This product uses fully synthetic base oil and a new formula of imported multi effect composite agents from China and the United States.It is made using the most advanced international automated modulation new technology through high shear homogenization and high-density filtration modulation. It has a strong cleaning effect and effectively inhibits the formation of carbon and sludge in the engine. The new low phosphorus formula extends the rated service life of the exhaust gas purification system. Super-span multi-stage gasoline engine oil, excellent high and low temperature performance, all-weather. prolong the service life of the engine. Excellent oxidation resistance, high shear resistance, excellent sealing and lubrication at high temperatures, effectively improving fuel economy. Reducing noise makes the engine more resistant to the test of road congestion and frequent stops and starts in modern traffic conditions. With unique fuel-saving function, even if the engine leaks oil in special circumstances, it can continue to drive to the maintenance point. Driving about 50 kilometers with blue smoke from the engine can also be repaired. Low noise, extended oil change cycle.
This product uses fully synthetic base oil and a new formula of imported multi effect composite agents from China and the United States. It is made using the most advanced international automated modulation new technology through high shear homogenization and high-density filtration modulation. It has a strong cleaning effect and effectively inhibits the formation of carbon and sludge in the engine. The new low phosphorus formula extends the rated service life of the exhaust gas purification system. Super-span multi-stage gasoline engine oil, excellent high and low temperature performance, all-weather. prolong the service life of the engine. Excellent oxidation resistance, high shear resistance, excellent sealing and lubrication at high temperatures, effectively improving fuel economy. Reducing noise makes the engine more resistant to the test of road congestion and frequent stops and starts in modern traffic conditions. With unique fuel-saving function, even if the engine leaks oil in special circumstances, it can continue to drive to the maintenance point. Driving about 50 kilometers with blue smoke from the engine can also be repaired. Low noise, extended oil change cycle.
Bonny Light Crude oil (BLCO) Quantity Bonny light crude oil (BLCO) 2 000,000 barrels (Two million barrels) +/-10% X at Sellers Option; X 12MONTH ,Shipped in one vessel per LOT . Minimum quantity of 1 million barrels. SPECIFICGRAVITY: 0.8459 API AT 60 DEG.F: Min 33.0 - Max 37.00 +/- 5%(ASTM D-1298) WATER CONTENT BY DISTILLATION: 0.2%(ASTM D-4006) POUR POINT DEGREES: BELOW 40 (ASTM D-97 SULFUR WEIGHT%: 0.14 (ASTM D-139) SALT CONTENT PARTS PER BILLION: (ASTM D-526) REID VAPOR PRESSURE (P.S.I.G.): 6.52 (ASTM D-529) KINEMATIC VISCOSITY @ 30 DEG.: 2.2(ASTM D-523) DISTILLATION INITIAL BOILINGpoint (IBP): 35 DEG.C (ASTM D-86) DISTILL TO 175 DEG.C VOL.%: 35.5 DISTILL TO 250 DEG. C VOL.%: 51.5 DISTILL TO 300 DEG. C VOL%:60.5 COLOUR: Dark Brown
We are a crude oil manufacturer from Oman and can provide light/heavy crude oil to the world. Our licenses, qualifications, procedures, inspection reports, qualifications and other information are complete and verifiable, and we can support offline oil factory office interviews. Please provide the buyer with quantity, destination port, transaction method and other information.
Red Clay Bricks Produced By Double Stage Vacuum Extruder Automatic Brick Plant With customizable Size. Product Details: Place of Origin: CHINA Brand Name: Halstec Certification: ISO9001 Model Number: JKY75 Payment & Shipping Terms Minimum Order Quantity: 1 Set Price: Negotiation Packaging Details: Nude in the container Delivery Time: within 120 days Payment Terms: L/C, T/T Supply Ability: 1 set per month
We are looking for buyers of Bony light crude oil, currently we have 4 million barrels of Bony Light Crude Oil available for sale. Also, looking forward for future cooperation. If you are interested in exploring this opportunity further or have any inquiries, please do not hesitate to contact us. We would be delighted to provide you with additional information or discuss the terms of a potential agreement.
SINO-NSH Vacuum Lubrication Oil Purifier LV series is particularly suitable for purifying turbine lubricating oil. It also applies to treat hydraulic, coolant oil and other lubrication in which contain large amount of water and others such as vapor, impurities, sludge, dielectric and colloid. NSH-LV series will result in the improvement of the properties of turbine oil or other lubrication and extend the maintenance period of turbines or other equipment which have lubrication system and keep them operate in good condition.
Even carrying through regular maintenance carefully installation and operation, the insulation oil may also be contaminated. The electrical equipment would fall in troubles as the declining of the oil�¢??s insulation trait. The expenses and time spend in maintenance of the electrical equipment would far more than that of the insulated oil. The use of Vacuum Transformer Oil Purification and Regeneration Plant is necessary, which will help you maintain optimal oil cleanliness. VFD-R series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters, and remove colloid, pitches and sludge etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, cable and capacitors which has insulation system.
NSH VFD series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, cable and capacitors which has insulation system. VFD series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Sino-NSH-DPCS is an oil filtration and lubricating station with dual system to ensure continuous operation. It is widely used for lubricating the blower, besides it can be used as lubricant for the machine with similar function as blower or motor. It uses for supplying lubricant to blower, motor or other mechanic equipment which will reduce the attrition and make the equipment cool, so then the equipment can run continuously.
Sino-NSH-LF oil flushing system is used to remove harmful contaminants for a large oil system, such as hydraulic control systems, rotating equipment lubrication system, and turbine/generator unit, etc. It will keeps the equipment operating at peak performance and reducing the potential for failure. NSH oil flushing system adopts American advanced fast flushing the system, It not only can purify particles, fibers, clay, or even water and a variety of pollutants in the oil, but also a large number of oil need for rapid purification of the occasion. LF series has high efficiency, low cost, easy operation, safety and reliability.
Sino-NSH-GED-WB is designed to process and recycle waste oils, thereby to acquire high quality base oil. Sino-NSH-GED-WB adopts the advanced technology of vacuum distillation, can effectively remove wearing debris, pitches, waxes, impurities, water, carbon deposits, oxide from the waste oil, as well as decrease the acid. The base oil acquired is with high quality that can meet the standards and requirements for blending various industrial lubrication oils. During the distillation process, a powerful vacuum pump system provides a stable vacuum, the hydrocarbon chain breaks to reform new molecule of the oil, and turns into oil mist. Then it turns to liquid oil by effective condensation. Exhaust gas treatment device is equipped to ensure that emissions gas strictly meets environmental requirements. Sino-NSH-GED-WB is the upgrade model of NSH-GER, saves operating costs and increase oil recovery rate, it can reach high rate above 90%. In addition, NSH-GED-WB has a wider range of applications, can be used to process almost all waste oils, such as engine oil, hydraulic oil, gear oil, etc. Both single oil or oil mixture can be processed and recycled by the system. Various capacities are available for this system to meet different needs of customers, and a variety of heating methods also allow customers to choose according to actual needs.
Sino-NSH-GER is regeneration system for waste engine oil including diesel engine oil, gasoline engine oil, as well as used hydraulic oil and some other machinery's lubrication oils. Sino-NSH-GER is designed with the combination technology of physical and chemical processing, can effectively remove aging products and contaminants from used oil. Physical processing method can remove solid particles, water, gas, etc. Chemical processing method allows removal of colloid, oxide, pitch in the used oil. Specially, this system can restore the color of used oil and remove the scent rapidly. Sino-NSH-GER is an environmentally friendly system, abandon traditional acid processing method, effectively solve the environmental pollution caused by the old technology of waste oil recycling. Various options are available for this system to improve the automation of operation.
Sino-NSH-PF is a portable multi-stages high precision oil purification equipment. Sino-NSH-PF is mainly used to the negative mechanical impurities. Because of flexibility and portability, it is widely used in the fields of power station, petrochemical industry, metallurgy, mechanical engineering etc. For oil filling, oil pumping as well as high precision purifying and pipe cleaning.
Sino-NSH-LV is a dehydration and degassing unit with thermal and vacuum processing. It is a multifunctional purifier which can treat various kinds of lubricant oils. Sino-NSH-LV is mainly used to remove dissolved and free water, and particulate impurities effectively so as to increase special index of lubricant oil. Combining with vacuum system, the multi-stage filtration system adopts a high dehydration efficiency . It has a strong anti-emulsifying capability, which could separate the large amount of water from oil and the trance water from oil. The clearness of final oil can be under 6 NAS and water can be under 100 PPM after processing with our machine. Sino-NSH-LV maintains an optimized structure and safe controls so as to meet comprehensive requirement of transformer manufactures and service companies.
Sino-NSH-TC is a complete oil purification system integrating vacuum oil purifier and centrifugal separator, widely used for the filtration and purification of turbine oil, as well as other lubrication oil. Sino-NSH-TC adopts vacuum and centrifugal technology, designed to meet the device needs of customers. It can effectively remove free water, dissolved water as emulsified water, reduce the water content to less than 100 PPM. Also remove the particulate contamination from oil with high precision centrifugal separator. centrifugal separator is able to remove 99.995% of solid contaminants and 99.4% of water. Various capacities are available for this system, and some optional device such as PLC Control system, Container structure,etc.
Sino-NSH-TF-Z is a dehydration and filtration unit, especially suits for purification of turbine oil and fuel,etc. Sino-NSH-TF-Z combines the latest innovations in coalescence separation technology and micro-glass filter media in one system to achieve optional fluid cleanliness. With specially designed filter elements, it can efficiently separate water from oil quick, break the emulsification, as well as remove particulate pollutants. After separation, the water content can be reduced to less than 100 PPM, and the cleanliness can reach or better than NAS 4-6 Grade. Sino-NSH-TF-Z can effectively save operating cost as no heating or vacuum is required, and it is designed for continuous operating and unattended operation.
Sino-NSH-TF-A is fully automatic unit developed based on NSH-TF, realize the intelligence of the machine and simplify the operation. Sino-NSH-TF-A utilizes the brand programmable logic control and a series of instrumentation, alarms and interlocks to provide a fully automatic operation. Manual control of various functions is provided are required. Several Pilot Lights are provided to indicate operations status of key components and alarm conditions. With full scale of on-line testers and detectors as option, Sion-NSH -TF-A could implement accessible and reliable solutions for unique request and practical usage.
Sion-NSH-TF-E is explosion-proof type designed for flammable and combustible working conditions in power plant, petroleum, chemistry, coal mining, metallurgy and other industries. Sion-NSH-TF-E adds an explosion-proof system compare to NSH-TF, using comprehensive explosion-proof technology. The components such as heating system, electric control system, motor and solenoid valves etc are well-selected explosion-proof type adapt to different danger lever.
Sion-NSH-TF is a filtration and dehydration unit with thermal and vacuum processing. It is ideal for filtration and dehydration of turbine oil. This units can extend turbine oil life by removing contaminates from oil, such as water, gas and particulates, improve the oil properties. Sion-NSH-TF combines vacuum dehydration technology and coalescence technology, can effectively remove both emulsified and dissolved water from turbine oil. Fitted with specially made emulsifying device, it is capable of making turbid emulsified oil very clear. Multi-stage precision filters minimizes impurities and ensures oil cleanliness, which can reach or better than NAS 6 Grade. TF series is particularly suitable for purifying turbine lubricating oil. It also apply to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operate in good condition.
