Glass fiber tube is also called glass fiber tube, glass fiber sleeve, which is a special glass fiber sleeve which is made of glass fiber woven into pipe and treated by high temperature setting process; Glass fiber tube is divided into silicone glass fiber tube and silicone rubber glass fiber tube. Silicone glass fiber tube, also known as silicon casing or self quenching tube, is made by weaving alkali free glass fiber into a tube and then dip and coat silicone resin, and heat and cure it. The silicone rubber glass fiber tube is composed of high quality silicone rubber layer and glass fiber braid layer, which can be divided into two types: inner rubber outer fiber glass fiber tube and inner fiber outer rubber glass fiber tube. According to the voltage resistance grade, fiberglass pipes can be divided into 1.5kV glass fiber pipe, 2.5KV glass fiber pipe, 4KV glass fiber pipe and 7kv glass fiber tube.
Description Alkali resistant fiberglass mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex. It has fine alkaline-resistant, high strength, etc. As an ideal engineering material in construction, it is mainly used to reinforce cement, stone, wall materials, roofing, and gypsum and so on. We can produce any size mesh according to requirements of customer like different mesh size and weight per square meter. We can supply special mesh as following 1. High strength mesh, 2. Fire proof mesh . 3. Strong and fl exibl e mes h We can supply specifications from 30g/m2 to 500g/m2 for mesh. Main size: 5mm x 5mm or 4mm x 4mm, 75 g/m2, 90 g/m2, 125 g/m2,145 g/m2, 160 g/m2. Application 1. Wall reinforced material (such as fiberglass wall mesh, GRC wall panels, EPS insulation with the wall board, gypsum board, bitumen) 2. Reinforced cement products. 3. Used for Granite, mosaic, marble back mesh etc. 4. Waterproof membrane fabric, asphalt roofing. Example of applications 1. 75g / m2 mesh fabric used in the reinforcement of thin slurry, to eliminate small cracks and scattered throughout the surface pressure. 2. 110g / m2 mesh cloth is widely used in indoor and outdoor walls,prevent the various materials(such as brick, light wood, prefabricatedstructure) of treatment or caused by a variety of expansion coefficient of wall crack and break. 3. 145g/m2 mesh fabric used in the wall and be mixed in variousmaterials (such as brick, light wood, prefabricated structures), to prevent cracking and scatter the whole surface pressure, especially in the external wall insulation system (EIFS). 4. 160g / m2 mesh fabric used in insulator layer of reinforcement in the mortar, through shrinkage and temperature changes by providing a space to maintain movement between the layers, prevent crack and rupture due to shrinkage or temperature change. Specification Mesh size 5x5 mesh, 5x4 mesh, 4x4 mesh, 3x3 mesh, 2.5x2.5 mesh, 1x1 mesh Weight/square meter 60g-300g Each roll length 10m, 20m, 30m, 50m-300m Width 0.5m-2m Mesh size 16x16 mesh, 15x14 mesh, 12x12 mesh, 10x10 mesh, 9x9mesh, 8x8 mesh, 6x6 mesh Weight/square meter 40g-120g Each roll length 10m, 20m, 30m, 50m-300m Width 0.05m-2m Packing plastic packing or woven bag or packing according the customer's requirements Color white,blue,green,red,yellow,
Silicon coated fiberglass sleeving (Self- extinguishing fiberglass sleeving) is braided with non-alkali fiberglass yarn and then coated with a special kind of silicone resin. It possesses good properties of dielectric, heat resistance, self- extinguishing, softness and elasticity etc. These sieevings are widely used as wiring insulation and protection tor H grade electrical motors, domestic appliances and electric apparatus etc.
Description: PTFE coated fiberglass fabric is fiberglass cloth coated with Polytetrafluoroethylene on the surface to meet customer demands. It offers excellent features such as anti-static, fireproof, heat resistance, corrosion resistance, chemical resistance, waterproof, non-adhesiveness, low coefficient of friction, high tensile strength. PTFE coated fiberglass fabric is compliant for use in high temperature insulation, removable covers and blankets, pipe insulation, food processing, packaging, and handling. Features: fireproof, heat resistance, corrosion resistance, waterproof, anti-static Application: thermal insulation jacket, high temperature insulation, removable covers and blankets, pipe insulation UNIT: square meter MOQ: 500square meter Weight: 400gsm-800gsm Width: 1m, 1.2m 1.5m or customized Yarn Type: E-glass Standing temperature -70-260 degree centigrade Roll length: 50 meter or customized Color: brown, black, white, grey, blue, or customized Weave Type: plain woven Alkali content: alkali free Processing service: cutting Material: fiberglass PTFE Thickness: 0.3mm to 0.8mm Size: can be customized Supply ability: 300000 meters per month Packaging: PTFE coated fiberglass fabric rolls packed in cartons loaded on pallets or according to customers requirements Lead time: 7-30 days
Fiberglass Woven Roving Fiberglass woven roving are bidirectional fabric made by interweaving direct rovings. Fibre glass woven roving are compatible with unsaturated polyester, vinyl , epoxy and phenolic resins. Glass fiber woven roving are high-performance reinforcd material, widely used in hand lay-up and robot process to manufacture boats, vessels, plane and automotive parts, furniture and sports facilities.Plain weave Fiberglass woven roving have E glass and C glass glass type.
Fiberglass cloth is made of high strength E glass fiberglass yarn, it is divided into plain weave, twill weave or stain weave .It has good insulation, heat resistance, good corrosion resistance and tensile strength. It can be compatible with polyester, epoxy and vinyles ter resins, and is widely used in mica tape,fiberglass tape ,aircraft industry, ship industry, chemical industry, military industry and sports goods, etc. Product Properties: 1.High intensity and quick wet out 2.Perfect designable character 3.Anti-corrosion and electric insulation
FYGRP FRP/GRP Pipes are made by filament winding machine imported from Italy range from diameter of 100 mm to 25000 mm and customized lengths are available on request. Composite material glass fiber and polyester resin, characteristics of lightness, high strength, distinguished corrosion resistance and expedient installation and maintenance etc.
Fiberglass cloth is widely used in glass fiber reinforced plastics industry and other chemical corrosion, fire resistance materials and projects.
It is made of high strength C glass fiberglass yarn. It is divided into plain weave, twill weave or stain weave. It has good insulation, heat resistance, good corrosion resistance and tensile strength. It can be compatible with polyester, epoxy and vinyles ter resins, and is widely used in mica tape,fiberglasstape,aircraft industry, ship industry, chemical industry, military industry and sports goods, etc.
Fiberglass fabric is made of high strength E glass fiberglass yarn, it is divided into plain weave, twill weave or stain weave .It has good insulation, heat resistance, good corrosion resistance and tensile strength. It can be compatible with polyester, epoxy and vinyles ter resins, and is widely used in mica tape,fiberglass tape ,aircraft industry, ship industry, chemical industry, military industry and sports goods, etc.
Double-layer fiberglass tube, exclusive supply by SUNBOW, you can not find other suppliers in China When it comes to fiberglass tubes, domestic products are all the same, all are single-layer fiberglass tubes. Only SUNBOW is unique in launching double-layer fiberglass tubes. Exclusive supply, you can't find other suppliers in China. At present, the fiberglass tubes provided by domestic counterparts are all single-layer fiberglass tubes without exception. Some peers even changed the concept and called the thickened single-layer fiberglass tube as a double-layer fiberglass tube to confuse customers. However, SUNBOW developed such a double-layer fiberglass tube at the request of the customer, and the customer was 100% satisfied. A customer of a certain brand of motors in Brazil has been searching for double-layer fiberglass tubes in the Chinese market for a long time. More than 95% of the suppliers can provide thickened single-layer fiberglass tubes, and the customers are not satisfied. The customer saw our booth at the Berlin Exhibition in Germany in 2016. The customer wants to use double-layer glass fiber tube insulation on a motor. Ask if we have similar sleeves. Single-layer glass fiber tube can be used as Base, add another layer. At that time, we did not have such a casing, and the entire industry had not heard of such a practice, and the cost would be high. Customers have found several suppliers in China, and they do not have similar double-layer fiberglass tubes, and can only use thickened single-layer fiberglass tubes for testing. However, even the thickened single-layer fiberglass tube is still thin. Once the motor rotates, it is easy to break, which leads to the need to re-thread the motor. After understanding the customer's application, we promised the customer: "We can try to develop the customer's needs, but it takes a week." After a week, we submit two samples to the customer for testing, one is the thickened single layer on the market Fiberglass tube, cheap price and short delivery time. The other is double-layer glass fiber tube, which is expensive and has a long delivery time. However, both samples meet customer's application requirements. At that time, we were able to complete the research and development of a new type of double-layer glass fiber tube in seven days, and the performance reached the level of customer satisfaction, which was beyond our expectations. After testing, the customer finally chose this double-layer fiberglass tube, even if the price is expensive, the customer also chose it.
PEEK450GF30 30% Glass Fiber Polymers Engineering Plastic for Tube Pipe, Sheet Plate, Rod Bar, Parts Fittings.
The spec as follows: Name:E- Fiber glass micron:9-11micron Length:30cm-70mm Color:white We also can supply it with your requirements.Please kindly give us your requirements.
Its working temperature is -40~155 degree.It is braided by superior fiberglass,then coated with acrylic resin and treated in suitable high temperature.Its characteristics is flame resistance,oil resistance,good mechanical resistance,good fray resistance,etc.It is uesd in internal wiring of rotating ,motors,alternators,generators,transformers,inverter sleeving for cable assemblies.
Its working temperature is 400~500degree,it is composed of woven non-alkali fiberglass and treated in high temperature.Its characteristics is self-exstinguish,good mechanical resistance,high temperature and good dielectric strength.Widely used in heating elements,domestic electrical heating appliances and cooking appliance.
Its working temperature is -60~200,It is braided by non-alkali fiberglass,then coated with silicone resin and treated in high temperature.Its average is 1.2KV,1.5KV,2.5KV,4KV,7KV. Flammability:self-exstinguish,wear resistant,tear resistant,good compatibility with same class impregnation varnishs,good mechanical resistant,very flexible. We got UL,REACH,ROHS,SGS,ISO9001:2015,TS16949 and so on certifications.
It is braided by non-alkali fiberglass, then coated with silicone resin and treated in high temperature Flammability: self-extinguishing, wear resistance, tear resistance, good compatibility with same class impregnation varnishes, good mechanical resistance, very flexible Internal wiring of electronics, electrical appliances and automotive, classes H and C motors, transformers, generators, heating apparatus, lighting, control, inverter, etc.
Fiberglass sleeving coated silicone resin Model Number: SB-SGS-12 Working temperature: -60~200ºC Structure It is braided by non-alkali fiberglass, then coated with silicone resin and treated in high temperature. Characteristics Flammability: self-extinguishing, wear resistance, tear resistance, good compatibility with same class impregnation varnishes, good mechanical resistance, very flexible Application Internal wiring of electronics, electrical appliances and automotive, classes H and C motors, transformers, generators, heating apparatus, lighting, control, inverter, etc. Specification Item Performance Note Dielectric breakdown Voltage KV AC Minimum average â?¥1.2 Before aged Thermal endurance No Indication of crack OK 6 HRS* 245±5ºC 245±5ºC 6HRS AGING Fire resistance VW-1 OK UL 1441 Dimension Size from ID0.5mm to 30mm Package: Packing by rolls or cut upon request. Color: Standard color is white, other color available upon request. The colors of braided can be customized.
fiberglass braided sleeve Model Number SB-SGS-15 Working temperature: -60~200ºC
Fiberglass Insect Screen It is made through fiberglass monofilament plastic coating and plain weaving. All the remaining materials are finished in one time via PVC plastics. Fiberglass window screen Weaving and technology: adopt glass fiber monofilament plastic coating technology and is made through plain weaving, heating and sizing. Material of glass fiber window screen: glass fiber screen, coated PVC, 65%s plastic content, 35%s glass fiber yarn; fire resistance â?¦5 seconds (international standard) Mesh: 12x12 mesh, 14x14 mesh, 16x16 mesh, 18x16 mesh, 19x17 mesh, 20x20 mesh (inch); Specification and dimension: width of the glass fiber window screen as produced by our factory: 0.3-3.2m; length: 13m-300m; Color: white, black, gray, hoary (longitude: gray; latitude:white); besides, blue, green, yellow, coffee and other colors can be customized separately. Weight: 90g-135g/m2; Remarks: We offer ten meters product if the window screen produced by our factory one meter shorter than the expected length. In case of quality problem, we offer refund or change no matter the quantity. And the total transportation cost shall be paid by our factory.
