Fuzhou Siaon Optoelectronic Technology Co., Ltd.provides BK7 Windows BK7 window is the most common type of window, it has good performance over visible and near infrared wavelength region. The refractive index is 1.5168 at 587.6nm.
Fuzhou Siaon Optoelectronic Technology Co., Ltd.provides Glan Taylor Polarizers Glan Taylor Polarizer is made of two same birefringent material prisms that are assembled with an air space. It has a length to aperture ratio less than 1.0 makes it a relatively thin polarizer. The polarizer with no side escape windows are suitable for low to medium power application where the side rejected beams are not required. The angular field of different materials of polarizers is listed below for comparison.
Fuzhou Siaon Optoelectronic Technology Co., Ltd.provides Glan Laser Polarizers Glan Laser Polarizer is made of two same birefringence material prisms that are assembled with an air space. The polarizer with two escape windows allows the rejected beam to escape out of the polarizer which makes it suitable for high power laser.
Fuzhou Siaon Optoelectronic Technology Co., Ltd.provides Glan Thompson Polarizers Glan Thompson Polarizer is made of two calcite prisms or two a-BBO prisms cemented together. Two types of Glan Thompsons are available. Glan Thompson polarizers tend to have higher extinction ratio than air spaced polarizers. a-BBO polarizers and Calcite polarizers can be used from about 220 to 900nm and 350 to 2300nm respectively.
Fuzhou Siaon Optoelectronic Technology Co., Ltd.provides Rochon Polarizers Rochon Polarizer is one of the earliest designs, which is made of two birefringent material prisms cemented together. Both ordinary and extraordinary beams propagate collinearly down the optic axis in the first prism under the ordinary refractive index.
visit
United photonics technology Glan Taylor Polarizer Glan Laser Polarizers High Transmission Glan Laser Polarizers Glan Thompson Polarizers Broadband Glan Thompson Polarizer( 200-3300nm) Wollaston Polarizers Rochon Polarizers Glan Laser prism polarizer is made of two same birefringent material prisms that are assembled with an air space. The polarizer is a modification of the Glan Taylor type and is designed to have less reflection loss at the prism junction. The polarizer with two escape windows allow the rejected beam to escape out of the polarizer, which makes it more desirable for high energy lasers. The surface quality of these faces is relatively poor as compared to that of entrance and exit faces. No scratch dig surface quality specifications are assigned to these faces. The polarized field F1 and F2 of these is shown in the plot below. Features: Air-spaced Close to Brewster's Angle Cutting High Polarization Purity Short Length Suitable for low to medium power online_ordering where the rejected beam is not required Specifications: Material:a -BBO, Calcite or YVO4 Wavelength Range:a -BBO: 200-3500 nm, Calcite: 350-2300 nm, YVO4: 400-5000 nm Extinction Ratio:Calcite:
Features: 1. Measured more quickly because the technology of buile-in micro process and quick graphic process. 2. Quick measurement for diopter of min.Pupil size. 3. New design of colorful screen(5.7" TFT LCD 4. Auto fog chart. 5. Pupil distance auto measured available. 6. Choice for vertex distance. Measuring range: Spherical -2020d(vd=12)0.12dsteps Cylinder -88d 0.12dsteps Axis 0¡×180 steps Pupil distance:45¡×85mm, 1mm steps Vertex distance:0mm, 12mm, 13.75mm Min.Pupil size 2.0mm Chart:Auto fog Display:5.7"TFT LCD Print:Thermal printer Power supply:100120v/200240v, 50/60hz Dimensiongs: 484(l)x282(w)x440(h)mm,8226mm,8226mm Weight:17kg. Export stand.
CS Mount 2.8-12mm 5-50mm 6-60mm Camera lens, Manual Zoom Varifocal Lens for CCTV Security USB Cameras, 4/6/8 12mm CS Fixed Focus lens for USB webcam Options: 1) 5-50mm CS lens 2) 2.8-12mm CS lens 3)4/6/8/12mm CS Lens 4) 6-60mm CS Lens
HD Varifocal 2.8-12mm Manual varifocal lens, HD CCTV Lens Camera Lens For Industrial Microscope CCTV Security Box Camera Description: 1) Lens type: HD CCTV Camera Lens 2) Focal length : 2.8-12mm fixed Iris , manual focus lens 3) Mount : we have two lens lount : M12 or CS mount optional 3) used for : All cctv cameras with M12 /CS mount
Optical Bypass Protection System Module OBP Module Features Wide Wavelength Range Low Crosstalk High Stability, High Reliability Modularized Design Specifications Parameters Unit SUN-OBP-SS-L Wavelength Range nm 1260 ~ 1650 Test Wavelength nm 1310 / 1550 Insertion Loss dB Typ: 1.2 Max: 1.5 Return Loss dB SM 45 Crosstalk dB SM 50 PDL dB 0.20 WDL dB 0.30 PD dark current nA 1 PD responsivity mA/W 24 ~ 40 PD report accuracy dB (at -50 to 23 dBm) Operating voltage V 4.5 ~ 5.5 Operating current mA 80 ~ 120 Operating Temperature -5 ~ +60 Storage Temperature -30 ~ +80 Dimension mm 1208018
Fusion Splicer TCW-605E of Techwin for construction and maintenance of fiber and cable We will try our best to provide products similar to Fujikura Fusion Splicer, Sumitomo Fusion Splicer, FITEL Fusion Splicer, INNO Fusion Splicer, ILSINTECH Fusion Splicer, FiberFox Fusion Splicer. How About This Product? The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance. The Uses: 1.The TCW605E Series Fusion Splicer have been using in English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc. 2.Widely used for SM and MM Quartz Fiber with diameter 80-150m(300m optional), coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less. 3.Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications. Detailed Introduction: 1.Not only a Fusion Splicer, but also your partner who make your job easy and happy 2.5.0 inch TFT color LCD monitor with anti-reflective coating 3.The advanced core to core fiber profile alignment system(PAS) 4.ARC Calibration FREE system. ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary Technical Specifications: 1.Average Splicing Loss : 0.02dB with G.652 and G.657, 0.01dB with G.651 and 0.04dB with G.653 and G.655 2.Splicing Time : Typical splicing time:8s 3.Heating Time : Typical heating time:30s 4.Return Loss : 60dB or greater 5.Fiber Coating : 100m to 1000m 6.Fiber Cladding : 80m to 150m(300m optional)
The right angle prisms are often preferable to an inclined mirror in applications involving severe acoustic or inertial loads, because they are easier to mount, and deform much less than mirror in response to external mechanical stress. As long as acceptance angle limitations for TIR from the roof faces are not exceeded, the right angle prisms can serve as a retro reflector, turning beams back to the original direction.Right-angle prism is the most common type of prisms. It is used to re-direct a beam of light at 90 degrees from the the incident direction or used as a 180 beam retro-reflector. They are often coated with various optical coatings to form cubic beam splitters and color separation cubes used in various projection systems. Specifications: Material BK7, UVFS Dimensional tolerances ±0.01mm Clear aperture 95%@central area 90 angle tolerance ±2 arcmin (General type) ±5 arcsec (Precision type) Pyramidal tolerance ±1 arcmin (General type) ±30 arcsec (Precision type) Surface quality 40-20 S-D Surface flatness
Features 1Wide pass band 2Low Insertion Loss 3High Stability and reliability 4High Channel Isolation 5Epoxy-free on Optical Path Applications 1WDM Network 2Line Monitoring 3Acess Network 4Cellular Application 5Fiber Optical amplifier Parameter4 Channel8 Channel16 Channel MuxDemuxMuxDemuxMuxDemux Channel Wavelength (nm)1270~1610 Center wavelength Accuracy (nm)0.5 Channel Spacing (nm)20 Channel Passband (@-0.5dB bandwidth (nm)>13 Insertion Loss (dB) smallest Channel Uniformity (dB) smallest Channel Ripple (dB)0.3 Isolation (dB)AdjacentN/A>30N/A>30N/A>30 Non-adjacentN/A>40N/A>40N/A>40 Inertion Loss Temperature Sensitivity (dB)
Techwin Fusion Splicer for maintenance of optic fiber www dot techwin-china dot com We will try our best to provide products similar to Fujikura Fusion Splicer, Sumitomo Fusion Splicer, FITEL Fusion Splicer, INNO Fusion Splicer, ILSINTECH Fusion Splicer, FiberFox Fusion Splicer. How About This Product? The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance. The Uses: � The TCW605E Series Fusion Splicer have been using in English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc. � Widely used for SM and MM Quartz Fiber with diameter 80-150μm(300μm optional), coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less. � Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications. Detailed Introduction: � Not only a Fusion Splicer, but also your partner who make your job easy and happy � 5.0 inch TFT color LCD monitor with anti-reflective coating � The advanced core to core fiber profile alignment system(PAS) � ARC Calibration FREE system. ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary � X/Y axes was displayed or both X and Y were displayed simultaneously, Magnification up to 300 times � 8 seconds splicing time, 30 seconds Heat-Shrinking � Battery capacity was display in real time, precisely
1.Applicable type of fibers:smf(g.652/657), mmf(g.651), dsf(g.653), nzdsf(g.655) 2.Fiber count:single to 12 3.World's first 6-direction 30 inch drop proof, tough in harsh conditions. 4.Wide color lcd monitor 5.High resolution 4.7 inch monitor with better visibility under the sun.
Applicable fibers: singlemode (g.652 & g.657), multimode (g.651), ds (g.653), nzds(g.655) 14-second automated tube heater. 5 mm cleave length for splice on connector or small package needs
SM OTDR Optical Time Domain Reflectometer, Model# FHO5000-D35 - SM OTDR - 7'' High Resolution Screen - Wavelengths: 1310/1550nm - Dynamic Range:35/33dB - Event/ Attenuation Dead zone: 1M/ 4M - Selectable Distance (Km): 4m-240km - Print Report easily - Connect to your computer with a cable - Real time & Averaging testing mode - With .sor software & A->B, B->A analysis software - Free updating software - With Black Carrying bag Specification: OTDR (MODEL# FHO5000-D35) General Parameters Testing Wavelength 1310/1550nm Dynamic Range 35/33dB Event Dead Zone 0.8m Attenuation Dead Zone 4m Pulse Width 3ns, 5ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1µs, 2µs, 5µs, 10µs ,20us Testing Range Dead zone, 500m, 2km, 5km, 10km, 40km, 80km, 120km, 160km, 240km Sampling Resolution Minimum 0.25m Linearity = 0.05dB/dB Display Resolution 0.01dB Loss Threshold Step 0.01dB Loss Resolution 0.001dB Distance Resolution 0.01m Sampling Point Maximum 128,000 points Distance Accuracy ± (1m+measuring distance×3×10-5+sampling resolution) Data Storage 40000 groups of curve Internal VFL Parameter Laser Launcher Type LD Output Power 10mW Distance Range About 12km Optical Connector FC/UPC Output Wavelength 650nm ± 10nm Modulation Frequency CW / 2Hz Physical Parameters Interface Internet port, 3 USB port Display 7 inch TFT-LCD Screen Battery 7.4V/4.4Ah lithium battery, continuous 5.5 hours Working Temp -10°C~+50°C Storage Temp -20°C~+75°C Dimension 253×168×73.5mm / 1.5kg Accessories Standard Accessories 1* FHO5000 1* Quick guide 1* USB cord 1* 12V AC/DC adapter 1* Battery 1* Software CD 1* FC adapter 1* Carrying case
A mirror is an object that reflects light in such a way that, for incident light in some range of wavelengths, the reflected light preserves many or most of the detailed physical characteristics of the original light. This is different from other light-reflecting objects that do not preserve much of the original wave signal other than color and diffuse reflected light. Material:B270, H-K9L,etc; Surface quality:40-20; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Parallel tolerance:0.002mm.
Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.
