As a manufacturer of alumina ceramic plates, we manufacture and sell multi-size alumina ceramic plate like: alumina panels, alumina disc, alumina board, etc.and also offer custom or machining alumina plate for our customer. Our alumina plate made by Al2O3 alumina ceramics which alumina purity can be option from 95% to 99.99% al2o3. Alumina plates with different alumina al2o3 content have different performance characteristics, so different types of alumina plates are used in different industries. Alumina ceramic is a kind of alumina (Al2O3) as the main ceramic material.Alumina ceramics have good conductivity, mechanical strength and high temperature resistance. For the alumina plate sizes we produce them according to customer requirements.high al2o3 purity, high precision,factory price. alumina ceramic plate High purity alumina ceramics 99.99% Alumina ceramic; 99.9% Alumina ceramic, Ordinary alumina ceramics 99.7% Alumina ceramic,99.5% Alumina ceramic,99% Alumina ceramic,97% Alumina ceramic,96% Alumina ceramic,95% Alumina ceramic Alumina plate Applications Al2O3 Alumina ceramic plates are used in the following applications:
Alumina ceramic tube is made of 95% high purity alumina ceramic material.According to customer requirements, we can provide different high-purity alumina ceramic tubes, such as: Alumina ceramic(Al2O3):95%;96%;97%;98%;99%;99.5%:99.7%;99.9%...etc. High heat and temperature resistant for alumina ceramic tubes The High heat temperature alumina tube have a excellent high heat temperature resistant ability. High heat temperature alumina tube can be used under 1800â?? high temperature environment.Coefficient of thermal expansion up to 9* 10â?§6 from 20�°C- 1000�°C. up to 2050�°C Melting point. Corrosion resistant for alumina tubes Corrosion alumina tube material has excellent chemical stability under high temperature, it is not easy to oxidize, and Corrosion alumina tube has good corrosion resistance to acid, alkali and salt.
High precision ceramic shaft rods we produce have good heat conductivity , high thermal conductivity. we offer custom ceramic shaft rod with multi sizes and shape due to the ceramic shaft have a wide range use for industry which have own sizes demands and diameters. Advantages of ceramic shaft rod: - High thermal conductivity - Low coefficient of expansion - High strength - High temperature resistance - Chemical resistance - High resistivity - Small dielectric constant - No toxicity Note: 1.Surface roughness can be reached 0.1�¼m after polished. 2.Size tolerance can be controlled in +-0.10mm with laser machined. 3.Special specifications can be supplied upon requests. Ceramic materials �· 95%--99.99% Alumina (Al2O3) �· Silicon Carbide �· Silicon Nitride TTZ: Magnesia partially stabilized Zirconia (ZrO2) YTZP: Yttria partially stabilized Zirconia (ZrO2) ZDY: Yttria fully stabilized Zirconia (ZrO2)
Activated alumina produced by PX Global is a high-surface-area, highly porous form of aluminum oxide. It works in industrials to remove impurities from gaseous or liquids, applied as a desiccant that absorbs moisture from the air; as a Fluoride Adsorbent remove fluoride from drinking water; also can be worked as a Claus catalyst for sulfur recovery in the oil and gas industry.
Inert alumina ceramic ball is worked as a support material in gas processing or petroleum or chemical industries, it with the characteristic of high density, high strength, low abrasion. We can provide different sizes from 3mm to 75mm and different alumina content according to your processing requirements, and the customized product is acceptable.
Parameters Appearance Red brown color Size 1mm~20mm PH 8.5~9.5 Specific Area cm2/g >0.5*10^4 Specific Density g/cm3 1.3~1.55 Bulk Density g/cm3 0.74~0.78 Peak� width� at� half� height� (Hz) 15~30 Inner Porosity Rate% 20% Bulk Porosity Rate� (%) 39% Clay Percentage â?¤0.13% 60min Maifan Stone Ball Dissolved mg/L 40 60min E-coli Absorption% 0.8376 Packing 20kgs per carton,1000kgs per pallet Function: Water Activation Mineralization water Restore PH balance in your body
Detail parameters Shaft components Radial dimensions can be up to 0.0015mm Roundness 0.001mm Concentricity 0.0025mm Roughness 0.01 Minimum aperture diameter of hole parts 0.3mmï¼?depth can up to 3mm 1 mm diameter can be radial 0.002mm Roughness 0.02-0.04 Plane machining tolerance can be reach to 0.002mm and aircraft horizontal measurement tolerance 0.0015mm Ceramic processing thread The minimum internal thread can be M2
MaterialCeramic(ZRO2,SI3N4) 1.Size: 0.8mm-10mm 2.Grades: G5-G20 3.Applications: Widely used in different types of ceramic,enamel,glass,chemical industry and thick hard material finishing and deep processing of the factory.It is grinding medium of the fine crushing equipment such as ball mill,vibration mill,Cylindrical grinding machine.The crushing grinding efficiency and wear resistance significantly better than ordinary or natural pebble stone ball.
Aluminum Nitrides (AlN) combine high thermal conductivity with strong electrical resistance, making AlN an excellent solution for many electronic applications. Advantages High thermal conductivity.Thermal stability up to at least 1800°C Excellent insulation High hardness High compressive strength High accuracy Good wear-resistance Well resistant to high temperature Non-absorbent Favorable mechanical characteristics extending into the high-temperature range. Low thermal expansion and resistance to thermal shock. Special optical and acoustic characteristics. Unusually high thermal conductivity combined with good electrical insulation characteristics. Exceptional stability when exposed to many molten salts. Offer different specification and dimensions according to your request High thermal conductivity AlN ceramic Properties Flexural strength is 300 ± 5MPa Coefficient of thermal expansion is 5.6x10-6K-1 (20-1000°C) Thermal conductivity is 100-200 Wm-1K-1 Insulation resistance is >1012Ωcm (20°C) Supply different purity products such as 95%Al2O3, 98%Al2O3, 99%Al2O3, 99.5%Al2O3 Ceramic materials. Alumina ceramic products, including tubes, rods, crucibles, plates, and other parts by your drawing. Silicon carbide ceramic products, including beams, plates, tubes, crucibles etc. Boron nitride ceramic products, including plates, the crucible, and other parts as you need. Application 1. Aluminum nitride powder with high purity, small size, high activity, is the main raw material for the manufacture of high thermal conductivity aluminum nitride ceramic substrate. 2. AlN ceramic substrate, high thermal conductivity, low expansion coefficient, high strength, high-temperature resistance, chemical corrosion resistance, high resistivity, dielectric loss is small, think of the large scale integrated circuit substrate and packaging materials. 3. More than the traditional aluminum nitride alumina, high hardness, abrasion-resistant ceramic materials is new, but because of its high cost, only for the serious wear of the parts. 4. High melt erosion and thermal shock resistance of AIN ceramics by heat, can be made of GaAs crystal crucible, Al evaporation dish, magnetic fluid generating device and the high-temperature corrosion of turbine components, using the optical properties for the infrared window. Aluminum nitride thin film can be made of the high-frequency piezoelectric element, ultra large scale integrated circuit substrate. 5.Aluminum nitride, heat resistance, erosion resistance of the molten metal, but the acid stability in alkaline solution Easy to be eroded.AIN new surface is exposed to moist air will react very thin oxide film. Using this characteristic can be used like aluminum, copper, silver, lead and other chemical properties of metal crucible for metal melting and casting mould of.AIN ceramics is better, can replace toxic beryllium oxide ceramics are widely used in the electric industry.
PF102,PF102,PF111,PF112,PF121,PF122,PF131,PF151,PF152
75% alumina balls density 3.2
Product Description Condition New Color Gray Place of Origin Yantai,China(Mainland) Working Temperature 1000-1750 Dimension(L*W*H) Customized Power Source Electric Power(W) All Depends Model Number TC1700/TC1800/MR1800/TC1850/TC1900 Volume Density 5.8~6.2g/CM3 Voltage All Depends Type Air Heater Shape: U,W,L and customized Brand Name YT Torch Weight All Depends 1. High temperature MoSi2 heating element for various electric furnaces. 2. Max. working temperature 1850 , safety running for operating temp. 1750 3. Protective layer of quartz glass is compact and good adhesion with the substrate 4. Excellent high temperature strength and density
SCR Catalytic Converter Muffler is mainly used in diesel engine exhaust system . SCR means selective catalytic reduction. Its principle is that NO and NO2 reduced to N2 under reducing agent NH3 and 290-400 Celsius.  Almost no NH3 oxidation reaction occur. Our patented SCR catalytic muffler successfully assembled Beijing Public Transport System in 2008 . We also supply Catalytic Converter, Catalytic muffler, Motorcycle catalytic converter, DOC Catalyst, Diesel Particulate Filters, DPF, SCR catalyst ,Ceramic honeycomb monolith , Metal honeycomb carrier, ect. Our  management system has been certified the ISO9001 and TS16949 by SGS company.  SCR system main include:  urea solution , transporting devices, metering devices, injection devices, catalytic converters, exhaust temperature sensor and so on . And our SCR catalytic converter Muffler is the core of SCR system .  Features: Emission standard: Euro III , Euro IV ,Euro V   conversion rate : 98.5% Applicable models : for diesel vehicles Ignition temperature : 50 ºC   heat resistance : 800ºC Basic conversion when using urea : 4NO + 2 (NH2) 2CO + O2 â??4N2 + 4H2O + 2CO2 Reaction temperature : 90%                   ETC cycle NOx reduction efficiency of > 80% The average concentrations of NH3 overflow
Alumina Ceramic sheet plays a very important role in Chinese technical ceramics industry. we focus on providing a better solution for our customers to reduce purchasing cost. Our products in following materials: 1-75% Al2O3 2-85% Al2O3 3-95% Al2O3 4-99% Al2O3 5-Silicon Nitride 6-Silicon Carbide 7-Steatite Ceramic 8-Zirconia (Zirconium Oxide)
Refractory bio-soluble fiber paper super manufacturer: refractory bio-soluble fiber paper, excellent flexible and easy to wrap, shape and cut. Model: spe -stz. Characteristics: Super bio-soluble fiber paper is made from super bio-soluble fiber bulk (biofiber alt) with mixing of inorganic bond, little organic glue which is selected scientifically and controlled strictly.The bio-soluble fiber paper is produced by vacuum forming technics. Our modern production technics works under the full automatic control. According to the different technics, super bio-soluble fiber paper include organic paper and inorganic paper. The bio-soluble fiber paper is the idea materials for producing high-temperature gasket, seal and heat insulation. In the process of heating application, the organic binder will be volatilized at the temperature 250-350?, after volatilization, the paper is pure white. Our bio-soluble fiber paper satisfies the europe directive 97/69/ec. The classification temperature(?): 1050, 1260. Characteristics: * excellent flexbility, smooth furface and easy to wrap, shape and cut. * excellent thermal and chemical stability. * low heat storage, low thermal conductivity, low shrinkage, excellent insulation effect. Applications: * high temperature gaskets and seals. * expansion joints. * asbestos paper replacement. * automotive heat shields and silencer insulation. * back-up lining for molten metal transfer system.
Ceramic fiber paper production line can produce 1260 and 1430 grade ceramic fiber paper, with density 180kg/m3 to 200kg/m3, thickness 1mm to 6mm. The raw material is blown ceramic fiber bulk, which is easier to cut, distribute and to distribute glue evenly.The ceramic fiber bulk need to chop, cleanout, filtrate shot, to reach the required length of paper production technics, so that the fibers can be districuted into the slurry pool evenly. In the process of mixing fiber slurry, it needs workers to fill the fibers, matched glue, additives and mix them evenly;then to remove the shot by the water scummer many times, and transport the slurry to the storage slurry pot, for the use of forming machine. The pump deliver the matched slurry to the forming pool, the fiber slurry are absorbed onto the forming machine under the vacuum negative pressure of the forming machine, to form wet embryo, and do the vacuum dehydration at the same time; after dehydration, the forming paper embryo are delivered to the calender by net cloth;after compression and flat, then the paper embryo are delivered to the drying furnace for drying. The drying furnace use the composite hot wind drying device, to dry and shape the product;after dry and shape, the products are delivered to the cutting device with the measuing length instrument, for cutting and rolling; at last, for quality control and packing, the finished products are sent to the warehouse for dispatching.
* price:$4750(second hand) $10800(new one) * Installed ceramic toners C,K,M,Y total 1kg * Biggest covering wide A3+ (297x940mm,can also add to 30.5cm*1.2m) * Printing precision 1200x1200dpi * Printing speed 35pages/minute 145 square metres /hour * 160% coverage can print 5500pcs 5” images
Product description Zirconia ceramic thermocouple-protection tubes are considered to have better mechanical strength and better chemical resistance, also have excellent abrasion resistance. Zirconia ceramic thermocouple-protection tubes are considered to be gas tight so they make excellent primary protection tubes. Product specification/models Standard dimension(mm) Od-id-length:12.7-8.7-1230&930/9.5-6.4-770&660/6.5-4.5-915&545/18-12-100&200 The tubes of the above sizes , we have available stocks. We can also custom cut shorter lengths to your specifications. Other sizes available on request. Application Zirconia ceramic thermocouple-protection tubes can be for primary and secondary protection tubes on noble metal (platinum based) thermocouples. Other information In addition, timely delivery, stocks and product information are available. Should you have any questions, pls do not hesitate to contact me. Free samples will be sent for your evaluation! Note:if we have available stocks for your sizes, free samples can be sent to you but you bear the freight. If your sample is custom-made, you should pay for both the sample fee and freight.
Product description Alumina ceramic tubes are widely used in various industrial furnace for supporting, threading and insulation etc.They are recommended for use in mass spectrometers and other vacuum sustems as feed through lines, thermocouple insulators, and in other applications requiring electrical and thermal insulators. Product feature Excellent thermalstability Insulation Temperature resistance Etc.Properties Product specification/models Standard dimension Ceramic tubes can be in single hole, double, three and four holes. The size of the ceramic tube's outer diameter range from 0.8mm-14mm. The ceramic tubes can be supplied in longer lengths(up to 2500 mm long).We can also custom cut shorter lengths to your specifications. The ceramic tubes can be triangular tube, square tube, other types, etc. Application Alumina ceramic tubes are used in b-type, s-type and tungsten-rhenium thermocouple sleeves. Other information In addition, timely delivery, stocks and product information are available. Should you have any questions, pls do not hesitate to contact me. Free samples will be sent for your evaluation! Note:if we have available stocks for your sizes, free samples can be sent to you but you bear the freight. If your sample is custom-made, you should pay for both the sample fee and freight.
Product feature Excellent insulation High pressure resistance High temperature resistance Temperature stability Corrosion resistance Chemical resistance Wear resistance Etc.Properties. Product specification/models Regular dimension: Od-length/mm:20-2800/25-2800/27-3100/30-3300/33.7-3500/35-3600/40-3600/42-3600/45-4200/48-4200/50-4400/52-4500/55-4700/60-4800/65-4800 The tubes of the above sizes, we have available stocks.We can also custom cut shorter lengths to your specifications.Other sizes available on request. Application Mainly used in electronic enterprises and furnace manufacturing enterprises. Other information In addition, timely delivery, stocks and product information are available. Should you have any questions, pls do not hesitate to contact me. Free samples will be sent for your evaluation! Note:if we have available stocks for your sizes, free samples can be sent to you but you bear the freight. If your sample is custom-made, you should pay for both the sample fee and freight.
