Detailed product description Hjq-d paper tube recutter: cutting long tube into short ones. 1. I.D.: 40-150mm 2. Thickness: 3-15mm 3. Length: 90-1600mm Hjq-d paper tube recutter: Applicable technical parameters: 1. Inside diameter: 40-150mm 2. Parent tube length: 1600mm 3. Min.Recut length: 90mm 4. Wall thickness: 3-15mm 5. Knives: 11sets 6. Working air pressure: 0.6mpa 7. Operator: 1 person Main functions: 1. Manually uploading the paper tube and unloading the paper cores 2. Manually adjust the distance of knives. 3. Cut by 2 knives continuously almost in the same time. By container according to the machinery size. Dimensions:2500*700*1300mm Weight:500kg
Applicable technical parameters Base paper material Kraft paper, brown paper, bobbin paper The o.D of parent roll 1200mm(can made in order) Paper weight 200- 600gsm The o.D of rewind roll 1200mm The width of parent roll 1600mm(can made in order) Machinery speed 0-200m/ min The slitting width of rewind roll Min. 90mm Rewinding mold Centre rewinding Machine functions: 1. Equips lifting and clamping mechanical arms to lift, clamp and adjust jumbo paper roll, improving efficiency and reducing manual; 2. Motor-driven to lift knife carriage. Keep certain distance between knife carriage and rewind rolls, ensure precise slitting; 3. Adopt big knife carriage, reduce knife-jumping phenomenon largely, ensure quicker and stable slitting process; 4. Adopt automatic pneumatic unloading technical. Avoid low efficiency by human working, reduce working intensity; 5. Adopt single-shaft center rewinding mold, reduce compressive strength requirement, ensure better rewinding effect; 6. Adopt human-machine interface specialized operation system, more convenient operation; 7. Digital control tension control system, do not need manual adjusting tension, ensure good slitting rewind effect. Note: above are just parts standard technical parameters for reference; for confirm the most suitable mold, please tell us your practical parameters and requirements by email, then we will give you our advise and machine details, thanks. Mainfram:3100*2300*1500 2.5~3ton
Detailed product description Mb-c paper core end grinding machine: smooth tube ends. 1. Id: 76-152mm 2. Thickness: 5-8mm 3. Length: 57-160mm Mb-c paper core end grinding machine: Mb-c paper tube grinding machine, tube ends burnishing, trimming, polishing: for trimming paper tube ends to be smoothly, such as dty tubes, poy tubes. Applicable technical parameters Tube i.D. 76-152mm Working air pressure 0.6mpa Tube wall thickness 5-8mm Motor 1.5kw Tube length 57-160mm Operator 1 person Speed: 35-45pcs/ min (speed changed depends on tube size) Machine functions: 1. Cylinder drive molds to trimming and chamfering tube two ends 2. The molds are with heat-processing; 3. Machine frame and door are made of cold galvanizing plate; 4. The whole machine frame with affine deformation processing; 5. The four holes for grinding heads with high concentricity and straightness processing; Note: above are just parts standard technical parameters for reference; for confirm the most suitable mold, please tell us your practical parameters and requirements by email, then we will give you our advise and machine details, thanks. 1600*1150*1150mm 500kg By container according to the machinery size.
Economical 5 sheets home/office shredder Model no. S0510p Cutting style strip cut Sheet capacity 5 sheets Cut size (mm) 6.8 Continous shredding ¡ý20 times Throat width (mm) 4 x 220 Switch auto-start /off /reverse Media capacity n/a Speed (m/min) 3.8 Bin volume (l) 10l Noise level (db) < 72db Rated power /current 120w 10w/1.2a 0.1a Frequency 50-60hz Voltage 100-120v/220-240v Net weight (kg) 1.6 Machine size (mm) (l x w x h): 300 x 162 x 280 head size (mm) (l x w x h): 300 x 120 x 75.
Ecnomical 7 sheets cc/cd home/office shredder Model no. S0710d Cutting style strip cut Sheet capacity 7 sheets Cut size (mm) 6 Throat width (mm) 220 Media capacity cc(1) / cd(1) Speed (m/min) 3 Bin volume (l) 10 Noise level (db) < 72db Net weight (kg) 3 Unit size (mm) 300 x 162 x 289 Container loading quantity: 1, 476 / 2, 976pcs
7 sheets cc/cd home/office paper shredder Model no. S0710da Cutting style strip cut Sheet capacity 7 sheets Cut size (mm) 6 Throat width (mm) 4 x 220 Media capacity cc(1) / cd(1) Speed (m/min) < 72db Bin volume (l) 10 Noise level (db) < 70db Net weight 2.6 Unit size (mm) (l x w x h): 300 x 162 x 289 Container loading quantity 20' / 40' : 1, 476 / 2, 976pcs
7 sheets cross cut home/office paper shredder model No. C0714C Cutting Style cross cut Sheet Capacity 7 sheets Cut Size (mm) 4 X 39 Throat Width (mm) 4 X 220 Media Capacity CC Speed (m/min) 3.2 Bin Volume (L) 14 Noise Level (dB) < 72dB Net Weight 3 Machine Size (mm) (L x W x H): 308 x 180 x 360 Cutting Head Size (mm) (L x W x H): 308 x 165 x 98 Container Loading Quantity 20' / 40': 1362 / 2,748pcs
1. Cross cut shredder w/ credit card shredding function 2. Cut size: 4x28 mm(paper) 3. Entry width: 220 mm, 4. Shred capacity: 6 sheets (75g/©o), 1pcs( credit card) 5. Basket volume: 6 l 6. Noise level: around 60 db(a) 7: can shred paper, credit card, staple Unit size: (mm)198x273x355 Mastercarton size: (mm)506x335x428 N.W /unit: (kg)3.8 N.W/g.W per innercarton: (kg)3.8 / 4.5 N.W/g.W per mastercarton: (kg)7.2 / 9.45 Quantity per mastercarton: (pcs)2
Screen area: 0.5m2~2.0m2pulp consistency: below 3.0% capacity: 30~260t/dpulp inlet pressure: 0.1~0.25mpaapplication: pulp mill for waste paper or wood pulp to remove heave impurity and coarse screening the pulp. Email:kevin@hengbon.Com
Screen area: 0.4m2~6.0m2pulp consistency: 0.8~3.0%capacity: 18~600t/dpulp inlet pressure: 0.1~0.4mpa.Application: pulp mill (stock preparation).
Stainless steel cylinder mould Feature:1. Increase the area of filter water and improve capacity high. 2. Improve the quality of paper, such as formation, gram weight and the rate of tensile force with latitude. 3. Decrease consumption of felt and copper wire mesh. 4. Reinforce the wholeness and rotproofness of equipment, and expand the using life. 5. It has already produced crossing net, reeling net and inclined net.
ModelCbs-1100htm PaperWeightWidthLength 100-350g/©o550-1100mm400-600mm Finished bagBag bottom widthWidthLength 80-155mm180-330mm280-450mm Making speed40-80 pcs/min Total power3kw Voltage380v/220v Machine dimensions6001200120mm.
This cutter is applicable to all kinds of printing paper, kraft paper, glassine paper, books, leaflets, cards as well as all kinds of plastic, leather and metal foil, etc. Structural features: 1.Add-type air cushion platform, light control, dual digital display, lcd screen, the data resolution of 0.05mm, positioning accuracy of ¡à 0.15, 2. Concentration of fuel injection systems, optical line of the knife, mechanical rotation, quick tool change; ball screw and dual guide to push the paper runs a smooth light, low noise, accurate positioning, significantly improve the cutting accuracy and speed, and extend the life of the machine; built-in safety protection devices bed knife, cutting through the protection and automatic back-bit cd and other security devices; 3.Optional chrome and with air-cushion table, enhance operational efficiency; 4.Optional optical bench argon-plated, long-term use to prevent operator eye fatigue; 5.Centralized lubrication systems, security systems designed according to iec standards; 6.Model based a high-end computer program controlled, mid-range dual digital display, digital display and many were single (economic type) system, style diversification. Export wooden case
Dch0906 paper box die cut plotter sample flat bed cutting machine Blade, pen, creasing, wheel, servo motor Effective cutting area(mm)900*600 It is used in carton factory&color printing factory, it can cut and crease 2mm card paper and e corrugated paper Max speed 1000mm/s Smallest cutting diameter 1000mm/s Maximum cutting thickness 2mm card paper and e corrugated paper Control line and driver servo Vacuum 1.5kw Data form 220v10%50hz Data port pci port Data transmission speed 100mb/s Using dimension (mm) 1340*1070*1070 Input cushion area 32mb.
1.Power single phase 220 v, 50hz, 800w. 2.Function of machine: Specialized in rewinding the ink side in /out , wider ribbon roller to narrower ribbon rolls It is with edge cutting function, when rerolling the defective ribbon rolls, the edge of the ribbon can be cut off to make both ends of the ribbon rolls much tidy. And this can be also used for cut the ribbon from wide one to several narrower ones. 3.Unwinding width within 240mm, length within 1000m( dia.100mm) or it can be specially designed . 4.4rewinding width from 20-240mm.
GY-41 rigid box folding in machine is use to bend the extruding parts of the surface paper into the boxes.This machine has simple structure, convenient operation and fast speed features. It is used to side fold various sizes and shapes of paper boxes and the sizes and shapes can be adjusted 1 right angle platform for double side inner folding onto the paper box. 2 equipped with sensor to control the device. 3 platform can be adjusted according to the depth of the boxes. Model GY-41 Case size 420*420*150mm Speed 20-30 units/min Power 0.5kw, 220v Weight 240 kg Dimension 1000*700*1000.
Length: 1200mm Diameter: 50mm~150mm Paper Wall: 0.5mm~5mm Cutting Way: by air Power: 1.1KW Cutting Units: 8sets Size Of Disc Knife: 110x27x1.5mm. Weight: 0.8 ton Dimension: 2000x800x1200mm.
Tube Diameter: 30mm~300mm Tube Wall Thickness: 0.5mm~12mm Speed: 3-15m/min Cutting Length: Max 4000mm, flowing cutting controlled by photoelectricity switch. Power: Main Machine 5.5kw; Cutting: 0.75kw Control way: Frequency conversion; Multipoints in-phase control Transmission Way: Screw umbrella gear wheel Size of wheel: 320mm Cutting Way: Automatic cutting Belt way: Both right side and wrong side are ok Belt: circle nylon ,1pc Paper shaft: 1pc (with plating chrome) 3"or by order Glue System: ship, both sides of paper layer Paper-putting Frame: whole jointing steel, with little crane Bottom paper and face paper has own paper putting frame Sending paper from both sides (15layers),1 set glue tank. With heating bonding device for inner aluminum foils. Wegiht:3.2t Dimension: main machine 3200x2000x1800mm.
Tube Diameter:20mm~300mm Tube Wall Thickness: 0.5mm~20mm Speed: 3-15m/min Cutting Length: Max 4000mm,flowing cutting controlled by photoelectricity switch Power: Main Machine 15kw; Cutting: 0.75kw Control way: Frequency conversion. Multi-points in-phase control Transmission Way: Screw umbrella gear wheel Size of wheel:320mm Cutting Way: Automatic cutting Belt way: Both right side and wrong side are ok Belt: circle nylon ,1pc Paper shaft:1pc (with plating chrome) 76mm or by the buyers order Glue System: ship, both sides of paper layer Paper-putting Frame: whole jointing steel,with little crane Bottom paper and face paper has own paper putting frame Sending paper from both sides,1 set glue tank. Weight: 3.2t Dimension: main machine 3200x2000x1800mm.
1, Paper roll width : 1400mm 2, Sheet accuracy : 0.3 mm 3, Optional equip with Germany Synchronization controller, accuracy : 0.2mm 4, Max. cutting speed : 300 m/min 5, Max. rotation speed : 400 r/min 6, Sheeting length : 300 ~ 1550 mm 7, Sheeting thickness : 180 ~ 400 gsm. Sheet pilling height : 1400mm Weight : 12ton.
