Model 5GF-LDE3. Engine model YS186F(E). Rated frequency 50/60Hz. Rated voltage 380/220V. Rated power 4.2/5.0Kw. Rated speed 3000/3600rpm. Noise leve 78-82dB. Power factor Cosª+=1/0.8. Starting method electric starter. Structure type silent. Packing size 970x570x765mm. Net /Gress weight 173/183Kg. Packing size 970x570x765mm Packed in Woodencases with Container Shipment.
Features Universal AC input / Full range AC input active surge current limiting Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage/Over temperature Built-in constant current limiting circuit Current sharing up to 2 units or 2000W Built-in remote ON-OFF control Built-in remote sense function SpecificationOver Load Protection 115~140% of rate load. Protection type : Constant current limiting, recovers automatically after fau Over voltage protection type : Shunt down o/p voltage, re-power on to recover. Over temperature TSW1: 95?C (Detect on the heatsink of PFC MOSFET) TSW2: 90?C (Detect the winding of output choke) Protection type : Shun down o/p voltage, recovers automatically after temperature goes down Remote control RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off sink current
The equipment takes agricultural and forest waste, such as rice husk, wood chips, coconut fiber dust, saw dust and crop stalks etc as the raw biomass fuel. These biomass fuels will be gasified into rough gas in the Gasifying Furnace, which is our patented product. Then after a series of cleaning and cooling treatment, the purification of the gas will be pure enough to meet the requirement of gas needed by the internal combustion engine to generate electric power. Available biomass fuels: Agriculture and forest residues, such as rice husk, crop stalks coconut fiber dust, palm shell, pruned fruit tree branch, wood chips, chips from timber processing factory and so on. Biomass gas from Fengyus fluidized bed can not only be sent to internal combustion engine for electric power generation but can also be used for household fuel to cooking and heating. It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying Index: Model:LHC-100 LHC-300 Generator rated output power:100-300KW Production volume of biomass gas 2250Nm/3hr Gas temperature of the outlet after cleaning and cooling:under 45 degree celsius Consumption of biomass fuel:0.9-1.8ton/hr(for rice husk) Weight:2.0-3.8ton Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel gasification method, the caoricity of biomass of gasification is normally 1100-1500kcal/Nm3.(4.6-6.3MJ/Nm3) Biomass gas component: CO:17.2% H2:4.05% CH4:6.82% CmHn:1.24% H2S:---- CO2:15.1% O2:0.8% N2:54.7%.
Voltage set-upThe voltage set up when the remnant magnetism greater than 4v 25hz Input power supply Ac 160~260v 50/60hz Max outputDc 5a 95v(when the voltage reaches ac 240v) Frequency compensationBuilt-in low speed protective circuit. RegulationLess than 1%.
Input voltage 190-264v ac Input frequency 50-60 hz nominal Output voltage 73v dc Output current continuous 3.5 a dc. Regulation+/- 1%
Input voltage 70-140vac, (pmg, or auxiliary winding, single, three phases) Reaction is measured 90-480v ac Max output10a 125v dc Protects the functionbuilt-in low-speed , pass and encourage, lam, function Regulation+/-0.5%
As440 is a half wave phase controlled thyristor type avr and forms part of the excitation system for a brushless Generator. The design employs surface mount technology (smt) for high integration of features in a small footprint Avr.
Current : 99t1-a sq48-a Voltage : 99t1-v sq48-v Frequency : 99t1-hz sq48-hz Power : 99t1-kw sq48-kw Power factor : 99t1-cos sq48-cos
Genset Model PBF10GF ENGINE Model F8A (Suzuki) Type In-Line Four-Cylinder, Four-Stroke, Water Cooling, SOHC Bore(mm)í-Stroke(mm) 62í-66 Displacement( L) 0.797 Compression Ratio 8.7:1 Output Power(HP/3600rpm) 28HP Cooling Method Closed Water Cooled Starting Method Electric Starting GENERATOR Rated Frequency 50Hz/3000RPM Output Power Rated Power Output NG 8.8KW 11.0KVA LPG 10KW 12.5KVA PET 10KW 12.5KVA Max Power Output NG 9.7KW 12.0KVA LPG 11KW 14KVA PET 11KW 14KVA Rated Power Factor COSª¦=1.0 COSª¦=0.8 Phase Single Phase Single/ Three-Phase Rated Voltage( V ) 230 230/400 Motor Model 2-Pole, Rotating Field, Automatic Voltage Regulator Driver Model Direct Coupling Frequency Regulation Steady State í_3% Frequency Fixing Time (S) í_3S Steady State Voltage Adjustment Rate í_í+1% Transient Voltage Adjustment Rate í_10% FUEL SYSTEM Fuel PET, LPG, NG Fuel Supply Pressure(kpa) 1.7-2.7kpa Gas Pipeline Length 8m NG 1Inch LPG 1Inch 15m NG 1Inch LPG 5/4Inch 30m NG 5/4Inch LPG 5/4Inch SET Fuel Consumption / Gas Consumption PET5.8L/H, NG:3.8m3/H, LPG:3.3kg/H Noise( dB/7m) 67 Dimension(Lí-Wí-H)(mm) 1150í-720í-860 N.W/G.W(kg) 286/331 Battery Capacity(Ah) 36AH Dimension(Lí-Wí-H)(mm) 1150í-720í-860 N.W/G.W(kg) 286/331
Model HH950A Type Brushless,2-poles,single phase AC Frequency (Hz) 60 50 AC Output Voltage (V) 110;120;110/220;120/240 220;230;115/230 Cont. AC Output (VA) 750 650 Max. AC Output (VA) 950 800 DC Output (V/A) 12 / 8.3 Engine Model HH1E45F Type Single cylinder,Air-cooled,2-stroke; mix 50:1 Starting System Recoil Fuel Tank Capacity (L/gal) 4 / 1.06 Packing Dimensions (mm/in.) 385*320*330 Net Weight (kgs/lbs) 19 / 41.9 Cont.work(h): 6, 7 Operating Noise Level (at7m) : 58dB(A)56dB(A) Packing Dimensions (mm/in.) 385*320*330 Net Weight (kgs/lbs) 19 / 41.9
Description: Model HH1200A Type Brush less, Revolving field type 2-poles generator Voltage Regulate Capacitance AC Frequency (Hz) 60 50 AC Output Voltage (V) 110;120;110/220;120/240 220;230;115/230 Cont. AC Output (VA) 1000 900 Max. AC Output (VA) 1100 1000 DC Output (V/A) 12 / 8.3 Engine Model HH154F Type Single cylinder,Air-cooled,4-stroke OHV Starting System Recoil Fuel Tank Capacity (L/gal) 5.5/ 1.6 Packing Dimensions (mm.) 470x380x390 Net Weight (kgs) 20. Please feel free to contact us. Packing Dimensions (mm.) 470x380x390 Net Weight (kgs) 20.
We offer 2kw gasoline generator set hh3000. Model: hh3000 Type revolving field type 2 poles generator Voltage regulate capacitance & avr Ac frequency (hz) 60 50 Ac output voltage (v) 110;120;110/220;120/240 220;230;115/230 Cont. Ac output (va) 2800 2500 Max. Ac output (va) 2900 2600 Dc output (v/a) 12 / 8.3 Engine model hh168f Type single cylinder, air-cooled, 4-stroke ohv Starting system recoil Fuel tank capacity (l/gal) 15 / 3.96 Packing dimensions (mm/in.) 605x435x450 /23.8x17.1x17.7 Net weight (kg/lb) 45 / 99.2 Please feel free to contact us. Packing dimensions (mm/in.) 605x435x450 /23.8x17.1x17.7 Net weight (kg/lb) 45 / 99.2
Rate power 5kw
Function Measuring Range Accuracy DC Voltage 600V +/-1.0% AC Voltage 450V +/-1.2% AC Current 20-200-400A +/-2.0% Resistance 200KOHM +/-1.0% Diode Test YES Data hold YES Buzzer YES Power Supply (AAA)1.5*2 Max. Display 1999 Dimensions 150*63*28mm Weight 160g Standard Accessories Test Leads, Manual.
Model J0408 DC Voltmeter is suitable for students to measure the voltage in a DC circuit in laboratory. Measuring Range: -1~0~3V -5~0~15V Accuracy: 2.5%f.s. Sensitivity:1mA Dimensions: 138*100*97mm
Function Measuring Range Accuracy DC Voltage 200mV-500V +/-(0.5%+2dgt) AC Voltage 200V-500V +/-(1.2%+10dgt) DC Current 200uA-10A +/-(1%+2dgt) Resistance 200-20MOHM +/-(0.8%+2dgt) Battery Test 1.5V/9V/12V +/-(2.5%+2dgt) Diode Test YES Data Hold YES Low Battery Indication YES Back Light YES Input Impedance 10MOHM LCD Size 48*16mm Power Supply 9V Battery (6F22) Max. Display 1999 Dimensions 130*73.5*35mm Product Net Weight 156g Standard Accessories Test Leads, Battery, Manual
Range:-50_1200 degree celsius Accuracy: +/-3% Low Battery Indication: YES Overload Protection: YES Power Supply: 6F22,9V Max. Display:1999 Dimensions: 105*70*20mm Standard Accessories: Test Leads, Battery, Manual, Thermocouple wire
Sensitivity: (25 cents (USD)) 60mm; (Iron pipe-tube) 120mm Operating current:
Model 5050T/1010T Resistance Meter The Model 5050T/1010T is applicable for measuring insulating resistance of electronic motor cable, voltage transformers, domestic electronic facilities etc. Model Measuring range 5050T 0~500 1010T 0~1000 Dimensions 205*120*145mm
Gantry
