Scope Kerosene smoke point tester is based on the standard gb / t382-83 (91) "determination of the smoke point of kerosene" design and manufacture. The maximum height for the determination of the lamp with kerosene and jet fuel smoke point, that the sample in a standard fixture, smokeless flame under specified conditions of, expressed in millimeters. Features 1, kerosene smoke point tester uses millimeter scale background, you can clearly read the data 2, the entire instrument is compact structure, complete 3, kerosene smoke point tester using plug-type structure, more convenient to replace the wick 4, kerosene smoke point tester using a special glass observation window, easy to operate 5, kerosene smoke point tester simple operation, high measurement repeatability Technical parameters 1, the scale: ruler should on the black glass with white flags, their white or black stripes central 2 mm will be divided into bisecting vertical ruler. Ruler measuring range should be 50 mm, 1 mm division. Every 10 mm on the digital standard, with each 5 mm long marking. 2, wick catheter: top wick catheter should be exactly at the same level with the zero on the scale. 3, the lift base: total distance of not less than 10 mm stroke, moves smoothly and evenly. 4, ? reservoir oil: oil reservoir mainly by oil storage body, wick pipes and air ducts, etc., whose critical dimensions conform to gb / t382, oil storage body diameter size ?21.25 ± 0.05, length of 109.0 ± 0.05; wick tube diameter ?4.7 ± 0.05, length of 82.0 ± 0.05; air duct diameter size ?3.5 ± 0.05, length of 90.0 ± 0.05.
Scope Lubricants determination of aging characteristics is based on the requirements of sh / t0192 gb / t12709 test method for design and manufacture. Determination of aging characteristics suitable for the lubricating oil.It includes two methods: a method: through air aging conradson carbon value method. Method b: in the presence of ferric oxide through the air after aging conradson carbon method. Features 1, the instrument consists of a temperature control section, part of the metal bath, air flow regulator components. 2, the control circuit uses digital temperature control table, high precision temperature control, display accurate. 3, the heating body is made of aluminum bath, and an insulating layer and the insulating protection, rapid heating. 4, the actuator using solid state relays ssr, with no contact, no action noise, no spark, long life and other characteristics. Technical parameters 1. Input power: 1000w 2. Power supply: ac220v / 50hz 3. Test temperature: 200 ? 4. Temperature accuracy: ± 0.5 ? 5. Temperature range: room temperature ~ 200 ?
Scope Engine coolant foam tendency analyzer according to people's republic of china petroleum and chemical industry standard sh / t0066 requirements "of the engine cooling foam determination" provides design. It is applicable to the determination method according to sh / t0066 standard, It can be measured diluted or concentrated engine cooling liquid foam. Features 1. Integrated design, easy to operate; 2. With automatic timing device, easy to operate, can also set up their own; 3. Using quick water valve design, to facilitate the replacement of the bath; 4. Test cup quick plug design, fast, stable, safe; 5. Using the precision flow meter control flow, the user at any time adjustable; 6. Using a professional air pump gas supply, stable airflow, noise-free 7. The engine cooling liquid foam tendency analyzer embedded drying system, replacement desiccant convenient, beautiful. Technical parameters 1. Power supply: ac220v ± 10%, 50hz; 2 .Heating power: 2000w; 3. Air flow: precision flow meter control; 4. Measuring range: room temperature ~ 99.9 °c; 5. Time: automatic timing, you can set your own; 6. Ambient temperature: -10 ~ +40 °c; 7. Relative humidity: 85%.
Scope Petroleum wax oil content analyzer is designed and made as per the national standard of people’s republic of china gb/t3554 and sh/t0556-93 standard “test methods for oil content of petroleum wax" (mek - toluene) Features 1, imported compressor refrigeration, a total of four cold trough, can be grouped on two samples tested 2, using a standard glass tube, to meet gb / iso requirements 3, the cold bath and the water bath temperature regulation and control of evaporation are used in digital temperature controller, precise temperature regulation and control. 4, evaporation plant air flow by the glass rotor flowmeter detector, can be precisely controlled flow, blowing time according to the time test requirements arbitrarily set by a timer within 60min. Technical parameters 1. Power supply: ac 220v±10%, 50 hz 2. Temperature of melting bath: room temperature~90±5°c 3. Cold bath temperature: -35°c±1°c 4. Evaporation temperature: 35±1°c 5. Flow rate: 2~3l/min 6. Timing range: 0~60min
Scope Applied standards: SH/T0109, ASTMD1264, IP215 Applied scope: testing grease resistance to water. The grease sample loaded ball bearings, ball bearings and the bearing sleeve is provided with provisions within the gap, and turn to 600r/min + 30r/min speed. The control water in 38 DEG C or 79 DEG C to speed spray of fixed at 5ml / S + 0.5mL/s in the bearing sleeve, to within 60 min by water to wash away the grease quantity to measure the anti leaching ability of water of the grease. Features 1. Water Washout Characteristics of Lubricating Greases is mainly composed by the temperature control system, water spray circulatory system, the transmission mechanism, white molten steel bath and shell Circulation system includes constant velocity carbon bearing gear pump, valves and flow meter directing a controlled water flow to a capillary (1mm) spray nozzle aimed at the bearing housing. Rugged 1/3hp drive motor rotates test bearing at600rpm while driving the circulation pump. A two pulley system permits independent pump operation to circulate water while heating it to test temperature. Mounted on a finished steel base with locating; 2. Using PID temperature control system thermostatic bath temperature control, temperature control range from room temperature to 100°C, a temperature control accuracy of ± 2 °C; 3. Visual display of set temperature and the actual temperature, easy temperature setting and the temperature difference correction; 4. The water spray circulatory system imported miniature magnetic circulation pump, low noise, long hours of continuous work; 5. Grease resistance to water washout analyzer transmission mechanism from the motor through a belt driven set of the bearing assembly; 6. Design aesthetic appearance, generous, reasonable structure design, easy to operate, the measurement accuracy of the results. Technical Parameters 1, digital temperature control, temperature control range: bath temperature to 100°C, the temperature control precision is + - 1°C 2, precision velocity control system of water jet flow: 5 + 0.5ml/sec 3, bearing speed: 600 + 30r/min, specifications: 204 type bearing 4, input power: 1000W
Scope Petroleum product sulfur content analyzer (x-ray spectroscopy) is in accordance with people's republic of china standard gb / t11140, gb / t17040, astm d4294 requirements specified in design and manufacture of this instrument for the determination of trace sulfur content of petroleum products. Because it uses physical analysis methods, with fast analysis without complicated sample pretreatment, high precision, human error is small, low labor intensity of operators, no pollution, it has been widely used and generally replace other measuring sulfur in the international arena the analytical method. Features 1, with full english operating system, the man-machine interface friendly exchanges. 2, short detection time, automatic test results within 30 seconds; automatic c / h ratio correction, for a variety of samples; 3, large-screen lcd, automatic print measurement data; 4, using the x-ray tube excitation, the instrument can be long-term use, without affecting the source attenuation; 5, the use of physical methods, the analysis does not touch, do not destroy the sample, no chemical reagents; 6, instrument with integrated design, easy maintenance; Technical parameters 1, the scope of analysis: s analysis range can be adjusted by the calibration curve of the selected method. 2, the scope of analysis width: s% max-s% min=9.999%; such as oil: s: 0.001 ~ 9.999%. 3, the inherent error, accuracy of analysis: such as oil: in line with the national standard gb / t 17040, at the same time meet the relevant requirements of american national standard astm d4294. 4, system analysis time: 1 to 999 seconds, the recommended value of 60 seconds. 5, detection limit: 10ppm 6, using the conditions: ambient temperature: 5 ~ + 40 ?, relative humidity: =85% (30 ?), power supply: 220v ± 20v, 50hz. 7, total power consumption:
Scope FDQ-0301 laser particle size analyzer based on physics Fraunhofer diffraction and Mie scattering theory basis. This theory can be simply understood as: travels in straight lines parallel laser beam blocking particles encountered in the communication process, the phenomenon of diffraction and scattering, and small angle light scattering large particles, small particles of light scattering angle is large. Figure 1-1 shows the diffraction pattern formed by individual particles, the larger the particle diameter, the smaller the center of the bright ring, the smaller the particle diameter, the larger the center of the bright ring. Use photo detector array receiving light at different angles, for the corresponding angle, its energy is set corresponding to the diameter of the particles occurs diffraction (scattering) caused by the respective other angle light will reflect the strength of the corresponding diameter of the particles throughout the assembly of particles occupies proportion, according to the intensity of the received scattered light at different angles, you can perform anti-particle distribution of the sample between the relative content and various size fractions. Features 1. Up to 82 sampling channels to improve the resolution of the test results; all the photovoltaic device fabricated on a single silicon chip, to ensure the life of the photovoltaic array; cross-sector arrangement, increasing the light receiving area, improves the sensitivity ; 2. micro injection method, using a peristaltic pump automatic loop injection mode, using siphon pump automatic cycle injection mode, to meet different customer test requirements, the instrument comes standard MS-01 micro-injector device; 3. The single lens full scale measurements, all optical components are mounted on reinforced base before fastening a good optical system is shipped, the instrument more stable performance; 4. Imported semiconductor lasers, has a long life, stable optical parameters, not afraid of vibration and a series of advantages, continuous working time of up to 24 hours, to meet user requirements for large continuous load test. Technical Parameters 1, the test range (um): 0.15-400; (0.4-1100,0.1-450,0.25-650, 0.4-1100) 2. Repeatability:
Scope The instrument used by the gb / t265-88, iso3104, astmd445, ip71 requirements, determination of liquid petroleum products (newton liquid) kinematic viscosity in units of m2 / s, usually mm2 / s in practice. Dynamic viscosity of the liquid at a constant temperature measured kinematic viscosity and density of the product at the same temperature of the liquid. Features 1, innovation introduced the us imports xecom data processing chip, fast and accurate data processing 2, large-screen lcd display, english prompts input interface, easy operation, quick 3, automatic detection, automatic extraction experiment, automatic detection, automatic calculation, automatic storage, 4, fld special photoelectric detection system, high-precision test results 5, configuration, self-diagnosis and protection function, easy maintenance 4, the detection member is a separate standard configuration, ready to install and uninstall detection unit for easy inspection, cleaning, storage and future upgrades Technical parameters 1, display: tft true color large screen display 2, the detection system: fld special detection equipment, high temperature resistance, corrosion resistance, high stability 3, chip processing: us chip imports xecom 4, detection method: an infrared detector, automatic detection 5 power supply: ac 220v ± 10%, 50hz 6, temperature control point: 40 ?, 50 ?, 80 ?, 100 ?, temperature control accuracy: ± 0.1 ? 7, the results of printing: automatic print report
Conductive graphite is made by our company using international advanced processing technology. After graphite is processed by a special process, it has high conductivity, plasticity and chemical stability of acid and alkali resistance and organic solvent corrosion.
Graphitized petroleum takes petroleum coke as raw material, puts petroleum in graphitization furnace, and makes it through graphitization processing technology, and has the same performance and physical and chemical indexes as the products produced by traditional production technology.Let all customers with our cooperation truly feel Use: (1) additive of metallurgical industry. (2) materials of flexible graphite. (3) absorbent materials of battery. (4) additive of lubricant. (5) additive of refractory.
Product name cas no application 1dmtd/dmct 1072-71-5metal deactivator 2th56113539-13-4metal deactivator 3t56159656-20-1metal deactivator 4thx512b72676-55-2ep/aw additive 5tdds51988-14-8cpe, cm vulcanzing agent 6mtt 1908-87-8cr vulcanzing agent 7tcy 638-16-4vulcanzing, crosslink agent 8taic 1025-15-6cross linking agent 9tmt-na17766-26-6water treatment chemical 10mbt-na 2492-26-4corrosion inhibitor 11dmtd-2k4628-94-8corrosion inhibitor 12dmtd-2na55906-42-8corrosion inhibitor 13bibp025155-25-/2212-81-9cross linking agent 14tmptma 3290-92-4cross linking agent 15mmtd29490-19-5cefazolin sodium intermedia
Our company is specialized in 52%-64% brucite magnesium oxide(MgOH2),80%-97% caustic calcined magnesite(MgO), dolomite, Fused Magnesite Large Crystal, magnesium sulfate (MgSO4, MgSO4.H2O, MgSO4.7H2O). Do we have a chance to do business with you which possesses about two-fifths of the total reserves of in 30 years professional manufacturing, more than 20 years export experience, more than 70 million ton annual output per year,
Application: It has good compatibility with ink and coating system. It is widely used in wood coatings, plastic coatings, powder coatings, coil coatings, UV light curing coatings, etc. Features and Benefits: 1.High water repellent effect 2.Improved sand-ability of wood coatings 3.No influence on the transparency of polymers 4.Excellent dispersion and lubricating properties in plastics applications We can produce micronized waxes with melting point at 52-325 C, and hardness at 0.5-15dmm. Properties Unit Specifications Melting point C 114-118 Density g/cc 0.94 Hardness d-mm 1.0 Average particle size m 6-9 Maximum particle size m
Application: It has good compatibility with ink and coating system. It is widely used in wood coatings, plastic coatings, powder coatings, coil coatings, UV light curing coatings, etc. Features and Benefits: 1.Acts as a degassing agent in powder coatings 2.Excellent anti-blocking and slip properties 3.Good scratch resistance properties 4.Increased matting We can produce micronized waxes with melting point at 52-325 C, and hardness at 0.5-15dmm. Properties Unit Specifications Melting point C 114-118 Density g/cc 0.94 Hardness d-mm 1.0 Average particle size m 5.5-6.5 Maximum particle size m
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production. Properties Unit Test Method Results Melting point C GB/T 2539 68-70 Oil content GB/T 3554 0.8 Color GB/T 3555 25 Light stability SH/T 0404 5 Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production. Properties Unit Test Method Results Melting point C GB/T 2539 68-70 Oil content GB/T 3554 0.8 Color - GB/T 3555 25 Light stability - SH/T 0404 5 Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production. Properties Unit Test Method Results Melting point C GB/T 2539 60-62 Oil content GB/T 3554 0.8 Color - GB/T 3555 25 Light stability - SH/T 0404 5
Polyethylene wax has good cold resistance, heat resistance, chemical resistance and wear resistance, and has good compatibility with polyethylene, polypropylene, polyvinyl acetate, ethylene Propylene rubber and butyl rubber. It can improve the fluidity of polyethylene, polypropylene and ABS and the demoulding property of polymethylmethacrylate and polycarbonate. Polyethylene wax has stronger internal lubrication. Usages: 1.It is used as dispersant and lubricant for pigments or fillers such as thick color masterbatch, polypropylene masterbatch, additive masterbatch and filling masterbatch. 2.It is used as dispersant of ink, anti friction agent, viscosity regulator of thermosol and processing aid of aluminum foil composite paper. 3.It can be used as raw and auxiliary materials for textile softener, car wax and leather softener. Properties: Properties Unit XT619 XT316 XT330 XT25 XT1817 610A 620A Mettler drop point C 102 130 128 128 128 107 3 110 3 Density g/cc 0.99 0.99 0.99 0.99 0.99 0.93 0.93 Hardness d-mm 5
1. 24000L Palm Oil Biodiesel Used Cooking Oil use Flexitank Flexibag Suitable to Market is a very big market since it has plenty Oil Palm Trees, so there are plenty palm oil related products such as Palm Oil, Palm Acid Oil, Crude Palm Oil, Used Cooking Oil etc. in order to help palm oil suppliers export with lower package cost, ADA offer flexitank suitable to which with lower price and stable quality. 2. FAQ 1) What Shipping lines accept your flexitank We are member of COA, have passed American Railway Impact test, almost all shipping lines accept ADA brand flexitank, such as Maersk Lines, CMA-CGM, YML, Wanhai, KMTC, Hapag-Lloyd, APL.... 2) If there is leakage in abroad, how to solve it Except insurance, we have worldwide agent. 3) How many empty flexitank can be loaded in container One 20ft container can load 70 sets flexitank with accessories, one 40HQ can load 165 sets. 4) Whatâ??s your lead time 3-7 working days. 5) How about your payment term T/T, L/C at sight all accept. 6) Whats the loading port 3. Applications of flexitank: Foodstuffs Palm oil, Sunflower oil, Edible oil, Vegetable oil, Olive oil, Grape wine, Sorbitol, Soy sauce, Fruit juices, Food additives, Wine, Mineral, Glucose, Malt, Syrup and so on. Industrial Oils Base oil, Lubricant, Transformer oil, White oil, Tung-oil, Glycerin, Coconut butter, Hydraulic oil, Used cooking oil, Grease, Gear oil, Ricinus oil, High fatty acids and oleic acid etc. Non-hazardous liquid chemicals Plasticizers, Synthetic resins, Detergents, Disinfectors, Surface active agents, Polyhydric alcohols, Feed additives, Silicate, Salt Solution, Glycols, Emulsions, Polyether, Alkylating agent, Fertilizers, Natural& synthetic latex etc 4. Specification of ADA Flexitank Flexibag Capacity: 16000L to 26000L Material: Multilayers LDPE and one layer PP Layers: 3 layers PE and 1 layer PP/ 4 layers PE and 1 layer PP Valve: 3 Ball valve Type: Top Loading and Top Discharging(TLTD) Bottom Loading and Bottom Discharging(BLBD) Top Loading and Bottom Discharging(TLBD) Accessories: Steel bars, bulkhead, corrugated paper Air vent: Available Heating Pad: Steam Heating Pad and Electric Heating Pad Insurance: USD 5000 000 Global Quality Liability Insurance Certificates: COA, AAR, ISO9001, HALAL, KOSHER, FDA, EC Approval shipping lines: Maersk Line, CMA CGM, Yang Ming Line, Wanhai, KMTC, APL, HMM, Hapag-Lloyd... Temperature resistance:
Properties Unit Test Method Specifications Melting point C ASTM D938-2005 70-80 Viscosity mm2/s at 100 C ASTM D445-2009 8.5-10 Penetration 0.1mm/100g,5s at 25 C ASTM D1321-2010 20 Oil content ASTM D721-2006 1 Size,20mesh GB/T 6005-2008 90 Packing:25KG Valve bag/980KG Jumbo bag