This series is used for surface cleaning, rust romoving, and surface intensification of each kind of middle and small scale casting, forging and job. It is suitable for diffenent production scale, can be stand-alone use and many units can also be used in conjunction wi th the continuous conveyor components, composing the production of clean-up lines.
Product Detail: It is special machine used for processing series connection holes and grooves and the transmission device for plastic doors and windows. It is made up three hole drilling unit and copy routing unit. It can drill three horizontal holes and route longround holes in the vertical direction. Two working steps can be finished with one time clamping. It has the features of high accuracy, easy operation. . Main Technique Parameter: Voltage:380V~415V/ 50HZ Motor Power: 2.25Kw Air Pressure:0.5~0.8Mpa Air Consumption:30L/Min Hole Adjusting Range: 330*85*100mm Copy Routing Range: 90~290mm Overall Dimension:1000*1130*1500mm Weight:260KGS HONGKONG
Working blade length:400mm,600mm,700mm,800mm,1000mm,1200mm. The length of blade over 700mm can be used to shear waste car.
Roll turning lathe slotting milling machine.
Aluminum continuous caster rolling mill.
Steel rolling mill.
Steel rolling machine I. Specification of the steel rolling machine(new, second) Dia 650mm, dia 500mm, dia 450mm, rough rolling mill group, dia 400mm rough rolling mill group and medium rolling mill group, dia 320mm medium rolling mill group, dia 300 medium rolling mill group, dia 280mm, dia 250mm, dia 220 finishing rolling mill group. (note: all the groups include motor, speed reduction unit, link-up, guide rail, roller etc.) Ii. Rolling steel products: I-bar, angle bar, u-bar, round bar, deformed steel bar, strap steel, rail steel, steel for agricultural-purpose xxxxx Iii. Types of service: 1. Providing model, design, manufacture, installation and commissioning as to the requirements of the customers. 2. Providing the plane design, general layout of the equipment; process design and products design of steel rolling etc. Various technical design. 3. Dispatching various technical staff to the site for the technical services till the finished products as to the requirements of the customers. 4. Providing long-term technical service to the customers as to their requirements, mainly adjustment of steel rolling mill, new products development, equipment maintenance and improvement.
íºípFinal black oxide treatment is applied for appearance and improved corrosion resistance íºípApplications: automobile industry, electric industry, mechanical industry and military usage íºípOEM and ODM is our specialty íºípWith complex geometry, high density, tight tolerance, and high performance notspecified
íºíp High strength and durability define the requirements for these MIM components íºíp Final black oxide treatment is applied for appearance and improved corrosion resistance íºíp Applications: automobile industry, electric industry, mechanical industry and military usage íºíp With complex geometry, high density, tight tolerance, and high performance íºíp All products meet REACH Standard.
1.Frame welded, vibration to eliminate stress, high in rigidity, sturdy and durable. 2. Hydraulic drive, swing beam, return of knife beam is smooth and prompt by accumulator or nitrogen cylinder, steady & reliable performance. 3.The position of low blade can be adjusted to ensure the equilibrium of the gap after regrinding. 4. The portable and prompt adjustment of the blades' gap, the value of gap is indicated by dial, positioning reliable. 5. Setting the back gauge by motor. The display devices used to the back gauge' value and the shearing times are on the front of the machine. 6.The stroke of knife beam can be adjusted steplessly,conveniently and fast. 7. Preselection of single or continous.Preselection cutting number and cutting strokes. 8. Roller guide to ensure the quality of cutting sheet-metal. 9.Equipped with lighting-alignment,so as to align when shearing. 10.Protection fence and the electric interlocker to ensure the operation safety. QC12Y4*3200/60*3500,W11S45*3000/110*4000.
To process with this machine it is not necessary to beat flat the bevel edge, and it can realize at-one-time moulding. Having been heated, the material end can be rolled to have distinct fishtail veining of scalloping shape. The rolled material end becomes wider and thinner with the end thickness not more than 2mm, which being called as "fishtail" belongs to advanced process before metal pattern bending. The machine can process maximum products: 16mmí-16mm square steel, 16mm round steel, 50mmí-8mm flat iron. By the machine we can roll not only coarse fishtail but also thin fishtail.
The machine is the second generation of AB-C1 General Electric Pipe Bender. Compared with the first generation AB-C1 bender, the space length of the two driving shafts of the machine is adjustable, thereafter we can bend various diameter parts: round tube, square tube, rectangular tube, as well as large and small diameter arc and round products. Owing to the adjustable transverse distance of the two shafts, it can process thick and large tube easily. In operation we can get arc and round parts with different diameters by controlling the press-down sizes of the driven roller. The machine has large processing ability, and can be used extensively and laborsaving. There are 9 kinds of dies as the machine attachments, including 8 sets of square tube dies: 15,15mm, 20,20mm, 25,25mm, 30,30mm, 40,40mm, 50,50mm, 60,60mm, 70,70mm,above dies can be used to bend rectangular pipes, as well as 1 set of straight flat iron bending dies. In addition, there are 9 sets of round tube dies for selection: 16mm, 19mm, 22mm, 24mm, 30mm, 36mm, 50mm, 63mm, and 76mm.
We supply all kinds of shotblasting machine, including Q32,Q37,Q15GN,QG and Q69. They have passed the ISO9001 international standards.
Curve blade blasting wheel: This kind of blasting wheel own strong power and is designed through introducing foreign advanced technology. It has the following advantages including big speed,high efficiency,evenly shot blasting and so on. QT360 beeling blasting wheel: It is important part for shot blasting.It is a new type blasting wheel for saving energy.After control cage and blade are improved,QT360 blasting wheel could own higher efficiency. Even though the technology person is not familiar with the blasting wheel, the technology person also could simply maintenance.It has the following advantages: Anti-fatigue`s life will be improved 60% Maintanance cost could reduce by 50%.
Offer slitting line which is for slitting the steel coils to strips coils. It is composed of coil lifter, decoiler, slitting machine, scrap recoiler, recoiler, etc. It can slit the cold rolled steel coil, galvanized steel coil, color-coated steel coil, stainless steel coil, etc. Its speed has 100m/min and 40m/min for option. Most of this slitting line is no packed, electric parts packed by box usually.
Nominal capacity: 1000ton Ram stroke: 700mm No. Of stroke: 10 Mini shut height: 700mm Working table: 1200x1000mm Motor power: 90kw. Weight: 85000kg Overall size: 5355x4900x7290mm
Dc-2500c cold chamber die casting island to automatically produce the four- cylinder for automobile. Simple package.
Ball forging machine.
Rebar bend Packing size:1270, 490, 820mm Gross weight: 412kg
Elbow maker MF-E1000 Capacity: Max. Thickness 1.2 mm Diameter : 125 - 1000 Motor Power : 1.5 (KW) : (2 motors) Speed: 4 m/min Weight: 750 Kg
