Perforated metal mesh is used in a variety of applications and industries including air diffusers in the HVAC market, acoustical panels for noise control, as filter media or support in the water filtration industry, and as architectural elements in building construction. The uses of perforated metal are unlimited. If you have an application that required control of light, sound, air, water, or particles, perforated metal might be your solution. The materials of perforated metal metal mesh could be Carbon Steel,Mild Steel, galvanised steel, stainless steel type 304 and 316, and aluminium are all standard lines. Sheets and half sheets up to 5mm thick with holes sizes 0.4 to 20mm can be available,and cut to size or custom fabricated. Perforated metal mesh with series of Hole Pattern: holes, square hole, lozenge holes, round hole, hexagonal hole, the cross hole, triangle holes, long round hole, long waist hole, the plum flower hole, the scales of holes, pattern of holes, pentagram hole, irregular holes, up drum hole etc. Perforated metal panels can be finished with a variety of coatings to enhance its appearance or increase its longevity. Perforated metal is a highly sustainable material as it lasts generations without needing to be replaced. Perforated metal can be produced from recycled material and can also be completely recycled when its usefulness is over. Pallets: 1000*2000*1000mm.
Mandrel bar plays a crucial role in producing large diameter seamless pipes in modern industries. In production line, it have to bear strong and complicate stretch, compressing touching stress and high temperature cold-hot yield stress under high speed cycling. Under these circumstance, chemical components, mechanical propertied, no-metallic inclusion, grain size, microstructure, ultrasonic test, size precision, surface finish, all these factories of steel are required very strictly. Mandrel bar is made from H13(4Cr5MoSiV1), With annual output of 15 thousand tons, its quality and service life have reached to world level of that. Our company is capable of producing a series of mandrel, such as MPM, PQF, FQM, with the diameter of 80~350mm, the length of 2500-17500mm. Equipment advantage: steel making (EBT+LF(VD)+ESR)-forging(formed by hydraulic press machine + forged by rotary forging machine)-annealing-rough machining ¨Cmagnetic test-heat treatment-ultrasonic test-finish machining-chrome plating-thread phosphating.
Our products include various rare metals products in form of plate, bar, rod, wire, pipe, crucible, sputtering target, machining part, and heat elements, and corrosion-resistance parts as well.
G01wall thickness: 2.0¡À0.2mm 51 x 51 x 650 51 x 102 x 750 71 x 71 x 750 77 x 77 x 750 91 x 91 x 750 96 x 96 x 750 102 x 102 x 750 102 x 102 x 850 On pallet.
G07wall thickness: 2.0, 0.2mm 71 x 71 x 150 91 x 91 x 150 101 x 101 x 150 102 x 102 x 150 On pallet.
1.particle size:2-500 micron, we have a lot of productions in this range,such as 2-3,3-4,4-5,5-6 ,8-10,10-12,12-14 micron and so on. 2.Purity:Above 99.75%. 3.Capacity:8000 ton per year. 200kg,40kg drum,also other package according to yours requests.
1.Particle size:2-500 micron, we have a lot of productions in this range,such as 2-3,3-4,4-5,5-6 ,8-10,10-12,12-14 micron and so on. 2.Purity:Above 99.75%. 3.Capacity:8000 ton per year. according to yours requests.
We are a manufacturer and exporter specialized in producing copper powder including water atomized pure copper powder, brass powder (CuZn30, CuZn20), bronze powder (CuSn10, CuSn13) and copper alloy powder (CuPb10Sn10, CuPb30, CuPb24Sn1, CuPb3Sn6Zn6, CuPb7Sn7Zn3, CuSn6.5P0.3 etc.) 25kg/barrel.
Aluminum alloying tablets are used to adjust the content of metallic element in the manufacture of high quality aluminum alloys, providing the following benefits: - high element recovery rate (typically over 95%) - rapid dissolution at normal casthouse operating temperatures - accurate and clean addition - concentrated form means reduced inventory, transport and storage costs. Two or three tablets wrapped directly by aluminum foil. 20kgs in a cardboard.
Application AlTiB produces an equiaxed fine grain structure in cast Aluminum Alloys, providing the following benefits: -Improved homogeneity -Uniform distribution of elements -Elimination of hot tearing -Enhanced response to heat treatment -Superior mechanical properties -Increased machine ability. Size Available in the form of: 1. Cut rod: diameter 9.5mm length: 10¡ª1000mm 2. Coil: 180kgs/coil 3. Small ingot: 250g/pc Also can produce as per customer require.
Application Hypoeutectic and eutectic modification of Al-Si casting alloys Specifications AlSr3.5% AlSr10% AlSr up to 15% Size Available in the form of: 1. Cut rod: diameter 9.5mm length: as you require 2. Small ingot: 250g/pc.
Tungsten carbide products
Tungsten dart barrel Barrel forms the main part of dart. Tungsten is a very dense material, so tungsten dart can be made quite slim as to give user a safe and easy grip. Commonly, the barrel material is tungsten based heavy alloy billet. At xiamen eternal tungsten, we can make w-ni-fe barrel, w-ni-cu barrel, w-ni-cu-fe barrel, etc for tungsten dart. Also, we can make products according to customer demand. 2ba
Alloy with high and stable resistance, corrosion resistance, surface oxidation resistance is good, a better under high temperature and seismic strength, good ductility, good workability and weldability, is widely used in industrial electric furnace, metallurgy, household appliances, machinery manufacturing, heating element and resistor varistor other material.
Alloy with high and stable resistance, corrosion resistance, surface oxidation resistance is good, a better under high temperature and seismic strength, good ductility, good workability and weldability, is widely used in industrial electric furnace, metallurgy, household appliances, machinery manufacturing, heating element and resistor varistor other material.
Alloy with high and stable resistance, corrosion resistance, surface oxidation resistance is good, a better under high temperature and seismic strength, good ductility, good workability and weldability, is widely used in industrial electric furnace, metallurgy, household appliances, machinery manufacturing, heating element and resistor varistor other material.
Alloy with high and stable resistance, corrosion resistance, surface oxidation resistance is good, a better under high temperature and seismic strength, good ductility, good workability and weldability, is widely used in industrial electric furnace, metallurgy, household appliances, machinery manufacturing, heating element and resistor varistor other material.
Alloy with high and stable resistance, corrosion resistance, surface oxidation resistance is good, a better under high temperature and seismic strength, good ductility, good workability and weldability, is widely used in industrial electric furnace, metallurgy, household appliances, machinery manufacturing, heating element and resistor varistor other material.
Name: Magnesium Chloride Anhydrous CAS Number: 7786-30-3 Pubchem: 24584 EC No.: 232-094-6 Properties: Molecular Formula: MgCl2 Molar Mass: 95.211 g/mol Appearance: white or colorless crystalline solid Boiling Point: 1412 C Solubility in water: Temp. 20 C 54.36 g/100ml Temp. 100 C 72.6 g/100ml. 25kg or 50kg in a PP bag or as clients' request.
Aluminium alloy
