Fischer Tropsch wax is mainly composed of linear and saturated high carbon alkanes with relative molecular weight of 500-1000, which gives this chemical fine crystal structure, high melting point, narrow melting point range, low oil content, low penetration, low mobility, low melting viscosity, hardness, wear resistance and high stability. Usages:These products are widely used in textiles,plastics industry,Ink and coating,adhesive. Properties Properties Unit SYY-52 SYY-60 XTFT-70 XTFT-80 SYY-90 SYY-95 SYY-100 XTFT-105H SYW-115 Melting point 53 62 74-78 80-86 90 81-101 82-102 102-103 112.5-117 Penetration 0.1mm/100g 5s at25 50 25 10-18 10-18 10 5 4 12.2 1 Oil content 15 7
Automotive Dashboard and Leather Wax Spray Contains silicone UV resistant Cleans and Restores For Rubber and Plastic Scented spray Factory supports OEM order Lemon/Strawberry/New Car/Jasmine/Lavender/Vanilla and more 300ml/450ml/750ml
We supply Petroleum By Products at a good rate. buyer need to bring his own ship. no bank instrument is required. 105$ per MT. 7000 MT loading per day. we have crane for loading purpose on port. 50,000 MT maximum . direct bring ship and payment after loading .
Industrial Vaseline Parameter Specification Result Appearance White or Yellowish Translucent soft unctuous,odorless,has certain drawing Complies Melting Point 45-60°C 58°C UV Absorbance 0.50 (290nm) 0.143 ConePenetration (0.1mm) 122 Residue on ignition 0.05% 0.032 Sulfide 0.00017% Complies Acidity or Alkalinity Plus phenolphthalein colorless and methyl orange can not show pink Complies Density 0.815-0.880 (60°C) 0.832 Organic Acids Show red Complies Fixed oils, fats&Rosins No ppt or oily matters is produced Complies Heavy metal 0.003% Complies Arsenic salt 0.0002% Complies Polycyclic aromatic hydrocarbons Absorbance at 260-420nm not more than the absorbance at 278nm Complies
Medical Vaseline Parameter Specification Result Appearance White or Yellowish Translucent soft unctuous,odorless,has certain drawing Complies Melting Point 45-60°C 59°C UV Absorbance 0.50 (290nm) 0.148 ConePenetration 130-230 (0.1mm) 148 Residue on ignition 0.05% 0.031 Sulfide 0.00017% Complies Acidity or Alkalinity Plus phenolphthalein colorless and methyl orange can not show pink Complies Density 0.815-0.880 (60°C) 0.837 Organic Acids Show red Complies Fixed oils, fats&Rosins No ppt or oily matters is produced Complies Heavy metal 0.003% Complies Arsenic salt 0.0002% Complies Polycyclic aromatic hydrocarbons Absorbance at 260-420nm not more than the absorbance at 278nm Complies
The alcohol fuel is the fuel that is configured with alcohol (e.g. methanol, ethanol, butol, etc.). It exists in liquid or solid form. It is also a biomass energy, like nuclear, solar, wind and hydro, and a clean and environmentally sound energy that Governments have promoted. In the face of the depletion of fossil energy, alcohol fuel is the most potentially new alternative energy source, and is favored by corporate organizations in various countries. The production of alcohol-based fuels is easy and can be made available as alcohol wine in the future. There are two kinds of wines, one for drinking, and one for burning is alcohol fuel. The way of existence It exists in liquid or solid form Energy type Clean energy Alcohol-based fuels are fuels that are mainly configured with alcohols (such as methanol, ethanol, butanol, etc.). It exists in liquid or solid form. It is also a kind of biomass energy. Like nuclear energy, solar energy, wind energy, and hydropower, it is an environmentally friendly and clean energy that governments around the world have vigorously promoted. Facing the depletion of petrochemical energy, alcohol-based fuels are the most potential new alternative energy sources. Favored by enterprises and organizations of various countries. Alcohol-based fuels are easily available in production, and will be available like alcoholic wine in the future. In the future, there will be two kinds of alcohol, one for drinking, and the other for burning, which is alcohol-based fuel. Our factory works already use this alcohol-based fuel for 1 year. No damage for car parts, no harm for environment, people use this fuel on Ferrari, BMW X6 etc.
Quick Details Classification: Chemical Auxiliary Agent Other Names: Silicone oil MF: (CH3)3SiO[SiO(CH3)2]nSi(CH3)3, (CH3)3SiO(Si(CH3)2O)nSi(CH3)3 Purity: 99%, 100% Place of Origin: Anhui, China Type: Colorless transparent Usage: Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents Brand Name: Qiangli Model Number: QL 200--DM50 Product name: Polydimethylsiloxan Brand: Qiangli CAS: 9016-00-6 Color: Colorless Transperant Use: Cosmetics material Certification: ISO9001 Viscosity: 50cst 100cst 350cst 500cst 1000cst Package: Drum
Please contact us for more informations
Tung oil is a type of wood finishing product that is derived from the pressed nut of the tung tree. Tung oil is drying oil that is similar to linseed, safflower, poppy, and soybean oil. Drying oils are perfect for wooden objects, since the oil dries to a clear film once it has made contact with the air. Pure tung oil and tung oil finishes are two distinct products that should not be confused with one another. Tung oil, also known as China Wood Oil, Lumbang oil, Noix dâ??abrasin (fr.) or simply wood oil, is made from the seed kernels of the Tung tree (Aleurites fordii and Aleurites montana, family Euphorbiaceae). Tung oil was used as a preservative for wood ships. The oil penetrates the wood, then hardens to form an impermeable hydrophobic layer (repels water) up to 5 mm into the wood. As a preservative it is effective for exterior work above and below ground, but the thin layer makes it less useful in practice. Item Specifications Color:7-10 Refractive index(20):1.5160-1.5225 Acid value(mgKOH/g):5-8 Iodine value:163-173 Washer off Experiments(282):7.5minutes max Specific gravity(20/4):0.9360-0.9395 Saponification value:190-196 FFA2.5%4% max Moisture & impurities combined:0.3% max Package: 1) by 190kgs/iron drum,80drums/15.2mts/20 FCL 2) by 950kgs/ibc tank ,20IBC /19MTS/20 FCL 3) by flexitanks of about 19-21mts/20 fcl 4) by isotanks of about 20-22mts/20 isotank.
Soy wax is a vegetable wax made from the oil of soybeans. After harvesting, the beans are cleaned, cracked, de-hulled, and rolled into flakes. The oil is then extracted from the flakes and hydrogenated. The hydrogenation process converts some of the fatty acids in the oil from unsaturated to saturated. This process dramatically alters the melting point of the oil, making it a solid at room temperature. The leftover bean husks are commonly used as animal feed.
CAS: 8030-30-6 EINECS(EC#): 232-453-7 Molecular Formula: C6H6 abby(at)gxsjjck dot cim erin(at)gxsjjck dot cim Formula Weight: 78.11184 Appearance: Reddish-brown mobile liquid Hazard Class: Quality standard: USP Version: May 03 2020
Micronized Wax has ultrafine particle size, high melting point, outstanding grindability and smoothness, good recoatability, breathability. Micronized Wax has good mixing compatibility and dispersion. It used in solvent coatings, powder coatings and ink with excellent smoothness, wear-resisting and anti-scratching. Usageï¼? Micronized Wax has good compatibility with ink and coating system. It is widely used in wood coatings, plastic coatings, powder coatings, coil coatings, UV light curing coatings, etc. Features: - Acts as a degassing agent in powder coatings - Excellent anti-blocking and slip properties - Good scratch resistance properties - Increased matting - High water repellent effect - Improved sand-ability of wood coatings - No influence on the transparency of polymers - Excellent dispersion and lubricating properties in plastics applications We can produce micronized waxes with melting point at 52-325, and hardness at 0.5-15dmm.
Usage :Fischer-Tropsch Wax for Hot Melt Adhesive, PVC, Master-batch, Road Marking Paint PACKING :25 KG Valve bag / 980KG Jumbo bag Properties Test Method Specification Drop point ASTMD3954-94-2004 107 Viscosity,mm2/s at120 ASTM D445-2009 11.3 Viscosity,cps at140 Brookfield 6.7 Penetration,0.1mm/100g,5s @25 ASTM D1321-2010 3.8 Oil content ASTM D721-2006 3.2% Size,40mesh GB/T 6005-2008 92%
Usage :Fischer-Tropsch Wax for Hot Melt Adhesive, PVC, Master-batch, PVC Stabilizer, Road Marking Paint PACKING :25 KG Valve bag / 980KG Jumbo bag Properties Unit Specification Solidifying point 100-109 Drop point 110-119 Viscosity mm2/s at120 18-35 Penetration 0.1mm/100g 5s at 25 Max.2 Oil content % wt Max.0.2 Size,16mesh - 85%
Advantages: 1. This product can completely replace domestic paraffin and suitable for particle board production process. 2. This product can effectively enhance particle board waterproof moisture absorption performance. 3. This product can prevent the particleboard when facing agglutination adhesive solution excessive infiltration phenomenon. 4. The product is powder state, facilitate feeding and subsequent processing, energy conservation, environmental protection, customers can save 30% of the cost of production. 5. We can provide customers with professional custom emulsification of form a complete set of product solutions.
Fischer Tropsch Wax Properties Test Method Specification Drop point ASTMD3954-94-2004 102-103 Oil content ASTM D721-2006
Usage :Fischer-Tropsch Wax for Hot Melt Adhesive, PVC, Road Marking Paint PACKING :25 KG Valve bag / 980KG Jumbo bag Properties Test Method Specification Drop point ASTMD3954-94-2004 102-103 Oil content ASTM D721-2006
Usage: Powder Paraffin Wax for rubber, toner PACKING :25 KG Valve bag / 980KG Jumbo bag Properties Test Method Specification Melting point ASTMD3954-94 73.1 Viscosity,mm2/s at100 ASTM D445 7.0 Size,16mesh GB/T 6005 â?¥95%
Usage: Candles, Grease, Oil pastels, Petroleum jelly Properties Unit Specification Melting Point 65.5-76.6 Oil content % wt Max.10 Penetration 25 ,100g,5sec Max.100 Color - Max.L1 Proportion 15/4 0.82-0.84 Flash point Min.200 Viscosity cSt 7-15 Packaging Kg (bag) 25
Fischer Tropsch Wax Properties Test Method Specification Drop point ASTMD3954-94-2004 107 Viscosity,mm2/s at120 ASTM D445-2009 11.3 Viscosity,cps at140 Brookfield 6.7 Penetration,0.1mm/100g,5s @25 ASTM D1321-2010 3.8 Oil content ASTM D721-2006 3.2% Size,40mesh GB/T 6005-2008 92% PACKING :25 KG Valve bag / 980KG Jumbo bag