Slide type switch Specifications of Slide type switch: 2pos,3pos,4pos,5pos,6pos,7pos,8pos,9pos,10pos,12pos. MECHANICAL 1.Operation Force: 800g Max 2.Stroke: 2.00mm 3.Operation temp: -20degree~70degree 4.Storage Temp: -40degree to 85degree MATERIALS 1.BASE: Engineering plastics,Black. 2.COVER: Engineering plastics,Red or blue. 3.BUTTON: Engineering plastics,White. 4.TERMINAL: Alloy copper,Gold plating. ELECTRICAL 1.Electrical Life: 2000 operations cycles per switch. 2.Non-Switching Rating: 100mA,50VDC 3.Switching Rating: 25mA,24VDC 4.Contact Resistance: 50mª+ Max,at initial;100mª+ Max,after life test. 5.Insulation Resistance: 100mª+,500VDC 6.Dielectric Serength: 500VCD/1 minute 7.Capacitance: 5pF Max. 8.Circuit: Single pole single throw. SOLDERING AND CLEANING PROCESSES 1.Keep all switch contacts in their "OFF" position for all operation . 2.Wave Soldering: Recommended Solder Temperature at 260degree Max.5 seconds for IC type. 3.Hand Soldering: Use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds,while applying solder. 4.Reflow Soldering: Reflow zone 240degree for 20 seconds.(for SMT type,see the picture) 5.Cleaning Process: Flux clean using force rinse,high agitation or triple bath cleaning mathod. Freon TF or TE give excellent results.When vapor methods are used do not subject the switch to solvents at temperature above 51degree. PACKING Our company manufacturer has developed itself of the designing, production and development of cabling products on logical network. All DIP switches are packed in standard IC tube.
Right-angle type switch Specifications of Right angle type(DS series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,9pos,10pos,12pos. Mechanical 1.Operation Force: 800g Max 2.Stroke: 2.00mm 3.Operation temp: -20degree~70degree 4.Storage Temp: -40degree to 85degree Materials 1.BASE: Engineering plastics,Black. 2.COVER: Engineering plastics,Red or blue. 3.BUTTON: Engineering plastics,White. 4.TERMINAL: Alloy copper,Gold plating. ELECTRICAL 1.Electrical Life: 2000 operations cycles per switch. 2.Non-Switching Rating: 100mA,50VDC 3.Switching Rating: 25mA,24VDC 4.Contact Resistance: 50mª+ Max,at initial;100mª+ Max,after life test. 5.Insulation Resistance: 100mª+,500VDC 6.Dielectric Serength: 500VCD/1 minute 7.Capacitance: 5pF Max. 8.Circuit: Single pole single throw. SOLDERING AND CLEANING PROCESSES 1.Keep all switch contacts in their "OFF" position for all operation . 2.Wave Soldering: Recommended Solder Temperature at 260degree Max.5 seconds for IC type. 3.Hand Soldering: Use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds,while applying solder. 4.Reflow Soldering: Reflow zone 240degree for 20 seconds.(for SMT type,see the picture) 5.Cleaning Process: Flux clean using force rinse,high agitation or triple bath cleaning mathod. Freon TF or TE give excellent results.When vapor methods are used do not subject the switch All DIP switches are packed in standard IC tube.
1. Slide type (DS series): 2pos, 3pos, 4pos, 5pos, 6pos, 7pos, 8pos, 9pos, 10pos, 12pos. 2. Piano type(DP series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,10pos,12pos. 3. Right angle type(DS series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,9pos,10pos,12pos. 4. IC type(DP series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,10pos,12pos. 5. SMT type(SMD series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,10pos,12pos. 6. Rotary type: hexadecimal,decimal,BCD. Packing All DIP switches are packed in standard IC tube. SMT type can be packed in Tape or Reel packing.
The S6022 flow switch use a variety of paddle sizes to respond to fluid flow rates in applications with pipe size greater than 1 inch trade size. These paddle-type flow switches are designed for pipe fluid flow indication. Suitable fluids include water, ethylene glycol solutions and fluid not harmful to brass or phosphor bronze or classified as hazardous fluid. A 3-piece stainless steel paddle kit is included allowing effective installation in variety of pipe size and fluid flow conditions. Single-pole, Double-throw (SPDT) open-low versions of these flow switches are available
Working state: press to lock twist clockwise to release Rated insulation voltage: 380v Conventional heating current: 10a Withstand voltage: 2500v ac one minute Carton package
Key Specifications/Special Features: * Broad Frequency Range: 0.15GHz-23.00GHz * Bandwidth from 8MHz to Full * Low insertion loss, high isolation * Wide temperature range * Commercial, military and space applications * Custom design available upon request. Kete Microwave supplies a series of RF drop-in isolators from 130MHz to 23GHz, the bandwidth from 8MHz to full. These devices are made of magnets and ferrite material. We offer ferrite devices with high quality and stable performance over a long period of time. The devices have a temperature range from -30íµ to +70íµ, high reverse power of RF isolators from 5W to 200W. The delivery time is prompt. All devices are available RoHS Compliant. They are widely used in remote sensing, telemetry, electronic countermeasures, radar and communications etc. 25.4*31.7*6.8.
Used for high-voltage industrial appliances.
Automatic transfer switch
Water level control switch: stainless stel type. Float material&size: sus316l, dia.28*28mm Nut&e-ring material: sus304 Wire lengthú¦ 350mm Standar supplier model ú¦ f131 series Customer can define cable ú¼case length and connector 34*26*16cm, carton, 80pcs
Flow switch 1. - fluid: water and none agressive fluid 2. - max. Working pressure: 10 bar 3. - max. Fluid temperature: 95 c 4. - switch contact rating: 50va 5. - max. Switching current: ac 0, 5a 6. - max. Switching voltage: ac240v 7. - switching flow rate: 1, 7 l/min 8. - housing: none 9. - mounting position: vertical 10. - body material: brass
Membrane switch: thickness of above 0.8mm, pressing life-span is over five houndred thousand times, have the characteristics of the function stabilizes, handle reliably and good tactility feeling. Select different specification of metal dome according to the design and customer request, such as round, triangle, foursquare, rectangle and ellipse.
Waveguide isolator Paper box or to be customized.
High power waveguide circulator Paper box or to be customized.
Sample 7working days Delivery time: 15-20 working days MOQ : 2000 pcs Payment Terms L/C, T/T
Sample 7working days Delivery time: 15-20 working days MOQ : 2000 pcs Payment Terms L/C, T/T
Slide sip switch We offer many kinds of dip switches, such as box type dip switches(ds), piano type dip switches(dp), right-angle type dip switches(da), ic type dip switches(di), smt type dip switches(smd).They are all of superior quality but compititive price. There are a description of them below. Mechanical 1. Operation force :800g max 2. Stroke : 2.00mm(ds, dp, da), 0.90mm(di, smd) 3. Operation temp : -20 to 70 4. Storage temp : -40 to 85 Electrical 1. Electrical life : 2000 operations cycles per switch 24 vdc, 25ma 2. Non-switching rating : 100ma, 50vdc 3. Switching rating : 25ma, 24vdc 4. Contact resistance : (a) 50 m+ max. At initial; (b)100m+max. After life test 5. Insulation resistance : 100m+, 500vdc 6. Dielectric strength : 500vac/1 minute 7. Capacitance :5pf max Materials 1. Base¦engineering plasticsblack 2. Cover¦engineering plasticsblack(di, smd), red or blue(ds, dp, da) 3. Button¦engineering plasticswhite 4. Terminal¦alloy copper gold plating Packing All dip switches are shipped in standard ic tubes with all poles in the "off" position. Delivery As usual, we make delivery in about 3 days after receipt of the payment. Ic tube
1. Electrical ¦t+=8°=( Maximun circuit rating ¦tG+¦F+¦ú¦35v(dc)ú¼100ma, 1w Contact resistance +=¦Ñ¦t+Fú¦10Ω~500 Ω Insulation resistance +°(¦+F+¦ú¦100m Ω 100v Dielectric withstand +T÷OSf±¦ú¦250vrmsú¿50~60hz 1minú¬ Chattering ¦Ñ¦p¦¦¦»O¦+Sú¦ín5ms Life cycle O¦=pO·pnú¦ Flat type µ+pµ=fí²5, 000, 000¦e ; embossing type ¦Ñ+==fí² 1, 000, 000¦e 2. Mechanical +·=¦8°=( Actuation force ¦·+˜±¦ßªú¦µ+pµ=f57~284g(2~10oz), ¦Ñ+==f170~397g(2~10oz) Switch stroke +¬¦°==¦8ú¦µ+pµ=f0.1~0.5mm, ¦Ñ+==f0.6~1.5mm 3. Environment +++¦¦eO² Operation temperature range ¦·+˜eG¦Fú¦-40ºc~+80ºc, Storage temperature range ¦ó¦µeG¦Fú¦-40ºc~+70ºc Humidity O¬ ¦Fú¦40ºc, 90%~95%, 240hú¼ Vibration )± ¦»ú¦20g, max
Three channel car camera video switch Specially used for rear view camera Prior parking, intelligent testing, and automatic switching Turning back to original video screen after parking 3-way video input, 1-way video output Breakeven, no impact on video effectthe best scheme for solving no automatic video switching problems 80g/unit 50unit/carton
Multi-function switch
Thermo switch
