Wafer and lug butterfly valves Manu.Std.:api609 Test and inspection:api598 End connection:wafer Side flanged std:asme b16.1 125/150psi Structure length:api609 Body:ci, di, carbon steel, stainless steel Disc:ci, ai-bronze, stainless steel, carbon steel Seat:epdm nbr ptfe Control actuator:handles, gear, electric and pneumatic Temperature range:-45-120 degrees. Vneer
Outside screw stem (OS & Y) and No rising stem type Metal seat gate valves DN40-600 2¡±-24¡± Working pressure: PN16 Class125 Body and bonnet: cast iron Design standard: ANSI DIN JIS Face to face: DIN F4 F5, ANSI B16.1 Flange connection: ANSI B16.10 DIN EN1092 Wedge cast iron Seat: brass,stainless steel Drive mode: hand wheel, gear and electric actuated
We can manufacture the Shaffer type Annular Bop. The size detail are as below: 7-1/16" 3000psi/5000psi 11" 3000psi/5000psi/10000psi/15000psi 13-5/8" 3000psi /5000psi/10000psi/15000psi Features Strong simple construction and space saving design with only five major components. Simple hydraulic system with only two hydraulic connections required. Wear ring on moving parts to prolong the life of the preventers . Easy servicing on field. Low operating pressure. Rugged reliable sealing elements. Steel segments reinforce sealing element. Long stripping life.
Available Our Ram Bop are Cameron U type Ram Bop. Application Surface and subsea Bore Sizes and Working Pressure 7-1/16 3,000 « 15,000 psi 11 3,000 « 20,000 psi 13-5/8 3,000 « 15,000 psi 16-3/4 3,000 « 10,000 psi 18-3/4 10,000 psi 20-3/4 3,000 psi 21-1/4 2,000 «10,000 psi 26-3/4 3,000 psi Body Styles single, Double, Triple ConnectionsFlanged, Studded, Hub Features Major components are forged for uniform strength and impact resistance. Ram packing is generous and self-feeding. It cannot be dislodged by fluid flow. Bonnets are opened and closed by hydraulic pressure. All working parts and control fluid passages are enclosed. Ram change is quick and easy. Well bore pressure aids in holding rams closed. The three seals and vent port hole prevent well pressure from bleeding into operating cylinder. Rams can be locked in closed position by optional hydraulic ram lock. All operating parts as well as rams and seals can be replaced on site.
1.Connector: plastic g3/8 Brass g3/8 2.Height: 240mm 3.Plug adaptor: refill or non-refill function for option refill rate 0-30% 4.Water pressure rang:0.2 16kgf/cm2 5.Compacted parts prevent it be damaged by transporting. 6.Backflow be prevented. 7.Suitable for concealed cistern. 8.Filter prevent impurity go into fill valve and easy to clean. 1pc/pe bag.
1.Connector: plastic g3/8¡ Brass g3/8 2.Height:adjustable 7.5 3.Plug adaptor: refill or non-refill function for option refill rate 0-30% 4.Water pressure rang:0.2 a20kgf/cm2 5.All corner designed as fillets makes it with better hand feeling. 6.Compacted parts prevent it be damaged by transporting. 7.The red clips are attached to fill valve body makes it easier to adjust float cup and height of body. Customer will never worry about clip may loss again. 8.Filter prevent impurity go into fill valve and easy to clean. 1pc/pe bag and carton
1.Connector: 59mm(2 ) for 1pc toilet 59mm(2 for 2pcs toilet 2.Fixed and adjustable overflow pipe for option, Fixed overflow pipe height: as request Adjustable overflow pipe height: 220mm-380mm 3.Flush valve height:185mm, 250mm, 290mm.It is suitable for toilet tank height of 220mm-450mm, 285mm-515mm, 325mm-555mm 4. Adjustable partial and full flush can save more water as request 5.Various top push button for selection 6.Metal lock for one piece toilet. 1pc /pe bag.
1.Connector:48.4mm(1.5 ), 59mm(2 ), 65mm for 1pc toilet 48.4mm(1.5 ), 59mm(2 ), 65mm for 2pcs toilet 2.Fixed and adjustable overflow pipe for option, Fixed overflow pipe height: as request Adjustable overflow pipe height: 220mm-380mm 3.Flush valve height:180mm.It is suitable for toilet tank height of 240mm-450mm 4. Adjustable partial and full flush can save more water as request 5.Side push and top push both workable 6.Metal lock for one piece toilet 7. 38 push button option to with16 adaptor. 1pc/pe bag.
Magnetic check valve was designed with magnet diaphragm, and sealed by the metal. it was used on the exhaust pipe of the compressor, for inside, it uses guide device and automatic suchtion design thant prevent reverse refrigerant flow in liquid lines and compressor discharge lines.
TX Plunger solenoid valves are direct or servo operated solenoid valves for liquid, suction, and hot gas lines with fluorinated refrigerants.
TX Plunger solenoid valves are direct or servo operated solenoid valves for liquid, suction, and hot gas lines with fluorinated refrigerants.
Suitable for package AC, indoor-unit of ceiling-type AC. The pump is used to drain out the condesed water from the evaporator formed during refrigerating cycle and drying. The pump is of high efficiency, low vibration, light, small size and ole power consumption
Plunger ball valve.
PK diaphragm solenoid valve is an automatic control parts used in refrigeration system to control the refrigerant to pass or not pass, the valve is widely used in compressor group, central air-conditioning, cold storage equipment and bus air-conditioning system
Art no:jk101-0301 Brass mixer tap Brass body, zinc handle, 2pcs ss hose, 4 screw accessories. Packingg: 1pc/box Volumn/box: 25x15x6cm Pcs/ctn: 10pcs.
1ú¬material:304ú¼316ú¼303ú¼1018 ú¼brass and according to client's requirement 2ú¬packing:wooden cases or as client's requirement 3ú¬services:oem service offered Buyer label offered Designed service Iso9001ú¦2000 quality control and inspectin Adance producing and testing technology and designing We can slso complete processing with drawing or samples provided to us by our customer
1.Size:1/2''-4''(standard:jis, bs, ansi, din) 2.Long service life 3.Color:grey/china-white/white 4.Oven test:no sign of bubble or cracks 5.Simple installation 6.Temperature resistance: water temperature from -5deg to 45deg 7.Application:structure engineering, water supply system, agriculture irrigation 8.Delivery:about 45days 9.Payment: by T/T. Package:by pe plastic bag in carton.
1.Size:1/2''-4''(standard:jis, bs, ansi, din) 2.Long service life 3.Color:grey/china-white/white 4.Oven test:no sign of bubble or cracks 5.Simple installation 6.Temperature resistance: water temperature from -5deg to 45deg 7.Application:structure engineering, water supply system, agriculture irrigation 8.Delivery:about 45days 9.Payment: by T/T 10.Package:by PE plastic bag in carton. Package:by PE plastic bag in carton.
1.Size:1/2''-4'' (standard:JIS, BS, ANSI, DIN) 2.Long service life 3.Color:grey/china-white/white 4.Oven test:no sign of bubble or cracks 5.Simple installation 6.Temperature resistance: water temperature from -5deg to 45deg 7.Application:structure engineering, water supply system, agriculture irrigation 8.Delivery:about 45days 9.Payment: by T/T 10.Package:by PE plastic bag in carton. Package:by PE plastic bag in carton.
Feature: Can be placed in top of pipeline,heat exchangers for steam exhaust valve. Small size,light weight,large displacement,anti-gelatinized. Not be used for superheated steam.
