PAC Poly Aluminium Chloride CAS No. 1327-41-9 Product Description Poly Aluminium Chloride is an inorganic high-molecular polymer with gelling property. It could be used as cementing material in fireproofing material, Ultrapure alumina products, refractory concrete etc. Usage Poly Aluminium Chloride is an flocculant mainly used in the purifying of drinking water. It is also used in the special water treatment, such as removal of iron, cadmium, fluorine, radioactive pollutant, oil slick etc. It could also be used in industrial waste water treatment, such as the waste water treatment of dying industry. It is also widely used
Usage biocides in broad spectrum. It is widely used in industrial circulating water system, large air-condition and the large center of sewage treatment to eliminate microorganism and alga and shuck off clay. It is also used in the process of paper making to prevent reducing quality of paper by generation of microorganism . It is suitable for metal cutting of cooling liquor, recovery system of oil, latex and ply-woods as anti-spy biocides. It has following advantages :Easy to handle .No unusual oxidation hazards .Similar performance and safety in paper and oilfield applications . Package 25kg bag,250kg Bag,500kg Bag
PC-37 Polyurethane catalyst: PC-37 CAS:1704-62-7 2-[2-(Dimethylamino)ethoxy]ethanol Overview: Common Name: 2-[2-(Dimethylamino)ethoxy]ethanol Other Chimical Names: 2-[2-(dimethylamino)ethoxy]-ethano;Ethanol, 2-2-(dimethylamino)ethoxy-;N,N-Dimethyl-2-(2-aminoethoxy)ethanol;Dimethylaminoethoxyethanol;N,N-Dimethyldiglycolamine;Texacat ZR-70
PC-37 Polyurethane catalyst: PC-37 CAS:1704-62-7 2-[2-(Dimethylamino)ethoxy]ethanol Overview: Common Name: 2-[2-(Dimethylamino)ethoxy]ethanol Other Chimical Names: 2-[2-(dimethylamino)ethoxy]-ethano;Ethanol, 2-2-(dimethylamino)ethoxy-;N,N-Dimethyl-2-(2-aminoethoxy)ethanol;Dimethylaminoethoxyethanol;N,N-Dimethyldiglycolamine;Texacat ZR-70 MF C6H15NO2 MW 133.19 CAS 1704-62-7 Physical and chemical properties: Form: liquid Odour: mild, amine-like Colour: colourless to yellow pH value: 11.5 ( 1 g/l) Melting point: -7. C Boiling point: 2.3.5 C ( 1,.13 hPa) (other) Vapour pressure: 1 mbar ( 25 C) Density: 0.9549 g/cm3 ( 2. C) (other) Relative density: 0.9549 ( 2. C) (other) Literature data. Partitioning coefficient n -1.21 (calculated) octanol/water (log Pow): Viscosity, dynamic: 1. mPa.s ( 25 C) Solubility in water: Molar mass: 133.19 g/mol
AMINOETHYLETHANOLAMINE (AEEA) CAS: 111-41-1 Overview: IUPAC name: 2-(2-aminoethylamino)ethanol Other Chimical Names: 2-(2-AMINOETHYLAMINO)ETHANOL;AMINOETHYLETHANOLAMIN;AMINOETHYLETHANOLAMINE;AMINOETHYETHANOLAMINE;AEEA;HYDROXYETHYL-ETHYLENEDIAMINE;LABOTEST-BB LTBB000455;N-HYDROXYETHYL-1,2-ETHANEDIAMINE MF C4H12N2O MW 104.15 CAS 111-41-1 Physical and Chemical Properties Physical state (25C): viscous liquid Colour: Colorless Boiling point/range: 243 C/1013hPa Flash Point: 132 1013hPa Relative density: 1.026g/cm3 Solubility(ies): Water Soluble Features and uses: AMINOETHYLETHANOLAMINE (AEEA) CAS: 111-41-1 contains primary and secondary amines Linear molecular structure of groups. AEEA is a colorless liquid, have higher viscosity than ethylenediamine (EDA) and diethylenetriamine (DETA) . AMINOETHYLETHANOLAMINE (AEEA) has unique properties and is commonly used in the production of detergents, fabric softeners Chemical intermediates for agents, chelating agents, fuel additives and coatings. Storage Information Store in a cool and ventilated warehouse. Keep away from fire and heat source. Keep out of direct sunlight. Keep the container sealed. It should be stored separately from oxidants and edible chemicals, and avoid mixed storage. Fire fighting equipment of corresponding variety and quantity shall be provided. The storage area shall be equipped with leakage emergency treatment equipment and suitable storage materials. Package: 200KG/Plastic Bucket
1. Product indicators Appearance White crystalline powder Effective content,% above 99 Melting point, 78-81 Loss on drying,% no above 0.5 Volatiles,% no above 0.5 Hydroxylamine hydrochloride,% no above 0.2 2. Package specification 1.0kg 10 bottles / box 10kg / cardboard barrel 20kg / cardboard barrel 3. Storage method Avoid freezing environment, store in a dark, cool and dry place, room temperature and sealed.
Monopotassium phosphate, short as MKP, in NPK formulation: 00-52-34. It is a white crystal free flowing product known as the most efficient source of phosphorus and potassium suitable for preparation of fertilizer blends and for production of liquid fertilziers. Product Characteristics Crystalline product, fully water soluble Low on sodium, chloride or other detrimental elements to plants A highly efficient source of phosphorus and potash When high levels of phosphorus required in combination with potash Used for foliar feeding, fertigation and as an ingredient in NPK S Compatible with most water soluble fertilizers
Application:It is used in the manufacture of adhesives, rubber, cosmetics and industrial cleaners, as well as in metalworking. Features and Benefits: 1.Fine crystal structure 2.High hardness 3.wear resistance and high stability Properties Unit Test Method Specifications Results Melting point C GB/T 8026 112.5-117 113.5 Congealing point C ASTM D938 98-102 99.7 Penetration 0.1mm/100g 5s at25 C GB/T 4985 1 0.6 Oil content % GB/T 3554 0.5 0.08 Colour:White powder Packing:25 KG Valve bag / 980KG Jumbo bag
TBN Booster additive is the only fortified engine oil stabilizer that increases total base number (TBN) and viscosity by replenishing the detergents and dispersants that are naturally lost over time. When these detergent and dispersant additives are replenished, your oil will be able to effectively neutralize the acidic conditions that corrode your engine. Better compounding synergistic effect can be obtained with the addition of ashless dispersant, anti-oxidant and corrosion inhibitor. APPLICATION Detergent and corrosion inhibitor for fuel oils It gives better performance at lower concentrations and also cost effective. Corrosion Inhibition Dispersant Detergency TBN600 Magnesium Sulfonate TBN400 Magnesium Sulfonate TBN400 Calcium Sulfonate for Grease TBN400 Calcium Sulfonate TBN300 Calcium Sulfonate TBN300 Sulfurized Calcium Alkyl Phenate TBN300 Alkyl Calcium Salicylate TBN270 Sulfurized Calcium Alkyl Phenate TBN160 Alkyl Calcium Salicylate TBN160 Sulfurized Calcium Alkyl Phenate TBN160 Calcium Sulfonate TBN30 Calcium Sulfonate
Chemical name: N,N-bis(2,2,6,6-tetramethyl-4-piperidyl)-N,N diformylhexamethylenediamine CAS No 124172-53-8 Molecular formula:Â C26H50N4O2 Molecular weight: 450 Molecular structure Specification Appearance: White to off white crystalline powder Purity, %: 99 min. Loss on drying,%: 0.5 max. Melting point: 155-158 degree Application LIGHT STABILIZER LS-4050 is a low molecular weight hindered amine light stabilizer (HALS) for applications demanding particularly high light stability. It provides excellent light stability for thick sections but can also be used for articles with a high surface area such as films and tapes. It is suitable for the stabilization of polyolefins, particularly in thick-walled PP molding and PP fibers, as well as ABS, PS, PA and polyesters.It is highly compatible with pigments.
White fused alumina for sandblasting abrasive utilized by unique advanced technology. It is characterized by short grinding time, high efficiency and so on. In particular, its advantages such as high hardness, good chemical stability and unique self-sharpening , it becomes the first choice for the sandblasting technics, meanwhile, it is also the ideal material for sandblasting and derusting, workpiece cleaning, and polishing.
p-toluidine(CAS:106-49-0)
N-Phenylglycine(CAS:103-01-5)
Sodium carboxymethyl cellulose(CMC), also known as: Sodium CMC, cellulose gum, CMC-Na,is cellulose derivatives,which is the most widely used and the largest amount in the world. it is a cellulosics with a glucose polymerization degree of 100 to 2000 and a relative molecular mass of 242.16. White fibrous or granular powder. Odorless, tasteless, tasteless, hygroscopic, insoluble in organic solvents. CMC is an anionic cellulose ether, white or milky white fibrous powder or granule, density 0.5-0.7 g/cm3, almost odorless, tasteless, and hygroscopic. Easily disperse in water into a transparent gel solution, insoluble in organic solvents such as ethanol. The pH of 1% aqueous solution is 6.5 8.5. When pH 10 or
Rosin-free fux is a new generation of resin-free, halogen-free, low-solids environmentally friendly no-clean flux that is suitable for high-precision multilayer boards and electronic equipment soldering. It is suitable for foaming, spraying, dipping, brushing and other methods. There is no waste problem, it does not pollute the working environment, and does not affect human health. Certificate ISO, etc. Payment method T/T,Western Union,L/C,etc. Specification 20L/barrel,or as required Package Standard export packaging or as required. Application Chemicals that promote welding. Price: $54,585 -- 20,562 / kg Specification: 20L/ barrel, OR AS Required Type: Solder material Packing: in barrel
Appearance:White to almost white powder to crystal. Application:Heat sensitive and pressure sensitive recording materials, thermochromic paints and inks.
Appearance:White to almost white powder to crystal. Application:Heat sensitive and pressure sensitive recording materials, thermochromic paints and inks.
It can be used as intermediate in compound synthesis
Appearance:White to almost white powder to crystal Application:Heat sensitive and pressure sensitive recording materials, thermochromic paints and inks
Diethylenetriaminepentaacetic acid 67-43-6
