 25kg/drum, 200kg/drum
1. Applications of liquid pad printing silicone rubber Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface. 2. Features of liqiud pad printing silicone rubber a. resistance to deformation, high-temperature b. high printing times c. good aging resistance d. exceptional elasticity e. great printing effect 3. Operation Instructions of liquid pad printing silicone rubber Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber. 25kg/drum, 200kg/drum
1. Application of rtv liquid moulding silicone rubber : liquid molding casting silicone rubber is mainly applied for making various molds,such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum casting and moulding, soaps, candle & lighting, architecture, decorative arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc.. 2.Features of rtv liquid moulding silicone rubber: ,a. low viscosity, exceptional fluidity and easy operation : 21000 cps suitable for pouring b. resistance to deformation, high-temperature 220 degree centigrade c. acid, alkali and ageing-resistance d. low shrinkage< 0.2% e. good tensile strength 36¡À2 (kgf/cm) f. high reproduction times 3. rtv liquid moulding silicone rubber data sheet: 25kg/drum, 200kg/drum
Steel drum, net weight 170kg/drum or iso tank. Storage at ventilate and dry place and prevention from water, heat and fire; it should be kept away from oxidant, acid and alkali. Handling according to hazardous substances and prevention from exposing to sunlight and rain. Be careful when loading and unloading to avoid damages of the package. Steel drum, net weight 170kg/drum or iso tank.
Steel drum, net weight 200kg/drum or iso tank. Storage at ventilate and dry place and prevention from water, heat and fire; it should be kept away from oxidant, acid and alkali. Handling according to hazardous substances and prevention from exposing to sunlight and rain. Be careful when loading and unloading to avoid damages of the package. Steel drum, net weight 200kg/drum or iso tank.
Steel drum, net weight 200kg/drum or 230kg/drum or iso tank. Storage at ventilate and dry place and prevention from water, heat and fire; it should be kept away from oxidant, acid and alkali. Handling according to hazardous substances and prevention from exposing to sunlight and rain. Be careful when loading and unloading to avoid damages of the package. Steel drum, net weight 200kg/drum or 230kg/drum or iso tank. Storage at ventilate and dry place and prevention from water, heat and fire; it should be kept away from oxidant, acid and alkali. Handling according to hazardous substances and prevention from exposing to sunlight and rain. Be careful when loading and unloading to avoid damages of the package.
Steel drum, net weight 200kg/drum. Storage at ventilate and dry place and prevention from water, heat and fire; it should be kept away from oxidant, acid and alkali. Handling according to hazardous substances and prevention from exposing to sunlight and rain. Be careful when loading and unloading to avoid damages of the package. Steel drum, net weight 200kg/drum.
White crystalline lens¡¨º¬the odor likes grass. Caution! may cause eye and skin irritation. May cause respiratory and digestive tract irritation. May cause central nervous system depression. Moisture sensitive. It is used for production of general silicone polymers and specific organic silicon compounds, such as surface treatment agent, coupling agent, crosslinking agent and so on. Steel drum, net weight 125kg/drum. The package should seal up completely, keep in cold, dry and ventilating place. Be careful when loading and unloading to avoid damages of the package. During transporting, protect against damp, water, acid and alkali.
Product name: predispersed rubber vulcanizing agent s - 80 Producing area: liaoning panjin Chemical name: sulfur bber products which need to inherit the dynamic stress, various kinds of soft rubber, not sulfur defective light color rubber. Packaging and shipping: 25 kg, polyethylene bag lined with carton. Should be stored in a cool, ventilated and away from the fire place.
The tensile strength of the vulcanizates can be improved if it contain zno-80, elongation at failure is also improved. Compared with the extruding rubber powder of zinc oxide, predispersed rubber activator zno ¡§c 80 rubber extrusion profile surface more smooth .Mother micelle non-stick regiment at room temperature, make the ingredients convenient and accurate; liquidity is good; no dust float in the sky, will not result in a material loss, use zno - 80 can eliminate the dust pollution and improve the accuracy and convenience of measuring, effectively reduce the refining power consumption, energy saving effect is obvious. Also avoid thermal expansion phenomenon when using powdered zinc oxide cr rubber and help to improve tyre lining tightness. Application scope: used in almost all rubber products, improve the static and dynamic mechanical properties. Packaging and shipping: 25 kg, polyethylene bag lined with Carton.Should be stored in dry, cool, ventilated place, avoid direct Sunlight and moisture.
Product name: pre dispersion mother rubber antiscorching agent ctp-80 Producing area: liaoning panjin Molecular: c11h15o2sn Molecular weight: 263.1 Cas no. : 17796-82-6 Appearance: grey white granular Our company product advantages:our company's ctp-80productis non-toxic and pollution-free, hasnodust, withdispersion characteristics.Suitable for automaticweighing, ensureaccurate weighing. Packaging and shipping: 25kg/ bag, pebag linedcarton, should bestored in a cool, ventilated, dry place.Intactstorage, room temperature25 ¡æstorage period of12 months.
Product name: pre dispersed rubber vulcanization accelerator cbs - 80 (cz - 80) Producing area: liaoning panjin Chemical name: n - cyclohexy - 2 -benzothiazole sulfenamide Product application: it is an after-effect accelerator. It has high performance of scorching resistance and short curing time. It mainly used for tire, rubber tubes, shoes, tapes, tapes and cables. Packaging and shipping: 25 kg, polyethylene bag lined with carton. It should be stored in a dry, cool, ventilated place
Works:owing to glass wool's good performance, e.G., thin and long inner fiber, low thermal conductivity, it can stop air flowing and heat transforming. Meanwhile, it can quickly reduce the transportation of sound to make effects of insulation and sound absorption. Type:centrifugal glass wool is divided into glass wool boards and glass wool blanket. Applications: It was the best material used for the insulation and sound absorption of steel structures. It mainly includes bare blanket with foil-clad covered. They are widely used in industrial plants, warehouse, public facilities, exhibition centre& ¤s, shopping centers, cold shores and a variety of indoor playgrounds, sports grounds and other buildings. Packing details:plastic bag, woven bag, pp/pe bag or as your specifical requirements
Strenghts for platinum cure molding rubber silicone rtv Operation of platinum cure molding rubber silicone rtv Rtv625 is suitable for making moulds for small size products by pouring method; Rtv630 is suitable for making moulds for small or medium size products by pouring and brushing method; 25kg/drum or 200kg/drum
Liquid molding silicone rubber/(rtv) silicone rubber application Liquid molding silicone rubber is suitable for industries such as toys, gifts, furniture decoration, construction decoration, stationery, resin crafts, unsaturated resin crafts, poly resin crafts, candle crafts, plastic crafts, plastercrafts, artificial plant and animal crafts, buddhist statue crafts. Liquid molding silicone rubber/ (rtv) silicone rubber features A) good characteristics of easy-operation B) good flowability and light viscosity C) low shrinkage D) no deformation E) favorable tension F) favorable hardness G) high temperature resistance, acid and alkali-resistance and aging resistance Liquid molding silicone rubber/ (rtv) silicone rubber description Tin-based silicones, also called condensation-cure silicones, are two-component materials which cure at room 25kg/drum or 200kg/drum
25 Dielectric permittivity(1.2mhz) 3.0~3.3 Volume resistivity(cm) 1.01016 Fire resistance 94-v1 (pls note all data of pcb electronic potting silicone rubber with black color above is in 25c with 55% humidity conditions. We don't guarantee a same date if testing under different conditions, or when data was regenerated). Warm tips for for pcb electronic potting silicone 1. Sealing package for storage. The mixture should be used up at once to avoid wasting. 2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes. 3. When it gets stratified after a period of storage, please mix hy-210# evenly before using, It does not affect the performance. Shelf life and transportation 1. Twelve(12) months when stored at 25c in original unopened packages. 2. This is a non-dangerous product, it can be transported as general chemicals. 3. Products exceed the storage life should be confirmed normal before using. Technical guidelines 1. Pls put part a and b in separate container and stir evenly before mixing the two Parts together. 2. Mixing ratio part a:part b is 10:1 3. Bubble release if necessary, deaeration the mixture under 0.08 mpa for 3 minutes. 4. Hy-215# is cured at room temperature, so pls put it under room temperature after Pouring. It comes to next process when basically cured, and it takes about 24 hours For completely cured. 25kg/drum or 200kg/drum
