Material: Fiberglass Material of Radiator: Copper Connector Type: N-male Colour Grey Antenna Height: 26cm Antenna Diameter:2cm Frequency: 868MHz for 915MHz Max Gain: 3dBi(Actual test data) Radiation type: Omnidirectional Polarization: Vertical Nominal Impedance: 50 Ohm Max Input Power: 50W S.W.R.: 2.0
FRP Roof Mount HVAC System Air Conditioner for City Buses Intercity Buses and Coaches Advantages: (1) Providing life cycle along with high efficiency to minimize electrical power; (2) Communicating with vehicle electronics for optimized control and operation; (3) Long life durable to meet environmental condition; (4) Saving time for seasonal maintenance or other service; (5) Friendly to the environment; (6) Providing better comfort for all weather conditions
The material consists of a mixture of fiberglass and resin. The high-quality means that the products will last for years. Perfect for indoor and outdoor Smooth decorative surface Ideal for commercial and residential use Easy to clean with spray/grease Process Technique: Hand lay-up, L-RTM, SMC, etc Technical Strength: 1) Concept Design 2) Material selection 3) Process determination 4) Model processing 5) Mold design 6) Reverse Engineering Main Advantages: 1) light weight and strong 2) corrosion resistant 3) insulation for heat & electric & sound 4) thermal & electric non-conductivity 5) good resistant to low temperature 6) long service life( the service is more than 20 years) 7) water proof&fire proof 8) enviroment friendliness
Alkali-free wax-free glass fiber tape is woven with non-alkali fiberglass yarn.Its characteristics are high heat resistance level,good insulation performance,strong corrosion resistance and so on.It can be used in transformers,motors,electrical appliances,cable filling and banding insulation materials. Main application: Binding motor,transformer,electrical appliances,cable filling material. Specification: Thickness:0.06mm,0.08mm,0.10mm,0.13mm,0.15mm,0.16mm,0.20mm,0.25mm,0.30mm. Width:10mm,15mm,20mm,30mm,50mm,80mm,255mm,etc. Roll length:50m-200m.
Aerogel Blanket Specification HTM Series is a flexible, high-performance, silica aerogel-based insulation material of limited combustibility used for exterior and interior applications. Description: HTM Series is a flexible, high-performance, silica aerogel-based insulation material of limited combustibility used for exterior and interior applications. Supplied in a variety of finishes, the substantial layers of HTM Series meet the requirements for A2 classification (insulation, MgO and plasterboard, and anything you wanted). The product is used to optimize the thermal performance and fire properties of faade systems in a number of ways. These include enhancing the thermal performance of the ventilated faade and addressing thermal bridging in the faade. HTM Series is also useful in minimizing thermal bridges around windows in areas such as window reveals and roller shutter cases.
The machine made FRP sheets that we offer are made from opaque and translucent fiber glass, plastic resin and others. Our range is known for their UV stability, impact resistant and superior finish. Further, the longevity of our range is from 10 to 25 years. Specification: Thickness: 0.8mm,1.2mm,1.5mm,2mm, 2.5 mm, 3 mm, 4mm Colors : Clear, sky blue,light green Profiles : Over 100 general profiles Length : Cut as per customers requirement Density: g/cm 2 1.4 to 1.5 Fiber Content : >25% Light transmission : 60-85% Applicable temperature : 40C to 120C Application areas: Industrial : Warehousing sheds, site cabins, security cabins, shelters, canteens Domestic : Parking sheds, room extensions, toilets, bathrooms, roofing Transportation : Bus station, ticket counters, parcel offices, shelters Agriculture: Farm house, poultry farms,generator rooms, sheds Features: Rust proof High impact strength Fire retardant Light in weight Resistant to all types of weather Free from problems of cracking, wraping and buckling. standard export packing.
The machine made Fiberglass sheets that we offer are made from opaque and translucent fiber glass, plastic resin and others. Our range is known for their UV stability, impact resistant and superior finish. Further, the longevity of our range is from 10 to 25 years. Specification: Thickness: 0.8mm,1.2mm,1.5mm,2mm, 2.5 mm, 3 mm, 4mm Colors : Clear, sky blue,light green Profiles : Over 100 general profiles Length : Cut as per customers requirement Density: g/cm 2 1.4 to 1.5 Fiber Content : >25% Light transmission : 60-85% Applicable temperature : 40 C to 120 C Application areas: Industrial : Warehousing sheds, site cabins, security cabins, shelters, canteens Domestic : Parking sheds, room extensions, toilets, bathrooms, roofing Transportation : Bus station, ticket counters, parcel offices, shelters Agriculture: Farm house, poultry farms,generator rooms, sheds Features: Rust proof High impact strength Fire retardant Light in weight Resistant to all types of weather Free from problems of cracking, wraping and buckling. standard export packing.
The machine made FRP flat panel that we offer are made from opaque and translucent fiber glass, plastic resin and others. Our range is known for their UV stability, impact resistant and superior finish. Further, the longevity of our range is from 10 to 25 years. Specification: Thickness: 0.8mm,1.2mm,1.5mm,2mm, 2.5 mm, 3 mm, 4mm Colors : Clear, sky blue,light green Profiles : Over 100 general profiles Length : Cut as per customers requirement Density: g/cm 2 1.4 to 1.5 Fiber Content : >25% Light transmission : 60-85% Applicable temperature : 40C to 120C Application areas: Industrial : Warehousing sheds, site cabins, security cabins, shelters, canteens Domestic : Parking sheds, room extensions, toilets, bathrooms, roofing Transportation : Bus station, ticket counters, parcel offices, shelters Agriculture: Farm house, poultry farms,generator rooms, sheds Features: Rust proof High impact strength Fire retardant Light in weight Resistant to all types of weather Free from problems of cracking, wraping and buckling. standard export packing.
The machine made FRP sheets that we offer are made from opaque and translucent fiber glass, plastic resin and others. Our range is known for their UV stability, impact resistant and superior finish. Further, the longevity of our range is from 10 to 25 years. Specification: Thickness: 0.8mm,1.2mm,1.5mm,2mm, 2.5 mm, 3 mm, 4mm Colors : Clear, sky blue,light green Profiles : Over 100 general profiles Length : Cut as per customers requirement Density: g/cm 2 1.4 to 1.5 Fiber Content : >25% Light transmission : 60-85% Applicable temperature : 40C to 120C Application areas: Industrial : Warehousing sheds, site cabins, security cabins, shelters, canteens Domestic : Parking sheds, room extensions, toilets, bathrooms, roofing Transportation : Bus station, ticket counters, parcel offices, shelters Agriculture: Farm house, poultry farms,generator rooms, sheds Features: Rust proof High impact strength Fire retardant Light in weight Resistant to all types of weather Free from problems of cracking, wraping and buckling. Standard export packing.
The machine made GRP sheets that we offer are made from opaque and translucent fiber glass, plastic resin and others. Our range is known for their UV stability, impact resistant and superior finish. Further, the longevity of our range is from 10 to 25 years. Specification: Thickness: 0.8mm,1.2mm,1.5mm,2mm, 2.5 mm, 3 mm, 4mm Colors : Clear, sky blue,light green Profiles : Over 100 general profiles Length : Cut as per customers requirement Density: g/cm 2 1.4 to 1.5 Fiber Content : >25% Light transmission : 60-85% Applicable temperature : 40 C to 120 C Application areas: Industrial : Warehousing sheds, site cabins, security cabins, shelters, canteens Domestic : Parking sheds, room extensions, toilets, bathrooms, roofing Transportation : Bus station, ticket counters, parcel offices, shelters Agriculture: Farm house, poultry farms,generator rooms, sheds Features: Rust proof High impact strength Fire retardant Light in weight Resistant to all types of weather Free from problems of cracking, wraping and buckling. standard export packing.
Low dielectric glass fiber DW140 is made of special glass fiber, which has lower dielectric constant and dielectric loss than alkali-free glass fiber, and lower density. The thickness of electronic-grade glass fiber cloth is 0.14mm, and other varieties can also be produced: untwisted yarn, chopped strand, electronic-grade glass fiber yarn. SG Three-phase Dry Type Transformer SG-3KVA 400/20 V headlamp H7R.2 Globe Valve Seals kit 11G4DJ-1055F-14-1 MONITOR JZ-MC-V Thermo meter WTYY-1021 Modun u ra (U52) ADAM-4068 Filter element of Air filter nozzle oil pump SDSGLQ-68T-40 Level Gauge BNA15/16-MG-M900-V60-MRA-3/M/1-ZTSS200(V0.85)MG-AU-VK10-TS-M900/25(KCY-15/16-900/3/10) Low dielectric glass fiber cloth DW140 Card for controller B-A/D U13 Position Sensor of Blade MK4-A-B-800-N angular contact ball bearing 7214 BECBM Analog Signal MBD 201 Rectifier signal instruction card A55 SERVOVALVE HYDRAULIC G771K208 Lamp (Red) APS122DNR VALVE NEEDLE J23W-160P Displacement Sensor (LVDT) TDZ-1E-03 DIFFERENTIAL PRESSURE TRANSMITTE 3051CD2A22A1AI1M5D4Q4DFP9HR5 Power alarm board SDP-PR-3AY BREAKER AUXILIARY SWITCH CONTACTS FK10-II-50 PUMP DOSING S1CBH07065PVT8000UA01080EN Three-phase active power measurmnet transducer TS20-WD-3AS-165A4BN MEDIA CONVERTER EMC-02-RX SENSOR, VIBRATION VELOCITY SDJ-SG-2H Blind-free two-color water meter B69H-32/2-W bladder NXQ-AB-25-31.5-L-Y Adhesive insulation component B J793B HSNH440Q2-46NZ ELECTRO STATIC PRECIPITATOR CONTROLLER EPCS-II Liquid Leakage Detector of Generator YTG-B CELL BASAH BATTERY N 200 - 190H52 SERVO CARD DMSVC005 Oring for pump 7LDTNB-6 Flow equalize board SDP-PR-3N SENSOR MEASURING ZS04 Gaskets TN-9001 Mechanical seal for pump 65AY60 Level Transmitter ABDA6CGJ1+AAZ1 LVDT FOR HP Quick closing Valves HL-3-100-15 cam bien ap luc truoc luoi chan rac MPM426W Low dielectric glass fiber cloth DW140 DF2022-2-12-JERRY
Item: PPS Needle Felt Weight 450GSM, 500GSM, 550GSM, 600GSM or customized. Temperature:170-190 �°C Feature:Our products are flame-retardant, exhibiting excellent performance under wet, acid, alkali and high-temperature environments. Normal Finishing:Singeing, Calendering, Heat set. Application:Its widely used for filtration in coal-fired power plant, waste incineration plants, metal smelting , chemical industry and other low oxidation flue gas dust removal.
High Temperature Fiberglass Woven Tape PTFE coated fiberglass fabric takes high quality imported glass fiber as weaving material. The basic material is weaved specially into senior glass fiber cloth substrate. After unique technology such as full immersion, impregnation, coating the cloth with PTFE, different thickness and width of Teflon cloth is finally produced. PTFE Fabric Description Common thickness: 0.08mm 0.12mm 0.13mm 0.15mm 0.18mm 0.25mm 0.3mm We couls supply at most 1.5mm fabric. Common width: 1 meter or 1.25 meter For other width, customization is available as well. Features of PTFE Fabric: 1. High-temperature resistance(-100 to 550). 2. Non-sticky and easy to clean. 3. Food grade and nontoxic. 4. Heat resistance and fireproof. 5. Resistant to chemical corrosion, strong acid and alkali. 6. Good dimensional stability, high strength, and has good mechanical properties. 7. Low friction coefficient (0.05-0.1), the best choice for oil-free self-lubrication. 8. Light transmittance up to 6% 13 %. 9. High insulation property (the value of dielectric constant is only 2.6, and the value of tangent is less than 0.0025). 10. Anti-static and Ultraviolet-proof. Application of PTFE Fabric: 1. Packaging machines. 2. Bag making machines. 3. Heat print machines. 4. Somewhere else where the heat resistance and non-stick are needed.
Specification HTM Series is a flexible, high-performance, silica aerogel-based insulation material of limited combustibility used for exterior and interior applications. Description: HTM Series is a flexible, high-performance, silica aerogel-based insulation material of limited combustibility used for exterior and interior applications. Supplied in a variety of finishes, the substantial layers of HTM Series meet the requirements for A2 classification (insulation, MgO and plasterboard, and anything you wanted). The product is used to optimize the thermal performance and fire properties of systems in a number of ways. These include enhancing the thermal performance of the ventilated and addressing thermal bridging in the . HTM Series is also useful in minimizing thermal bridges around windows in areas such as window reveals and roller shutter cases.
PTFE Teflon Coated Fiberglass Cloth Without Release Paper Product Description PTFE cloth tapes are produced with either silicone or acrylic pressure sensitive adhesive system. The silicone adhesive coated products have a continuous operating temperature range between while the acrylic adhesive coated products provides high initial tack, enhanced solvent resistance and a continuous service temperature range of The PFTE coating provides optimal release, dimensional stability and outstanding heat resistance. PTFE cloth tapes have low friction and function well as electrical insulation. Bocheng PTFE Glass Cloth Futures: High temperature resistance Surface smooth, non-stick and easy to clean. Fire retardant. Excellent dimensional stability and high strength. High insulation, anti-ultraviolet, anti-static. Resistant to chemical corrosion, strong acid, alkali and various organic solvents. Easy to use, long service life. Common thickness: 0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm Common width for little tapes: 13mm 19mm 25mm 38mm 50mm, with color box, with opp bag For other width, customizaiton is available, but the waste should be taken into considertaion. Color: Brown, Black or White. Application of PTFE Adhesive Tapes High temperature roller coating, heating plate and de-moulding fixture. Food, medicine and plastic bag heat seal. Liner pasting for sliding chute, hopper and aviation mould, can also be applied in the cylinder of slurry machine, thermal plastic & de-moulding, and other industries, which is reusable and easy to replace. Applicable to other surface treatment which need to be resistant to adhesion, corrosion and high temperature. Used in packaging, thermoplastic, composite, heat sealing, electronic and electrical industries.
