(A)The galvanized steel strands for optical fiber cables are made of high-quality carbon steel wire rods through a series of processes such as heat treatment, peeling, water washing, pickling, water washing, solvent treatment, drying, hot-dip galvanizing, post-treatment, and wire drawing into the steel wires, and then twisted into stranded products.
The galvanized steel strand for optical cable is one of the basic components used in the Fig-8 self-support optical fiber cables for communication. As the suspension wire component in the optical cable, it can bear the weight of the optical cable and the external load in the optical cable, and can protect the optical fiber be free from bending and stretching, ensuring the normal communication of the optical fiber, and stabilizing the quality of the optical cable.
(B)The galvanized steel strands for optical fiber cables have the following characteristics:
1) The surface of galvanized steel wires in the galvanized steel strands have no defects such as overlap marks, scratches, breaks, flattening and hard bends;
2) The zinc layer is uniform, continuous, bright and does not fall off;
3) The surface of the galvanized steel strands is smooth, clean, free of oil, pollution, water and other impurities;
4) The appearance is round with stable size, high tensile strength and large elastic modulus.
2.Application
It is suitable for communication suspension wire unit of Fig-8 self-support optical fiber cables for outdoor telecommunications.
GYTS armored fiber optic cable
   1. Description
· Duct optical fiber cable, optical fiber cable, fiber optic cable, loose tube fiber optic cable
· GYTS Outdoor Aerial Optical Fiber Cable with Maximum Fiber Number of 288 CoresÂ
·Strength Member: Steel wireÂ
·Fiber: can choose SM 9/125 or MM: 62.5/125 ,50/125, OM1,OM2,OM3,OM4
 2. Characteristics
1.Low dispersion and attenuation
2.Good mechanical and temperature performance
3.High strength loose tube that is hydrolysis resistance
4.Special tube filling compound ensure a critical protection of fiber
5.With small cable diameter, light cable weight
6.Crush resistance and flexibility
7. The following measures are taken to ensure the cable watertight:
           * Loose tube filling compound
           * 100% cable core filling
KVM Fiber Extender
ORIVISION's KVM Fiber Optic Extenders transmit AV and RS-232 control signals or USB over long distances over fiber optic cables. They are designed for reliability and superior high-resolution image performance, enabling transmission of HDMI/DVI and standard definition video.
The FiberHTT HSFP3128-LR SFP28 25G LR Duplex 1310nm 10km transceiver is designed to transmit and receive optical data over single mode optical fiber for link length up to 10km.
The module optical connection is duplex LC and shall be compatible with SFP+ 28Gbps and backward compatible with legacy 10G SFP+ pluggable. The SFP28 LR module is a dual directional device with a transmitter and receiver plus a control management interface (2-wire interface) in the same physical package. 2-wire interface is used for serial ID, digital diagnostics and module control function.
The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. The SFP28 LR module electrical interface is compliant to OFI CEI-VSR-28G-VSR. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.
Optic Fiber Media Converter 10/100BaseT/TX to 100BaseFX external power supply
Features
Supports auto MDI/MDIX crossover
1K MAC address can be storage, and automatic updated
Supports 10/100M, full/half duplex auto- negotiation
Comply with IEEE 802.1Q VLAN TAG, Spanning Tree standard
More than 50,000 hours MTBF
Supports over-sized packets up to 1600Bytes
Full duplex-flow control, Half duplex-back pressure
Link fault pass through function
Full-positioned LEDs to indicate power and network status
Same card on rack mounted and desktop
FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark
Throughput @ 100Base: 148,800 pps (64-byte packets)
Multimode or Singlemode; single fiber or dual fiber optional
Transmission distance is from 2KM up to 120KM
Network broadcast storm protection function
High quality optical modules and chips with working stability
Specification
Standard
IEEE802.3 (10BASE-T)
IEEE802.3u 100BASE-TX/FX (Fast-Ethernet)
IEEE802.3x (Flow Control)
IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree
Fiber Connector
SC standard, ST/FC/LCoptional
10/100BASE-T
STP or UTP Category 5/5e/6 cable (Max. 100m)
100BASE-FX
50/125um, 62.5/125um multimode fiber cable (2Km)
9/125um singlemode fiber cable (20/40/60/80/100/120Km)
Conversion Mode / Delay Time
Store-and-Forward < 10us, straight-through<0.9us
Flow control
Full duplex-flow control, Half duplex-back pressure
MTBF
50,000 hours
RJ-45 Port
Auto-MDI/MDIX
Name: copper conductor xlpe insulated steel wire armored power cablestandard: iec60502, bs, din, astm, gb12706-2008 standard.Voltage: up to 35kvconductor: copper or aluminum conductorinsulation: pvc or xlpecross section: based on client's requirementapplication: medium voltage power cable is used in fixed laying to distribute the electricity in the ac rated voltage 35kv and under 35kv transmission line.
Standard export wooden , wooden steel drums or according to the customers'requirements
* 4-pair unshielded twisted pair cable
* 24awg solid bare copper conductor
* meets or exceeds cat5e specifications
* rated to 350mhz to provide additional performance and bandwidth over and above the basic requirements of cat5e 100mhz standards
* high-density polyethylene insulation, pvc jacket
* foot-marked cable packaged in ez pull box
* ideal for 10base-t(ieee 802.3), 100base-tx(ieee 802.3u), 1000base-tx, 100 vg-anylan(ieee 802.12), token ring(ieee 802.5), tp-pmd(ansi x3t9.5), 350 mbps cddi, atm 155, voice and multimedia
* cm rated for use in walls and conduit in ceiling
* verfied compliant with eia/tia standards by ul and etl
* ul/csa listed
Other features:
1. 24awg solid copper core ( or ccs, cca, ccam, ccag)
2. 0.38mm, 0.44mm, 0.48mm, 0.5mm
2. Fr pvc or lszh, rosh jacket ,
3. Utp (unshielded twisted pair)
4. Strictly comply with the international standard. Meets or exceeds cat5 specifications.
5. The length and color of the jacket can be assigned by the customer.
6. Ideal for 10base-t(ieee 802.3), 100base-tx(ieee 802.3u), 100 vg-anylan(ieee 802.12), token ring(ieee 802.5), tp-pmd(ansi x3t9.5), 350 mbps cddi, atm 155 and voic
7. Package : 305m/box , or according to the buyer's need.
8. OEM service offered.
Features:
Low insertion loss and high return loss
Small bending radius, excellent mechanical and environmental performance
Good exchangeability
Good durability
High temperature stability
Available :
Simplex/duplex patch cord available
Fan-out available
Pigtail available
Various boot(cable) sizes available
Fc/lc/sc/st/mtrj/mpo connectors available
Lszh and pvc cable
Applications:
Telecommunication
Computer networks
Catv networks
Active device termination.
1pc/plastic bag, bag size:18mmx22mm
Small carton:37x28x28cm
Big carton:59x39x30.5cm
386 Optical Fiber Cables Suppliers
Short on time? Let Optical Fiber Cables sellers contact you.
