Detailed Product Description of Mud Gas Separator 1. Control delivery of gas to the flare line 2. Control of retention time of gas-cut mud in the vessel 3...Promotes safe drilling environment 4...Efficient removal of free gas 5...Control delivery of gas to the flare line Features Large effective vessel capacity Removal of dangerous H2S and other poisonous gas Baffle plates in vessel Customizable specification Backpressure manifold with flare ignition line Effective U-tube or mud seal configuration Skid-mounted design with lay down legs Optional elevating type
Descriptions of AJ Solids Control Shale shaker/ Sludge Treatment Shaker Shale shaker is the 1st phase solids control equipment in the oilfield drilling fluid. It is mainly used to treat the more than 74um drilling fluid from the well. Each drilling site must have this. It can be used as one set working, and also can be used two sets working together and also three sets working. Shale shaker performance decides subsequent equipment process effect and usable life. It's the absolutely necessary equipment in solids control service. Features 1.The vibrating motors are all Itally Oli and explosion proof type. 2.The shaker screens can be flat plate, soft hook and hydraulic pressure. 3.Painting: three payer, the total thickness can reach 200 um. 4.Linear motion-Rapid discharges 5.Mechanical deck angle adjustment-Easy and convenient Benefits 1.Compact footprint and light 2.User-friendly 3.Easy to installation 4.Low cost on operation and maintenance. 5.Low noise 6.Decrease drilling cost Remarks: The Shale shaker screens can be pre-tensioned and also can be frame type.
1. Small footprint, save much space 2. More convenient, save cost and tank space 3. Without feed pump Features 1). Compact design 2). High performance/full vacuum 3). Vacuum pump mounted together with degasser vessel 4). Internal impellers 5). Vertically-mounted units 6). Without feed pump Technique parameters Model ZCQ240 ZCQ270 ZCQ300 ZCQ360 Vessel diameter 700mm 800mm 900mm 1000mm Treating capacity = 240 m3/h = 270 m3/h = 300 m3/h = 360 m3/h Vacuum pressure -0.030~-0.045MPa -0.030~-0.050MPa -0.030~-0.055MPa -0.040~-0.065MPa Ratio 1.68 1.68 1.68 1.72 Efficiency = 95% = 95% = 95% = 95% Main motor 15KW 22KW 30KW 37KW Vacuum pump motor 2.2KW 3KW 4KW 5.5KW Impeller speed 860RPM 870RPM 876RPM 880RPM Dimension 1750× 860× 1500mm 2000× 1000× 1670mm 2250× 1330× 1650mm 2400× 1500× 1850mm Weight 1100kg 1350kg 1650kg 1800kg
YPD Flare igniter is one equipment to burn H2S gas separated out of drilling fluid. It is connected with poor boy degasser by vent line and flare line. When burn the gas out the gas will become common subject without poison or other harmful issues. This provide safe drilling condition and good environment. So we call flame igniter is environment friendly equipment. OGEM will offer you details on igniter and mud/gas separator relationship. Features 1.High quality standard steel material 2.Compact design and light weight 3.Connected with H2S poor boy degasser by flare line 4.Burn H2S and other poisonous gas 5.High ignition frequency Benefits 1.Strong and durable 2.Save space, Easy to handle and transfer 3.No other additional space for harmful gas 4.Protect drilling site and keep work safe 5.Burn H2S efficiently and completely
JQB Shearing pump is one kind of centrifugal pump. The type is overhead belt drive. This give the pump sufficient power and pressure. During operation, JQB shearing pump can enhance the drilling mudhydrocyclonelevel. Make ploydilute soon and save much drilling mud material. Finally cut down the well drilling cost. Features 1.Sufficient power and pressure 2.Small footprint 3.Break down drilling mud block 4.High quality raw material 5.Excellent dilution and hydration ability Benefits 1.Make drilling fluid transfer effectively 2.Use less space, get more effective tank capacity 3.Get more even drilling fluid 4.Durable and low cost on maintenance 5.Save much cost on drilling mud cost
SINO-NSH Vacuum Lubrication Oil Purifier LV series is particularly suitable for purifying turbine lubricating oil. It also applies to treat hydraulic, coolant oil and other lubrication in which contain large amount of water and others such as vapor, impurities, sludge, dielectric and colloid. NSH-LV series will result in the improvement of the properties of turbine oil or other lubrication and extend the maintenance period of turbines or other equipment which have lubrication system and keep them operate in good condition.
Even carrying through regular maintenance carefully installation and operation, the insulation oil may also be contaminated. The electrical equipment would fall in troubles as the declining of the oil�¢??s insulation trait. The expenses and time spend in maintenance of the electrical equipment would far more than that of the insulated oil. The use of Vacuum Transformer Oil Purification and Regeneration Plant is necessary, which will help you maintain optimal oil cleanliness. VFD-R series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters, and remove colloid, pitches and sludge etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, cable and capacitors which has insulation system.
NSH VFD series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, cable and capacitors which has insulation system. VFD series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Sino-NSH-DPCS is an oil filtration and lubricating station with dual system to ensure continuous operation. It is widely used for lubricating the blower, besides it can be used as lubricant for the machine with similar function as blower or motor. It uses for supplying lubricant to blower, motor or other mechanic equipment which will reduce the attrition and make the equipment cool, so then the equipment can run continuously.
Sino-NSH-LF oil flushing system is used to remove harmful contaminants for a large oil system, such as hydraulic control systems, rotating equipment lubrication system, and turbine/generator unit, etc. It will keeps the equipment operating at peak performance and reducing the potential for failure. NSH oil flushing system adopts American advanced fast flushing the system, It not only can purify particles, fibers, clay, or even water and a variety of pollutants in the oil, but also a large number of oil need for rapid purification of the occasion. LF series has high efficiency, low cost, easy operation, safety and reliability.
Sino-NSH-GED-WB is designed to process and recycle waste oils, thereby to acquire high quality base oil. Sino-NSH-GED-WB adopts the advanced technology of vacuum distillation, can effectively remove wearing debris, pitches, waxes, impurities, water, carbon deposits, oxide from the waste oil, as well as decrease the acid. The base oil acquired is with high quality that can meet the standards and requirements for blending various industrial lubrication oils. During the distillation process, a powerful vacuum pump system provides a stable vacuum, the hydrocarbon chain breaks to reform new molecule of the oil, and turns into oil mist. Then it turns to liquid oil by effective condensation. Exhaust gas treatment device is equipped to ensure that emissions gas strictly meets environmental requirements. Sino-NSH-GED-WB is the upgrade model of NSH-GER, saves operating costs and increase oil recovery rate, it can reach high rate above 90%. In addition, NSH-GED-WB has a wider range of applications, can be used to process almost all waste oils, such as engine oil, hydraulic oil, gear oil, etc. Both single oil or oil mixture can be processed and recycled by the system. Various capacities are available for this system to meet different needs of customers, and a variety of heating methods also allow customers to choose according to actual needs.
Sino-NSH-GER is regeneration system for waste engine oil including diesel engine oil, gasoline engine oil, as well as used hydraulic oil and some other machinery's lubrication oils. Sino-NSH-GER is designed with the combination technology of physical and chemical processing, can effectively remove aging products and contaminants from used oil. Physical processing method can remove solid particles, water, gas, etc. Chemical processing method allows removal of colloid, oxide, pitch in the used oil. Specially, this system can restore the color of used oil and remove the scent rapidly. Sino-NSH-GER is an environmentally friendly system, abandon traditional acid processing method, effectively solve the environmental pollution caused by the old technology of waste oil recycling. Various options are available for this system to improve the automation of operation.
Sino-NSH-PF is a portable multi-stages high precision oil purification equipment. Sino-NSH-PF is mainly used to the negative mechanical impurities. Because of flexibility and portability, it is widely used in the fields of power station, petrochemical industry, metallurgy, mechanical engineering etc. For oil filling, oil pumping as well as high precision purifying and pipe cleaning.
Sino-NSH-LV is a dehydration and degassing unit with thermal and vacuum processing. It is a multifunctional purifier which can treat various kinds of lubricant oils. Sino-NSH-LV is mainly used to remove dissolved and free water, and particulate impurities effectively so as to increase special index of lubricant oil. Combining with vacuum system, the multi-stage filtration system adopts a high dehydration efficiency . It has a strong anti-emulsifying capability, which could separate the large amount of water from oil and the trance water from oil. The clearness of final oil can be under 6 NAS and water can be under 100 PPM after processing with our machine. Sino-NSH-LV maintains an optimized structure and safe controls so as to meet comprehensive requirement of transformer manufactures and service companies.
Sino-NSH-TC is a complete oil purification system integrating vacuum oil purifier and centrifugal separator, widely used for the filtration and purification of turbine oil, as well as other lubrication oil. Sino-NSH-TC adopts vacuum and centrifugal technology, designed to meet the device needs of customers. It can effectively remove free water, dissolved water as emulsified water, reduce the water content to less than 100 PPM. Also remove the particulate contamination from oil with high precision centrifugal separator. centrifugal separator is able to remove 99.995% of solid contaminants and 99.4% of water. Various capacities are available for this system, and some optional device such as PLC Control system, Container structure,etc.
Sino-NSH-TF-Z is a dehydration and filtration unit, especially suits for purification of turbine oil and fuel,etc. Sino-NSH-TF-Z combines the latest innovations in coalescence separation technology and micro-glass filter media in one system to achieve optional fluid cleanliness. With specially designed filter elements, it can efficiently separate water from oil quick, break the emulsification, as well as remove particulate pollutants. After separation, the water content can be reduced to less than 100 PPM, and the cleanliness can reach or better than NAS 4-6 Grade. Sino-NSH-TF-Z can effectively save operating cost as no heating or vacuum is required, and it is designed for continuous operating and unattended operation.
Sino-NSH-TF-A is fully automatic unit developed based on NSH-TF, realize the intelligence of the machine and simplify the operation. Sino-NSH-TF-A utilizes the brand programmable logic control and a series of instrumentation, alarms and interlocks to provide a fully automatic operation. Manual control of various functions is provided are required. Several Pilot Lights are provided to indicate operations status of key components and alarm conditions. With full scale of on-line testers and detectors as option, Sion-NSH -TF-A could implement accessible and reliable solutions for unique request and practical usage.
Sion-NSH-TF-E is explosion-proof type designed for flammable and combustible working conditions in power plant, petroleum, chemistry, coal mining, metallurgy and other industries. Sion-NSH-TF-E adds an explosion-proof system compare to NSH-TF, using comprehensive explosion-proof technology. The components such as heating system, electric control system, motor and solenoid valves etc are well-selected explosion-proof type adapt to different danger lever.
Sion-NSH-TF is a filtration and dehydration unit with thermal and vacuum processing. It is ideal for filtration and dehydration of turbine oil. This units can extend turbine oil life by removing contaminates from oil, such as water, gas and particulates, improve the oil properties. Sion-NSH-TF combines vacuum dehydration technology and coalescence technology, can effectively remove both emulsified and dissolved water from turbine oil. Fitted with specially made emulsifying device, it is capable of making turbid emulsified oil very clear. Multi-stage precision filters minimizes impurities and ensures oil cleanliness, which can reach or better than NAS 6 Grade. TF series is particularly suitable for purifying turbine lubricating oil. It also apply to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operate in good condition.
NSH-VFD-A is a fully automatic dehydration and degassing unit. It could be tailored according to practical usage of end-user on either functional or operative consideration. It utilizes the brand programmable Logic Control and a series of instrumentation, alarms and interlocks to provide a fully automatic operation. Manual control of various functions is provided as required. Several Pilot Lights are provided to indicate operational status of key components and alarm conditions.
