Fast Cure 2inch 460cm Pipe Fiberglass Wrap Fix Tape Rapid Stock Leak Wrap Repair Bandage It is a roll of fibreglass bandage impregnated with water-activated resin. You simply immerse the bandage in water for 10 seconds, then apply by wrapping around the damaged pipe area. A successful pipe repair can be achieved in 30 minutes. Introduction of Fiberglass wrap repair bandage The Pipe Repair Bandage is an innovative and cost effective solution to repairing pipework without any welding, cutting or draining down of your system.The bandage simply works on contact with moisture and water. 1. Materials: fiberglass or polyester fabri impregnated with water-activated resin 2. Width Size: 2.5cm;5cm;7.5cm;10cm;12.5cm;15cm; Length: 1m; 1.5m; 3.6m; 4m 3. Shape: customized Instruction of Fiber glass repair fix bandage 1.shut down pipe, soak bandage in water for 10 seconds; 2. wrap it around the pipe, over steel putty, tighten firmly; 3. allow 30 minutes for pipe repair to set rock hard Application of Fiber glass repair fix bandage 1. Fiberfix tape Emergency pipe repair bandage fibre fix tape leak repair wrap water activated resin wrap Fiberglass repair tape 2.Steel and Aluminum Works: Steam and water pipes, sludge and slurry lines 3.Petroleum Plants: Repair on flammable pipe leaks without using tools - oil, gas, water supply lines 4.Power Stations: Ash transfer systems, pulverized fuel tubes, cooling water lines. 5.Manufacturing: Sealing of leaks in oil, water and coolant pipes. 6.Pipe Porosity: Strengthens and seals pipes with porosity due to internal corrosion or crack. 7.Merchant Shipping, Yachts: Emergency repairs in dock or whilst at sea to fuel lines, water pipes 8Waste pipes. Also for repairs to ship's structure. 9.Household: Repair pipe of glass, PVC, metal, strengthen shank of garden tools, household appliances Fiberfix tape Emergency pipe repair bandage fibre fix tape leak repair wrap Precautions of Fiber glass repair bandage 1.The operator should wear gloves before touch the bandage. 2.Storage at temperature(4080) 3. Shelf-life: 2 years. 4. Apply under 450psi wa
Fiberglass grid use high-quality enhanced E-glass fiber yarn, made by foreign advanced warp woven into a substrate, the use of warp-oriented structure, make full use of fabric yarn strength, improve its mechanical properties, to have a good Tensile strength, tear strength and creep resistance, and through high-quality modified asphalt coating from the plane network-like material. The principle of similar compatibility, focusing on its composite properties with the asphalt mixture, and fully protect the glass substrate, greatly improving the substrate wear resistance and shear resistance, which can be used for pavement enhancement, resistance Crack rutting and other road diseases, solved the problem that asphalt pavement is difficult to improve. Specification: Width: 3mm or 4mm or as clients request Length: 100m or as clients request FUNCTION: High tensile strength, low elongation - fiberglass geogrid is based on glass fiber as raw material, has a high resistance to deformation, fracture elongation of less than 3%. No long-term creep - as a reinforcement material, with the long-term load in the case of resistance to deformation, that is, anti-creep is extremely important, glass fiber does not creep, which ensures long-term product performance. Thermal stability - glass fiber melting temperature above 1000 â??, which ensures that the fiberglass geogrid in the paving operations to withstand thermal stability. Compatibility with asphalt - fiberglass geogrid The material coated in the post-treatment process is designed for the asphalt mixture, and each fiber is fully coated and has a high phase with the asphalt Capacitive, thus ensuring that the fiberglass geogrid in the asphalt layer will not be isolated with the asphalt mixture, but firmly together. Physical and chemical stability - after a special post-treatment agent for coating, fiberglass geogrid can resist all kinds of physical wear and chemical erosion, but also to resist bio-erosion and climate change, to ensure its performance is not affected. Aggregate insert and limitation - Since the fiberglass geogrid is a mesh structure, the aggregate in the asphalt concrete can penetrate it, thus forming a mechanical insert. This restriction hinders the movement of the aggregate so that the asphalt mixture can achieve better compaction, higher load bearing capacity, better load transfer performance and smaller deformation under load conditions. APPLICATION: Roadbed reinforcement, prevent road surface cracking. Road reconstruction. Soft soil reinforcement, improve road whole bearing capacity and prevent cracking.
Description of orthopedic casting tape: It is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It is used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint. It is the upgraded and replaced product of the traditional plaster bandage.Age. Advantages of orthopedic casting tape: High strength, light weight molding fast Good air permeability Excellent x-ray radiolucency Waterproof Environmentally friendly Simple operation Operation of medical disposable casting tape: 1. Wear the surgical gloves and choose the proper specifications. 2. Put the cast padding or stockinet on the fixed part. 3. Open the package and take out the cast, immerse the cast in room temperature water at 3-5 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally on injured parts with 2~3 layers, overlapping the previous layer by one-half or two- thirds the width of the roll. 5. Shape according to the need, smooth and rub the surface to achieve good contact between layers. 6. Use the electric cast saw to cut and remove it. Certificates of orthopedic casting tape: ce & fda Package:oem service is available Storage & warranty: Be careful not to break the packaging Storage at room temperature Shelf-lift: 2 years Shipping: within 15 working days after payment Exhibition: Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products, such as fiberglass casting tape, splint , also supply cast padding, stockinette, elastic bandage, crepe bandage, cohesive bandage, gloves and electric cast saw
Standard Panel Size: 1220mm,915mm-wide 3050mm,6100mm-length Bearing Bar: 38mm Open Area: 50% Approx Weight (With three-core shoots): 19.1kg/m
Plum tube varieties CT32A CT32B +$ 0.60 CT34A$ -1.42 CT42 +$ 0.76 CT45A +$ 2.36 CT45B$ -0.03 CT51 +$ 2.02 CT90B +$ 14.47
38*38*38(mm) Panel size available: 1220*4000, 1220*3660, 1220*2440, 915*3050, 1524*3050, 1524*4000 Bidirectional force. Bearing bar thickness (top/bottom)ï7.0/5.0 Bearing bar centerï30 Open aeraï68% Approx weightï19.5kg
Feature of fiberglass grinding disc: we can made varies of grinding wheel from 4inch to 9inch,our grinding wheel are made by high quality abrasives with strong resin bond and high quality fiber glass net,it is sharp ,durable,they are exported to many countries all over the world and received a good reputation from our customer. 1.material:alum oxide 2.speed:80m/s 3.usage:for metal,steel,inox 4.we can make it green,red and black color,or as your requirement. 5.all of our grinding wheel is checked carefully before packing. 6.it is with very high speed,easy to grinding metal,stone,etc. Advantage: 1. competitive price Near the raw materials region, low labor costs, so lower production cost. 2. Locate in the eastern of China,and close to the port. 3. Advanced technique. 4. More than 10 years production experience. 5. Strict quality testing & inspection,good after-sale service. 6. ISO9001:2000 certificate. 7. Abundant export experience. 8. Accept OEM brand. 9. Small order is accepted. Company Information: The company has been established for several years, the marketing system spread all over the country rely on the domestic leading technology and reliable products.It has the world class technology expert, always pay attention to the domestic and foreign advanced technology and the production technology application, so we can obtain the highest quality product with the lower cost. Packing&Shipping: 1. A container can carry 220,000 pieces 2.A box can carry 500 pieces FAQ: 1.How many nets you have for metal cutting disc we use single and double reinforced nets 2.You are Manufacturer or trading company We are Manufacturer of cutting disc and grinding wheel for many years 3.Do you accept OEM for customers brand Yes, we do, but need MOQ for mass production. If take our brand, less qty with mix sizes are accepted. 4.Do you have inspection procedure before shipping: Yes, we do, 100% QC inspection Before Shipment. 5.What is your payment term Usually TT 30% deposit, and clear the balance before shipping or against copy of B/L. 6.What is your port of shipment Qingdao or lianyungang We are being on service of you within 24 hours,welcome your inquiry any time
Fiberglass stake has the advantage of keeping stock growing straight, with fewer defects. But rigid stakes, like bamboo or metal do not allow flexing. Fiberglass stakes are flexible. Studies show that flexing may increase caliper, trunk strength, enhance root development, and speed growth.
Fiberglass Telescopic Pole -
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
