LV series oil purifier are specially suitable for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil. Most of breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water, gas, impurities etc. LV series can rapidly remove water, gas, particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system. Features 1. Perfect capacity of removing impurities. The special filters made by NSH are made of special materials which can eliminate various impurities, water and gas effectively and rapidly. 2. Automatic reverse wash system will extend the lifetime of filters and improve the performance of the filters. 3. High performance of security system including pressure protection device and automatic temperature controller makes purifier operate safely. 4. Online work 5. Easy handling and maintenance. 6. Lower maintenance and replacement expenses 7. Small size, light weight, low noise 8. Various sizes and configurations (alloy shield) available.
Standard: Api spec 5ct standard of american petroleum institute Steel grade: J55, k55, n80, l80, n80-1, n80q p110 etc Diamensional tolerances: Types of steel tubes outer diameterwall thickness Cold-rolled tubes tube sizes(mm) tolerances(mm)tolerances(mm) 114.3a0.7912.5 114.30.5½1 Mechanical properties: Standard codesmodels of steel tubestensite strength, mpayield strength, mpa elongation, hardness Api spec 5ct j55517379½552check the table K55517655 N80689552½758 L80(13cr)655552½655n241hb P110862758½965.
NSH TF series is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. It can eliminate them effectively and efficiently. Tf series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operate in good condition. Edges of TF * perfect capacity of removing vapor, water, impurities. * automatic reverse-washing system filters. * online work. * high performance security system. * easy handling and maintenance. * lower maintenance and replacement expenses. * high efficiency and effectiveness. * small size, light weight, low noise. * available in mobile or stationary options. * various sizes and configurations (shield) available. Suitable for long-distance sea transportation.
Manufacturing method Cold Drawn or Hot-rolled Seamless, ERW, LSAW Size (OD) 4 1/2", 5", 5 1/2", 6 5/8", 7", 7 5/8", 8 5/8", 9 5/8", 10 3/4", 13 3/8", 16", 18 5/8", 20", 30¡± Grade J55, K55, N80, L80-1, L80-9Cr, L80-13Cr, C90, T95, P110, P110-13Cr, Q125 API Connections Round thread(8tpi, STC and LTC), Buttress thread (5tpi, BTC) Premium Connections HSM, TP-CQ, RJS (compatible with VAM and HSC) Length range Range 1, 2, 3 Technical modifications Special clearance; For extra clearance applications Special bevel; 20¡ãbevel Slotted (Screen casing). Bundle by steel belt with ends protector.
Regular size of tubing 2 3/8¡±, 2 7/8¡± and 3 1/2¡± with grade J55 and N80 are generally available in stock. The Vacuum Insulated Tubing (VIT) are used for wells into which the steam will be pumped to lower the viscosity of the heavy crude oil. Manufacturing method ERW, Hot-rolled Seamless Upset method 3-step forging mold, full body normalization after upset Size (OD) 1.9", 2 3/8", 2 7/8", 3 1/2", 4", 4 1/2" Grade J55, N80, L80,C90, T95, P110, Q125 API Connections Non upset (NUE), External upset (EUE), Round thread (8RD and 10RD) Premium Connections HSM, TP-CQ, RJS (compatible with VAM and HSC) Length range Range 1, 2, 3 Technical modifications Resilient seal (SR 13) with an extra Teflon ring seal. BTC connection Special clearance; For extra clearance applications Special bevel; 20¡ã bevel Internally FBE coated; Tungsten-nickel alloy electicplated anticorrosion coating; Titanium-zirconium alloy powder coating; Vacuum nitriding coating; Vacuum insulated; HDPE liner. Bundle by steel belt with ends protector.
Oil quality checker Working temperature:-5+30 Measure time: 15s Repeatability: 3 Weight+o.9 kg Power: direct-current 6 v Size: 230*295*115mm. The product can inspect the indicia of gasoline and diesel oil. Its volume is small, the operation is simple, repetitiveness is good, and the speed of inspection is quick. It can be used polish melt company, petroleum and chemical company, oil warehouse, gas station etc. As well as country quality inspection, customs officer branch.
Diesel oil cleaner Filter medium viscosity: 700mm2/s (40 f¬) at most. Precision: after filteration, to be nas1638 (gjb420-87/a) five ~ seven levels. Supply voltage: three-phase 380v Frequency: 50hz. It is suitable for hydraulic system, lubrication system, static pressure system in various professions. And also carry out cleaning to low pressure hydraulic system.
Oil quality analyzer (thy-21a) Thy-21a oil quality analyzer is a portable instrument which measures the effect of contamination by detecting changes of dielectric constant that occur in lubricants. Dielectric constant change is directly related to the degradation and the contamination level of the oil and will allow the user to achieve optimized intervals between oil changes. Oil quality analyzer also can detect the percentage of water content without standard oil sample. Main functions: 1. Determining the degree of contaminate in lubricants within 5 minutes 2. Detecting the percentage of water content in lubricants within 3 minutes 3. Detecting metal particles beyond 60 micron 4. Determining whether the newly purchased lubricant is qualified 5. Detecting the percentage of water content without standard sample oil 6. Printing the report after detecting the lubricants. Advantages: 1. Maximization and safe extension of intervals between oil changes 2. Early detection of mechanical failures in conjunction with preventative maintenance procedures 3. Avoidance of unnecessary engine damage resulting from overly used lubricants 4. Reduction in the number of costly and unnecessary laboratory analysis of oil samples. Applications: 1. Diesel engines 2. Gasoline engines 3. Natural gas engines 4. Natural gas turbines 5. Automatic transmissions 6. Any other equipment using synthetic lubricants. Specifications: Range: [0, 99.9]ua Repeatability: 3% Temperature: -15¼--+55¼ Power: 5w Voltage: 220v Weight: 5kg Size: 328*210*130mm Battery: 9.6v ni-mh rechargeable battery.
Duplex-Stereo film evaporation technology Application: Series ZY high efficiency vacuum insulating oil purifier, mainly for the power station, industrial and mining enterprises purifying the unqualified transformer oil, mutual inductor oil, switch oil and so on. Series ZY can remove water, trace water, gas, particles from oil quickly and effectively, improving oil dielectric strength. Also, this oil purifier can be used to power equipments to vacuum drying, and vacuum oiling. Features: 1.Duplex-Stereo film evaporation technology, combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil. 2. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies 3. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 4. Double-infrared liquid level sensor, pressure protective system to ensure the machine operation easy and safely. 5. Adopts interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 6. Working with BZ insulating oil regeneration device to decolor (remove acid, oxide, free carbon) and lower dielectric loss, making the treated oil more limpidity. Advantages: Series ZY is efficient and economical insulating oil purifier. Duplex-Stereo film evaporation technology, unique and advanced dewatering, degassing components, making working efficiency is 3-5 times than traditional oil purifier. Machine adopts interlocked protective system, double-infrared liquid level sensor and pressure protective system to make sure the machine work unattended, operation easy, safe and reliable.
Double-stage vacuum system, strong power of vacuum evacuating, ultimate vacuum value 5pa. Wooden case.
1. Mobile (trailer) type, completely closed structure, waterproof, dustproof, move easy. 2. Installation of car tyres, bridge shock absorber, braking system and steel welding of entire trailer guarantee 60km/h speed. 3. Dealing with unqualified insulating oils, rapidly remove water, gas, particles from oil. Wooden case.
1. Special polymer materials as filter medium with the functions of broken emulsion, dewatering, removing particles 2. Duplex-stereo film evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil. 3. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technology. 4. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. Wooden case.
1.Double primary-filter structure, large capacity for holding particles, Multi-stage filtration system to ensure high filtration precision. 2. Special polymer materials as filter medium with the functions of broken emulsion, dewatering, removing particles 3.Duplex-Stereo film evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively remove water, gas, particles and volatile matter (such as alcohol, gasoline, ammonia, etc.) 4. Automatic backwashing system, improving working efficiency. Wooden case.
GER series used oil recycling machine can recycle kinds of used engine oils including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery's lubrication oil. It has such main characteristics and advantages: 1.Two main filtering systems can ensure the GER to work continuously by batch. 2.GER machine can install the equipment to remove the bad smell of treated oil, thus it's a machine which is good for the environment protection. 3.GER can install special equipment to treat discharging gas well. 4.GER can purify the mixed used oil, but the output quantity and quality is influenced by the composition and quality of used oil 5.Low investment and high gaining. Comparing with other kind of used oil recycling machine, buyer invests less and get not less gaining. One used oil recycling machine is just equivalent to a small oil mill.
Model Power(kw) RPM(R/Min) Flow range(m3/h) EL-10000 18.5 2950 2í½7 Suitable for heavy oil and residual oil
Model Power(kw) rpm(r/min) flow range(m3/h) El-10000 18.5 2950 2í½7 Suitable for heavy oil and residual oil
Automatic lubrication system Low cost mini lubrication systems The biggest distant is valid:8m Can be directly used to lubricate point, with multipoint , only need battery, Lubricate hours (240cc)/pc: 15 days to 36months Viscosity(cst):1000 to 15000 Splitter memo Packing: 0.03 cube meter Weight(outer): 0.65kg 20'container:12594pcs 20'container weight: 1885kg
Application VFD-R series is adapt to regenerate and activate the deteriorated transformer oil. It is capable of removing the moisture, gas and mechanical impurities as well as eliminating organic acid, sludges, pitches and dissociated carbon in the deteriorated transformer oil which are difficult to be removed by conventional oil purifier plants. After the treatment, the regenerated oil can met the required standard and life span of new insulation oil. Description 1. VFD-R regeneration units adopt both physical and chemical methods. They can not only regenerate the aging transformer oil, switch oil but remove the acid, suspending materials and contaminates. 2. VFD-R regeneration units adopt special adsorbent. They can be normally run without switching off the power and changing the oil of transformer. 3. After the treatment, the transformer oil will maintain basic ingredients and anti-oxidation capacity to meet the standard of new transformer oil. Meanwhile, the CFD-R regeneration units can keep the power equipments insulating and safe by consuming only 90% maintenance cost. Technical specification After the treatment, performance of transformer oil can achieve the below specification: Breakdown voltage í¦ 75KV Flash point(close) í¦ 140íµ Soluble acid PH value =5~7 Dielectric loss tangent tg(90íµ)% í_ 0.002 Acid value í_ 0.01mgK0H/g Power: 380V/50Hz
Application: It is mainly used in regenerating the used lubricating oil, which contains large quantity of impurities and grease, such as lube oil, hydraulic oil, ditch oil ect. Features: 1. Removing large quantity of grease and impurify from the oil by employing the high speed centrifugation. 2. Great ability to break emulsification of h.P.M high molecule polymeric materials. 3. The combination and coalescing separation and vacuum duplex 3d stereo- evaporation , eliminating water. 4. Deep and highly precise fh rectangle filtering water. 5. Zhongneng's high molecule absorption materials technology. Advatages: Hydraulic lubricating oil treated by this machine contains low emulsification value, few water and impurities that it can be used repeatedly in the highly precise hydraulic lubricating equipments t home and abroad.
We manufacture TYA series vacuum lubricant oil purifier, which can well recovery kinds of waste industrial lube oils, such as hydraulic oil, gear oil, heating oil, compressor oil, machinery oil etc. Why we need recycle the waste lubricant oil? Re: As the resource of petroleum is very valuable and quite limited in the world, besides, as the quantity of petroleum resource is reducing, the oil price is going more and more higher, so we must pay more attention for recycling the used and waste lubricant oils, and find the way to reuse it. What can TYA series oil purifier do on waste lubricant oils? Usually, most waste lubricant oil just contaminated with water, gases and kinds of impurities when it was used on machines, some are emulsified and change its color into white, looks abnormal from new oils. Anyway, this kind waste oil still can be reused after purified with our TYA series oil purifier. It adopt advanced technology for combination of coalescing separation and vacuum dewatering, to get the high precise of water and gas content. Using distinctive removing impurities system, filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power, can ensure the cleanness of purified oil reach NAS6. What else advantages of TYA series compare with other kinds vacuum models? First, it is applied unique demulsification system adopted Japanese H.P.M demulsification devices that are made of high-molecule polymeric material, which can demulsifying the waste lubricant oil more effectively; Second, the application of bi-infrared liquid level autocontrol system and a trio of interlocked preventive devices will ensure you the safefy of TYA operation; Last, it designed with trapezoidal, spiral,automatic back flushing system, it can wash dirty filter element automatically after some time operation, no need to take the filter element out for cleaning, and the filters are not one time use, but can use for very long time, which will greatly save your cost.
