Third generation I2C V8i dot matrix flex cable for Phone X to Phone 12 Pro Max,Pad Pro 3/4. Phone face ID flex cable and i2C V8i Face ID programmer. i2c V8i programmer to read and write dot matrix flex cable, and then repair the Phone Face ID higher and lower problems by replacing the flex cable. i2C V8i Programmer Dot Projector Flex Cable For Phone X / XS / XR / XS Max / 11 / 11 Pro / 11 Pro MAX /12/12P/12 PRO MAX/12 MINI/Pad Pro 34 Face ID Not Working Repair. Note: If you are using the old i2c v8 programmer, then you need to change it to i2c v8i programmer so that you can use this dot matrix cable. You can buy a new programmer, or contact us to obtain an IC to upgrade your i2C V8 programmer to i2c V8i programmer.
AC-impedance smaller than1.0m Weight 101020g Maximum Charge Current 3C (Continuous) 4C (50%S0C, 30s) Charging End Voltage 3.65V Maximum Discharge Current 5C(Continuous) 6C (50%S0C, 30s ) Discharge End Voltage 2.0V(1C)
Overall lamp size: l60 w160 h180/l85 w220 h245 Light source type: LED Light source included: no light source included Power / watt: 7W Voltage range: 110-240V Surface treatment: Yellow / Pink / white Material type: glass
Silicon nitride thermocouple protection tube Using pure silicon nitride thermocouple protection tubes, the temperature transmission and induction are more rapid and accurate with its high strength and thin thickness. With excellent oxidation resistance and corrosion resistance, the service life of silicon nitride thermocouple protection tube is more than 5-8 times that of NSIC tubes.At the same time, silicon nitride is not infiltrated with the non-ferrous metal melt and it is not easy to form slags and is easier to maintain
Medical Used Wall Mounted Stainless Steel Sanitizer Dispenser 800ML Automatic Hand Sanitizer Dispenser System has filed a patented invention named Modular Designed Sanitizer Dispenser, which equipped with exchangeable drop, spray & foam nozzle. To save time and labor cost, all parts including the digital controlling box, refill (nozzle and container), backboard and plate could be easily replaced without any tools. Weâ??re concentrated on hand hygiene, the multi-functional dispensers for drop / spray / foam 3 in 1 new system can meet different requirement in cleaning market. Hands-free system stops the spread of germs. Product Details: Model no.: DT 800S Material: 304 Stainless Steel Capacity: 800 ml (max 1000 ml) Function(optional): Drop, Spray Sensor distance: 6-12 cm Droplet(adjustable): 0.6~0.8ml / 1.1~1.2ml / 1.5~1.7 ml Unit size: 13.5 * 12.0 * 26.5 cm Unit weight: 1.28 kg Power: 4 pcs â??Câ?? batteries or AC 110 v ~ 220 v Features: 1. Smart intelligent electronics skill being adopted ensure sits high performance. No contact, to effectively prevent cross-infection of bacteria, prevent human damage & waste. 2. Because of advanced pump fit to all kinds of liquid can be applicable, like shampoo, liquid soap, sanitizer, etc. 3. Power consumption is very low, battery life reaches more than 100,000 cycles. 4. Flashing LED indicates low battery. 5. There is a device for protect from stealing off. 6. Primary application: school, commercial center, health care, institutions, hospitals, office, hotel, food factory & etc. Additional information: Capacity: 1000 ML, 800 ML Dispenser: Disinfectant Dispenser, Gel Dispenser, Lotion Dispenser Dispenser Type: Touch-Free Dispenser Installation Type: Wall Mount Dispenser Main Material: 304 Stainless Steel Operation: Refillable bottle: To fill dispenser, remove the lid and fill with liquid or gel. Disposable bag: To fill dispenser, fill with liquid or gel through the hole which is on the bag, then insert nozzle. Please fill the nozzle completely with liquid or gel (Press the nozzle & make air discharged) before installing the new bag in the dispenser to work, the drop or spray function could be more efficiency. Open front of box to install liquid bag. Pull the valve hose out and down, place the liquid bag in box on top of the control box, place the hose in the channel, make sure the upper collar is beneath the upper notch and the lower collar fits into the lower notch.
Restroom Used Plastic Manual Operated Hand Washing Soap Dispenser Manual Hand Sanitizer Dispenser System is the most economic dispenser solution for hand hygiene, including stainless steel manual soap dispenser & plastic manual soap / sanitizer dispenser. Compare to refillable bottle, the disposable bag system is more recommendable for hygiene market. Product Details: Model no.: ASR1-1D Material: ABS Plastic Capacity: 800 ml Function(optional): Drop, Spray Unit size: 14.0*12.3*20.5 cm Unit weight: 0.37 kgs Thickness: 1.0mm Features: Reliable, economical and environmentally-friendly Suited in kitchens, office buildings, classrooms, families, restaurants, hotels, bathrooms and laundry rooms Additional information: Capacity: 800 ML Dispenser:Gel Dispenser,Lotion Dispenser Dispenser Type: Manual Dispenser Installation Type: Wall Mount Dispenser Main Material: ABS Plastic Installation: Open the upper cover Hold the backplate to the wall and mark the hole positions, then drill for the screws and plugs provided and fit the dispenser to the wall.
Kitchen Mounted 304 Stainless Steel hand Soap Dispenser 1200ML Manual Hand Sanitizer Dispenser System is the most economic dispenser solution for hand hygiene, including stainless steel manual soap dispenser & plastic manual soap / sanitizer dispenser. Compare to refillable bottle, the disposable bag system is more recommendable for hygiene market. Product Details: Model no.: ASR1-3S2 Material: 304 Stainless steel Capacity: 1200 ML Function(optional): Drop, Spray Unit size: 13 * 11 * 21 cm Unit weight: 0.69 kgs Thickness: 0.8mm Features: Satin/polish finish Vertical/horizontal available Reliable, economical and environmentally-friendly Suited in kitchens, office buildings, classrooms, families, restaurants, hotels, bathrooms and laundry rooms Additional information: Capacity: 1200 ML Dispenser:Gel Dispenser,Lotion Dispenser Dispenser Type: Manual Dispenser Installation Type: Wall Mount Dispenser Main Material: 304 Stainless steel Installation: Open the upper cover using the key Hold the backplate to the wall and mark the hole positions, then drill for the screws and plugs provided and fit the dispenser to the wall.
1000 ML 304 Stainless Steel Soap / Detergent Dispenser For Public Hand Hygiene Manual Hand Sanitizer Dispenser System is the most economic dispenser solution for hand hygiene, including stainless steel manual soap dispenser & plastic manual soap / sanitizer dispenser. Compare to refillable bottle, the disposable bag system is more recommendable for hygiene market. Product Details: Model no.: ASR1-3S4 Material: Stainless steel Capacity: 1000 ML Function(optional): Drop, Spray Unit size: 13.3*11.7*21.2 cm Unit weight: 0.72 kgs Thickness: 0.8mm Features: Satin/polish finish Vertical/horizontal available Reliable, economical and environmentally-friendly Suited in kitchens, office buildings, classrooms, families, restaurants, hotels, bathrooms and laundry rooms Additional information: Capacity: 1000 ML Dispenser: Soap Dispenser Dispenser Type: Manual Dispenser Installation Type: Wall Mount Dispenser Main Material: Stainless steel
Medical Standard Elbow Disinfectant Dispenser In 304 / 316 Stainless Steel Product Details: Elbow sanitizer dispenser Diameter of Pipe : 5mm Thickness of Stainless steel cover : 1.2mm Color : Metal Capacity : 1000ml Material : 304 stainless steel Accessories: Refillable bottle cartridge is available Features: Drop and spray functions Wall mounted Primary application: hospitals, health care, institutions, office, hotel, school, shopping mail, coffee bar, food factory etc.
Medical Standard Elbow Disinfectant Dispenser In 304 / 316 Stainless Steel Product Details: Elbow sanitizer dispenser Diameter of Pipe : 5mm Thickness of Stainless steel cover : 1.2mm Color : Metal Capacity : 1000ml Material : 304 stainless steel Accessories: Refillable bottle cartridge is available Features: Drop and spray functions Wall mounted Primary application: hospitals, health care, institutions, office, hotel, school, shopping mail, coffee bar, food factory etc.
800ML Patented Touchless Hospital Hygiene Hand Sanitizer Dispenser DoctorClean® Automatic Hand Sanitizer Dispenser System has filed a patented invention named Modular Designed Sanitizer Dispenser, which equipped with exchangeable drop, spray & foam nozzle. To save time and labor cost, all parts including the digital controlling box, refill (nozzle and container), backboard and plate could be easily replaced without any tools. Were concentrated on hand hygiene, the multi-functional dispensers for drop / spray / foam 3 in 1 new system can meet different requirement in cleaning market. Hands-free system stops the spread of germs. Product Details: Model no.: DT 800 Material: ABS Plastic Capacity: 800 ml (max 1000 ml) Function(optional): Drop, Spray Sensor distance: 6-12 cm Droplet(adjustable): 0.6~0.8ml / 1.1~1.2ml / 1.5~1.7 ml Unit size: 13.5 * 12.0 * 26.5 cm Unit weight: 0.85 kg Power: 4 pcs C batteries or AC 110 v ~ 220 v Battery life: At least 100,000 Dispensing Cycles(DC) Features: 1. Smart intelligent electronics skill being adopted ensure sits high performance. No contact, to effectively prevent cross-infection of bacteria, prevent human damage & waste. 2. Because of advanced pump fit to all kinds of liquid can be applicable, like shampoo, liquid soap, sanitizer, etc. 3. Power consumption is very low, battery life reaches more than 100,000 cycles. 4. Flashing LED indicates low battery. 5. There is a device for protect from stealing off. 6. Primary application: school, commercial center, health care, institutions, hospitals, office, hotel, food factory & etc. Additional information Dispenser Format: Disinfectant Dispenser Dispenser Type: Touch-Free Dispenser Installation Type: Counter Mount Dispenser, Patient Bed Mounted Dispenser, Wall Mount Dispenser Installation: Do not install in areas or direct sunlight, make sure there are not white surface or any other strong reflectors within 30cm below. Mount the dispenser to the wall by using the enclosed screws and wall plugs. Make sure the wall surface is cleaned and in good condition to ensure proper mating of the dispenser to the wall. Install six (6) Alkaline CCell batteries, 1.5V into the battery chamber which is located on the back of control box, replace the control box by sliding down. Must be flush to bottom.
Colorful Multifunctional Auto Sanitizing Dispenser For School Hygiene Automatic Hand Sanitizer Dispenser System has filed a patented invention named Modular Designed Sanitizer Dispenser, which equipped with exchangeable drop, spray & foam nozzle. To save time and labor cost, all parts including the digital controlling box, refill (nozzle and container), backboard and plate could be easily replaced without any tools. We are concentrated on hand hygiene, the multi-functional dispensers for drop / spray / foam 3 in 1 new system can meet different requirement in cleaning market. Hands-free system stops the spread of germs. Product Details: Model no.: DT 1200 Material: ABS Plastic Capacity: 1200 ml Function(optional): Drop, Spray & Foam Sensor distance: 6-12 cm Droplet(adjustable): 1.5 ml / 2.0 ml / 2.5 ml/ 3.5ml (Gel) Unit size: 13.5 * 12.5 * 31.0 cm Unit weight: 0.75 kg Power: 6 pcs â??Câ?? batteries or AC 110 v ~ 220 v Battery life: At least 100,000 Dispensing Cycles(DC) Features: 1. Smart intelligent electronics skill being adopted ensure sits high performance. No contact, to effectively prevent cross-infection of bacteria, prevent human damage & waste. 2. Because of advanced pump fit to all kinds of liquid can be applicable, like shampoo, liquid soap, sanitizer, etc. 3. Power consumption is very low, battery life reaches more than 100,000 cycles. 4. Flashing LED indicates low battery. 5. There is a device for protect from stealing off. 6. Primary application: school, commercial center, health care, institutions, hospitals, office, hotel, food factory & etc. Additional information: Capacity: 1200 ML Color: Blue, Green, Red, Customized Dispenser: Alcohol Spray Dispenser, Disinfectant Dispenser, Gel Dispenser,Lotion Dispenser Dispenser Type: Touch-Free Dispenser Installation Type: Wall Mount Dispenser Main Material: Plastic
Classic And Economic 1000ML Manual Soap / Sanitizer Dispenser Manual Hand Sanitizer Dispenser System is the most economic dispenser solution for hand hygiene, including stainless steel manual soap dispenser & plastic manual soap / sanitizer dispenser. Compare to refillable bottle, the disposable bag system is more recommendable for hygiene market. Product Details: Model no.: DM 1000 Material: ABS Plastic Capacity: 1000 ml Function(optional): Drop, Spray Droplet(adjustable): 1.5 ml / 2.0 ml / 2.5 ml/ 3.5ml (Gel) Unit size: 13.0 * 10.0 * 24.0 cm Unit weight: 0.4 kg Features: 1, Flexible nozzle design at drop & spray options which suits for a variety of liquid or gel soap and disinfectant. 2, Bottle/disposable bag available. 3, There is a device for protecting from stealing off. 4, Primary application: school, health care, institutions, hospitals, office, hotel, shopping mail, coffee bar, food factory etc Additional information Dispenser Format : Alcohol Spray Dispenser, Disinfectant Dispenser, Gel Dispenser, Lotion Dispenser Dispenser Type : Manual Dispenser Installation Type : Counter Mount Dispenser, Wall Mount Dispenser Main Material : Plastic Installation: Do not install in areas or direct sunlight, make sure there are not white surface or any other strong reflectors within 30cm below. Mount the dispenser to the wall by using the enclosed screws and wall plugs. Make sure the wall surface is cleaned and in good condition to ensure proper mating of the dispenser to the wall.
Classic White Rich Foam Distributor / Commercial Soap Dispenser 800ml Manual Hand Sanitizer Dispenser System is the most economic dispenser solution for hand hygiene, including stainless steel manual soap dispenser & plastic manual soap / sanitizer dispenser. Compare to refillable bottle, the disposable bag system is more recommendable for hygiene market. Product Details: Model no.: ASR1-8A Material: ABS Plastic Capacity: 800ml Function(optional): Foam Features: (1) Lockable system (2) Soap saving,sanitary and convenient. (3) Its jethas no any leakage in over 150000 tests.It has a super long service life in reliable. (4) Suitable for dispensing liquid soap,shampoo etc. Additional information: Capacity: 800 ML Color: White Dispenser: Water-free sanitizer foam dispenser, foam soap dispenser Dispenser Type: Manual Dispenser Installation Type: Wall Mount Dispenser Main Material: Plastic
Kitchen Mounted 304 Stainless Steel hand Soap Dispenser 1200ML Manual Hand Sanitizer Dispenser System is the most economic dispenser solution for hand hygiene, including stainless steel manual soap dispenser & plastic manual soap / sanitizer dispenser. Compare to refillable bottle, the disposable bag system is more recommendable for hygiene market. Product Details: Model no.: ASR1-3S2 Material: 304 Stainless steel Capacity: 1200 ML Function(optional): Drop, Spray Unit size: 13 * 11 * 21 cm Unit weight: 0.69 kgs Thickness: 0.8mm Features: Satin/polish finish Vertical/horizontal available Reliable, economical and environmentally-friendly Suited in kitchens, office buildings, classrooms, families, restaurants, hotels, bathrooms and laundry rooms Additional information: Capacity: 1200 ML Dispenser:Gel Dispenser,Lotion Dispenser Dispenser Type: Manual Dispenser Installation Type: Wall Mount Dispenser Main Material: 304 Stainless steel Installation: Open the upper cover using the key Hold the backplate to the wall and mark the hole positions, then drill for the screws and plugs provided and fit the dispenser to the wall.
Medical Standard Elbow Disinfectant Dispenser In 304 / 316 Stainless Steel Product Details: Elbow sanitizer dispenser Diameter of Pipe : 5mm Thickness of Stainless steel cover : 1.2mm Color : Metal Capacity : 1000ml Material : 304 stainless steel Accessories: Refillable bottle cartridge is available Features: Drop and spray functions Wall mounted Primary application: hospitals, health care, institutions, office, hotel, school, shopping mail, coffee bar, food factory etc.
Hospital Wall Mounted Elbow Operated Sanitizer Bottle Holder Elbow Operated Disinfectant Dispenser System is a functional and high-quality dispensing solution. In order to meet the users rising standards, we only manufacture the dispenser shell & cover with durable 304 stainless steel. Long lever / short lever / drop / spray / manual / touch-less all available for your choice. Product Details: Model no.: DM 100S Material: Stainless Steel Capacity: 500 ml Function(optional): Drop & Spray Thickness of Backboard 2 mm Features: Simple design, lower cost with high quality Primary application: school, , institutions, hospitals, office, hotel, shopping mail, coffee bar, food factory etc. Additional information: Dispenser Format : Alcohol Spray Dispenser, Disinfectant Dispenser, Gel Dispenser Dispenser Type : Elbow Dispenser Installation Type : Patient Bed Mounted Dispenser, Wall Mount Dispenser Main Material : Stainless Steel
Sintered Metal Mesh is a wire filtering cloth made by pressing multi-layer stainless steel woven wire cloth, then sintered together in a vacuum furnace. This kind of filtering cloth is much better than common metal woven wire mesh with good strength,hardness and good positioning of opening. Its comprehensive property is superior to sintered metal powder and porcelain.
Titanium woven wire mesh is a kind of products with outstanding corrosion resistance, low density and nontoxic performance. Titanium mesh has become the replacement material of nickel-free stainless steel wire mesh, aluminum wire mesh. Titanium wire mesh has expanded wire mesh and perforated wire mesh types, which can be used for different applications.Titanium woven wire mesh/Titanium Expanded Mesh is a kind of products with outstanding corrosion resistance, low density and nontoxic performance. In the corrosion environment, the surface of high purity titanium mesh will form an oxidation film layer to protect wire mesh from being corroded. The layer is compact and inert, which has strong resistance to the corrosion. It has excellent corrosion resistant performance in below environment: Seawater, wet chlorine, chlorite and hypochlorite solution, nitric acid, chromic acid, metal chlorides and organic salts.
Concrete Reinforced Mesh is widely used as bridge reinforced mesh, road construction mesh, floor reinforced mesh, trench mesh, Concrete slab mesh, Masonry mesh and brick wall reinforced mesh, which is used in construction reinforcement, the ground for the tunnels, bridges, highway and airport, wharf and wall. It is a type of convenient and economical reinforcement option for modern concrete structures. Specification of concrete reinforced mesh: (1)Material:plain steel bar, stainless steel rebar rods. (2)Steel rods style: ribbed or smooth. (3)Rebar Diameter: 3 mm - 40 mm. (4)Mesh shape: square or rectangular . (5)Distance between rods : 50,100, 150, 200,300, 400 mm. (6)Mesh sheet width: from 650 mm to 3800 mm. (7)Mesh sheet length: 850 mm, 6 m, 9 m, 12 m. Features of concrete reinforced mesh: (1)High strength. (2)Anti-crack and anti-shock. (3)Hot-dip galvanized or epoxy coating after the manufactures (4)Anti-corrosion, acid-resisting. (5)Easy to install Applications of concrete reinforced mesh: (1)Concrete reinforced mesh is used as bridge reinforced construction and building, like bridge girders, bridge spans, bridge decks. (2)Concrete reinforcing mesh used in median barriers, tunnel segments, box culverts, airport and wharf. (3)Concrete reinforcing mesh used in residential, industrial and road construction, such as concrete footpaths and industrial and commercial ground slabs, precast panel construction and residential slabs and footings. (4)Constructional uses: block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement. (5)Used as coal mine supporting mesh for coal mine roadway supporting.
