Adopt special acrylic resins as the main raw material and have excellent adhesion and good whether resistance. Scientific mixture ratio makes the paint with high solid content which ensures the paint can be stock for a long time without deposition. The marking coat is thick and can be sprayed with reflective materials for a long-term reflective ability. The coating dries fast and the drying time are about 7 to 10 minutes under normal temperature. 25kg/bag.
Themoplastic road marking paint 25kg/bag
Property: low adhesive, high softening point, good dispersive capacities and widely used in plastic industry. Application: 1. Used widely in the course of extruding, calendaring, injecting, blowing molding of pe, pp, and pvc and acts as the slip agent and lubricant. 2. As a lubricant of insulating materials in cable, it can largely improve the productí»s surface quality. 3. Good characteristics of light and chemical resistance performance applied as flatting agent in processing of powder paint and printing ink. 4. As lubricating and softening agent for natural or compound fiber. 5. Dissolving easily with polythylene, pvc, polypropylene and so on, as a lubricant it can largely improve the processing efficiency and overcome the felting between the products. 6. Applied in processing of shoe polish, candle, leather and sticking agent etc. Index: Appearance white granule or powder Dosage (%) 0.5-5 Softening point (íµ) 100-110 Density (g/cm3) 0.90-0.92 Viscosity(cps)150íµ 50-100 Hardness(dmm) 3~7 Molecular weight 1500-2500 Packed in 25kg knitted bag with inner bag and no danger.
Strong dirt resistance; Easy application Rapid drying speed, 12000 times for scrub resistance. Method * surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. * mix well before painting, plus proper clean water for diluting and mix well. * stop application when temperature is below 8 celsius * proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). * application tools: brush, roller, and spray *consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index This product conforms to china national mandatory standard:gb/t9756-2001 *appearance: white viscous liquid *solvent type: water-base *color: white * gloss: matt *to touch: 0.5-1 hours *viscosity: 100 ku *solid content:53% *voc: ín47 g/l 1l drum; 5l drum; 18l drum
Waterborne assist non-odour. Super dirt resistance, Water resistance and breathe freely, Non-yellowing, Outstanding hiding and adhesion, 50000 times for scrub resistance. Method Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. Mix well before painting, plus proper clean water for diluting and mix well. Stop application when temperature is below 8 celsius Proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). Application tools: brush, roller, and spray Consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index: This product conforms to china national mandatory standard:gb/t9756-2001 Appearance: white viscous liquid Solvent type: water-base Color: white Gloss: matt To touch: 0.5-1 hours Viscosity:100 ku Solid content:57% Voc: ín 47 g/l 1l drum; 5l drum; 18l drum
Full matt paint film, Excellent mildew resistance, algae resistance and health. Strong adherence performance Water resistance and breathe freely, Lasting light color, strong tarnish resistance, Outstanding hiding and coverage, smooth feeling, Easy application and rapid drying speed, 80000 times for scrub resistance. Method * surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. * mix well before painting, plus proper clean water for diluting and mix well. * stop application when temperature is below 8 celsius * proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). * application tools: brush, roller, and spray *consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index: This product conforms to china national mandatory standard:gb/t9756-2001 *appearance: white viscous liquid *solvent type: water-base *color: white * gloss: matt *to touch: 0.5-1 hours *viscosity:100 ku *solid content:59% *voc: ín47 g/l 1l drum; 5l drum; 18l drum
Series exterior Lifespan Feature Exterior paint series 1 2 years 1.Paint film smooth and solid 2.Good weather resistance 3.Water-resistent, alkali-resistent, scrub-resistenrt 4.Good coverage ability and economically Exterior paint series 3 3 years 1. Firm tensile tenacious, glossy 2. Anti-sunshine and anti watering 3. Strong adhesion 4. Strong coverage ability, anti-site, Exterior paint series 6 5 years 1. High glossy 2. Outstanding dirt resistance, alkali resistance, 3. Outstanding water resistance, alkali resistance, 4. Outstanding coverage ability and leveling property and easy application Exterior paint series 9 More than 8 years 1. Excellent light glossy 2. Excellent anti-dirt resistance 3. Strong weather resistance 4. Strong coverage ability and good levelling property 1l drum; 5l drum; 18l drum
1. According to the customers requirement, we can provide the product with content of tetrahydro resin acid between 30-60%; and we can also provide special products with low softening point. 2.Uses: used in adhesives, coatings, inks, solder material and solder flux, cosmetics, food industry, etc. Drum: net weight 225kgs each drum
This product is fast-drying and forming a metallic mirror with strong decoration, additionally it can resist the ultra violet.
Paint paddle Stir stick Wooden stake 12" 14" 21"
Luminous road marking paint.
Specification Appearance: light blue clear liquid Solvent type: methanol Crystal form:anatase Description 1.Air-cleaning;2. Self-cleaning;3. Anti-bacteria;4. Water-cleaning: purify the water pollution and the organic injurant in the water; 5.Increasing the concentration of minus oxygen hydronium: nanometered titanium dioxide can produce the minus oxygen hydronium under the sunshine as if the effect is produced by thunder strom to make the air much fresher. Application Use for textiles, wood board and other hydrophilic material, or use for surface treatment of base material can soakage with water; also can be added into painting and coating. Packing Plastic barrel in 5kg/20kg. Or upto customer's requirement. Plastic barrel in 5kg/20kg. Or upto customer's requirement.
Specifications and properties: Colors available: black, silver dots on black background, etc; Solid content range%: (25-30)/(40-50) )fa 2 (base-coat/top-coat) Cure temperature range: (150-180) /380-400 (base coat/top coat) Cure time range: (8-10)minutes/(10-15)minutes(base-coat/top-coat) Theoretical coverage: ( 7-8)m2/kg (base-coat) (8-9)m2/kg (top-coat) 25¬8~30¬8 Certificates: fda / lmbg / rohs / sgs. Model no.: Sl-w/m Unit price/payment: T/t, l/c
Solvent-based coating Specifications and Properties: Colors Available: Black, gray, metallic color and silver dots, etc; Solid Content %: 28-30)f+ 0.2 Cure Temperature Range (380-400) Cure time: 10minutes Theoretical Coverage: 6.5f+ 0.2m2/KG 12»~15» Certificates: FDA / LMBG / RoHS / SGS Coating flux uses a combination of PTFE resin and super-heat-resistant resin. With excellent adhesion strength, good hiding power, age resistance and weather resistance when used on the surface of aluminum, stainless steel, and ordinary steel. Model NO.: 9906 Unit Price/Payment: T/T, L/C.
Sea-ion 316 is specially designed for recycling disk. It can remove the uv glue, metal reflecting layer, dyestuff and printing ink quickly and thoroughly. The product is non-toxic and inodorous. Its quality is stable. Cooperate with the sea-ion process technology; it is a necessary product for waste disk recovery processing enterprises. No damage to substrate material, high recovery rate, after cleaning, the pc is transparent & bright, high added value. No need to use concentrated sulfuric acid, complete process need only one step, simple and safe. Cleaning time is short, save energy, increase production efficiency. Our products: 1. Sea-ion 301-woven bag printing ink normal temperature detergent 2. Sea-ion 302 po/ps acidophilus milk bottle printing ink normal temperature detergent 3. Pe/pp bottle printing ink detergent 4. Sea-ion 311 bottle flake degumming agent 5. Sea-ion 312 pc car lampshade film and paint detergent 6. Sea-ion 313-pc mobile phone frame depainting agent 7. Sea-ion 315 pc nursing bottle ink detergent 8. Sea-ion 316 pc disk paint and film detergent 9. Sea-ion 317 pc eyeglass color and film detergent 10. Sea-ion 318 pc glass frame depainting agent 25kg/barrel
Chemical characteristic Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior and exterior lubricant, it can be used as a substitute for liquid paraffin, natural paraffin etc. Application 1. The lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of pe, pp and other plastic. 2. The dispersant for masterbatches, pigment, carbon black, additive for parent material, filling parent material and other pigments. 3. For hot melt road marking material. 4. The additive for shoeshine, floor wax, car wax, polishing wax, chinaware, pill wax, paint, cable, carbon paper, wax paper, textile softening agent etc. 5. The additive for rubber process and car anti-rust agent etc. Index Appearance white bread or powder Dosage (%) 1-5% Softening point (íµ) 105-115 Density (g/cm3 ) 0.90-0.93 Packed in 25kg knitted plastic bag with inner plastic bag and no danger, and keep in cool and dry place.
Waterproofing coating
Spray Painting guns with integrated cascade, excellent atomization, high transfer efficiency and ultimate safety standard. There are a few models available, all of which function with stable performance, achieving excellent surface finishing result and coping with the difficulties to most competitive suppliers.
Engine foamy cleaner is a powerful foam detergent applied for cleaning the parts surface that hard to clean by general way. It can form foam on upright surface and quickly remove the dirt, oil stain and other deposit, protect parts but not damage the rubber, plastics and paint. It is safe, used easily and incombustible. Specification:400mlíß12 Packing: 280íß200íß200mm carton box
Aerosol paint Feature: 1.100% acrylic resin 2. Interior/exterior 3. Fast dry Specification:400mlíß12 Packing: 280íß200íß200mm carton box
