Big starting torque, low noiseip54, ip55insulation grade: frated voltage: 380v, 380v/660vrated frequency: 50hzeuropean ie2 standardmoter seat: 63-355power: 0.18kw-315kw. Wooden case fumigation certificate
Voltage: 24v-48v Efficiency:161,y80% Magaet: 38sh Power: 50w-500w Weight: 3kg Wire: qz-3/155 Specification: 8"-28" Wheel: a356 al Ironcore: DW470. Pcs
Trait: high efficiency, wide platform, high torque, no need maintenance) Voltage: 24v-60v Power: 150w-1500w Specification: 12" -28" Efficiency: y83% Weight: 6.8kg Wheel: a356 al Magaet: 35sh Wire: qz-3/155 Ironcore: dw470 Shaft: 40cr/qr hrc 24-28 Hall ic: honeywell ss41 Temp: 150 Cover: adc12 die casting a1. Pcs
ItemDm6-12035wxDm8-12035wxDm6-12050wxDm8-12050wxM8-12080wx Specification36v/350w48v/350w36v/500w48v/500w48v/800w No-load speed(rpm)30003200340037004000 No-load current (a)11.511.312.512.012.5 Rated voltage (v)3648364848 Rated power (w)350350500500800 Rated speed(rpm)27503000320035003600 Rated torque(n8226m)2.792.793.423.425.1 Rated current (a)12.19.117.41320.8 Eff (%)y80%y80%y80%y80%y80% Reduction ratio66666 Weight (kg)555.55.56.5 Packing quantity (pcs)44444 Packing size (cm)262524262524262524262524262524 ApplicationElderly tricycle, rickshawsmall and medium tricycle Pcs
Voltage (v)Speed (rpm)Rated torque (nm)Locked torque (nm)Locked power(kw)Current(a)Locked current(a)Eff(%)Weight(kg) 360-540750 382 780 60 5110094.341 360-540750 471 950 74 62.913094.444 360-540750 573 1150 90 76.315094.642 360-540750 700 1400 110 93.3 18094.644 380-540750 764 1530 n120 101.620094.745. Pcs
Q2hb34ma is a constant angle and constant torque stepper drive. The drive voltage range from dc12v to 40v. It can match 2-phase hybrid stepper motors whose rated current is under 3a and shaft diameter range from 42mm to 86mm. Owe to bipolar constant chopping circuit, it can make motors low noise, operated smoothly. It is widely used in the small size of numerical control device with higher resolution such as carving machine, laser labeling machine, inner laser curving machine and etc. Features high performance, low price 4 channels constant angel and constant torque subdivision, the highest subdivision: 64 highest response frequency: 200kpps the motor phase current is reduced to approximately 50% of the set current value 100ms after receiving the last pulse edge bipolar constant current chopping circuit opto-isolated input/output driven current is adjustable continuously from 0.5a/phase to 3a/phase single power supply, voltage arrange from dc12 to 40v. Size:136x82x25mm Weight:0.5kg
Vid23 is a precise stepping motor of patent design. It is specially designed with transparent pointer shaft, pointer lumination intensity is superior to tranditional way. It also bring cost reduction in saving number of leds. Vid23 with a gear reduction ratio of 1/180. Its mainly used in dashboard instrumentation or other digital indicator equipments, to transfer digital signals directly and accurately to analog display output. Vid23 is driven by 2 sequent logic pulse signals. It can be driven in 5v ~ 10v providing shaft stepping angle resolution 1/12. The pointer can move with a speed more than 400hz. 1000pcs/ctn, gross weight 10.5kg, 430*314*478mm
The vid69 car clock stepper motor is a precision stepping motor design with a reduced gear ratio 60/1 for minute shaft and 12/1 for hour shaft. The product is mainly used in automotive instrumentation or other equipments to support a clock function. The 6 step gear design is the foundation of the product's high efficiency, high position accuracy and extremely robust gear system. A special gear shape and the unique material choice for each component decrease mechanical friction and noise, with a net result of an enhanced product liability. 420pcs/ctn, 6.4kg, 405*360*365mm
The vid60 car clock motor with zero detection (or say 12 oclock detection) is an upgraded version based on vid69 car clock motor. Zero detection function adopted opto-mechanical system and electronics signal management. An opto-mechanical system detect the physical positioning of clock hands. An electronics signal management, the software, manage the positioning algorithm to synchronize the analog display time to the real time. 420pcs/ctn, 6.4kg, 405*360*365mm
The vid28 double shaft stepper motor is a patented design with a reduction ratio of 180/1. Its innovation is based on the vid29-xx model. The vid 28 can drive two pointers independently. The benefits include a dial space saving opening a window for new concept designs. Applications include dashboards and digital indicator equipment to transfer digital signals to an analog display. 500pcs/ctn, 15.5kg, 430*314*476mm
Vid78 multi-polar stepper motor series designed based on vid new design electromagnetic micro-motor system.(us patent 20080018208. Chinese patent zl2006 20130640.5 and international patent is under application).Characterized in extremely low noise, high torque and high precision are leading by advanced technology for new generation cluster step motor. 1000pcs/ctn, 10.5kg, 430*314*476mm
Gtake brand inverter are good alternative ABB'S ACS550 AND ACS800, the features below: 1.Adopt ti's dsp, and infineon's 4th generation igbt module. 2.Two expansion ports for pg cards for ABZ , UVW, resolver encoder. 3.Thick three-proofing lacquer coated for bad working condition. 4.Main and auxiliary settings and switch over. 5.V/f separated control mode, the output voltage and frequency can be set separately. It's helpful for the variable frequency power supply and torque motor application. 6.Parameter copying(upload and download) function 7.Two sets of motor parameters could be configured, easily run two motor alternately by the control panel. 8. Under vector control with pg, running zero-servo, main axis position control, feed-forward control, pulse serial position control and other position control. 9.Torque control upon the open-loop vector mode and the close-loop vector mode 10.Used for induction motor, servo motor, pmsm and industry particular motor 11.Pg feedback mode: ABZ encoder, uvw encoder, resolver 12.Servo control: main axis orientation control, simple feed forward control, pulse train position control 13.Load distribution function Gk600 technical specifications Rated voltage 3-phase ac380v/ac400v/ac415v/ac440v/ac460v/ac480v Frequency 50hz/60hz, fluctuation range5% Allowable range of voltage Continuous voltage fluctuation 10%, short fluctuation -15%~+10%, i.E. 323v~528v; Voltage out-of-balance rate Cardboard box, plywood carton
Leading electric motors manufacturer in china. Supply ac three-phase induction motors, wound rotor and synchronous motors, capacity from 220kw up to 30, 000kw. Packed in wooden case
Leading electric motors manufacturer in china. Supply ac three-phase induction motors, wound rotor and synchronous motors, capacity from 220kw up to 30, 000kw. Packed in wooden case
Voltage:220-240v Fequency:50/60hz Total high:172.5mm Diameter:150mm. Total high:172.5mm Diameter:150mm Watts:1400w
Landon gear motor series :landon gear motor is composed by one motor and one gear box. It has lower speed and bigger torque than common DC motors. Normally the speed of gear motor is lower than 1000rpm. These gear motors are widely used in home appliance, power tools.Automotive and automatic parts, such as money detector, binding machine, automatic tv rack, packing bank note machine, limelight, tissue machine, office equia, if you need the motor with the speed more than 1000rpm, please refer to our dc motor series. B, if you need a low speed(
Electric motor 1, Good cooling effect 2, High start torque 3, Low start current 4, Low noise and vibration 5, Construction is compact 6, Temperature rise is low 7, Long hours VPI treatment 8, Stator coil is wrapped by 3 layers insulation structure 9, The end of stator coil applied the reshape fixing device to defend the coil deformation. 10, The voltage can be designed to 380,440,415,660,380/660.1140v,3kv,6kv,10kv, 11, Power is ranged from 0.75-10000KW, 12, Frame size is ranged from 80-1000mm 13, The optimal gap match is processed between of the stator and rotor. Wooden cases.
1, Good cooling effect 2, High start torque 3, Low start current 4, Low noise and vibration 5, Constrution is compact 6, Temperature rise is low 7, Long hours VPI treat ment 8, Stator coil is wrapped by 3 insulation layers 9, The end of stator coil applied the reshape fixing device 10, The voltage can be designed to 380,660,380/660.1140v,3kv,6kv,10kv, 11, Power is ranged from 0.25-10000KW, 12, Frame size is ranged from 80-1000 13, The optimal gap match between of the stator and rotor. Wooden cases.
Detailed Product Description Rolling door motor 750kg Input/output Voltage: 220V/24V Rated Power: 240W Advancing Force: 750KG Maximum raising height: 9m Output Torque: 606N.m Output speed: 5.2r/min Chain No.:10A Diameter of roller:129mm Rolling door motor 750kg HL-DC24V Direct Current Rolling Door Motor is the new latest model developed by our company. This product is adapted many patents and techniques, easy installation, reliable operation. This product is suitable for the automatic rolling door, office, shops and hospitals. Functions: 1) Remote control function: up/stop, down/stop, stop/lock, unlock. 2) Manual control function: up/stop, down/stop. 3) Storage power: If the power supply is steady, the motor is driven by AC220V and transferred into DC24V, In the absence of power supply, the storage power can supply power and DC24V rolling door motor can be operated about 20 times. Features: 1) Good design, advanced structure, strong power. 2) Easy installation, Long service life. 3) Low noise, Small power wastage, little vibration. 4) Remote control. 5) Supply reserved power equipment, In the absence of power, the users can also operate the motors. 6) The battery is 4Ah/12. One set packaged in two cartons(mainframe and accessories cartons). About 450 sets for one container.
Typical Applications: Audio and visual equipments--volume drive Outline size:dia 24.4mm,motor body length 18.1mm Shaft diameter 1.5mm Nominal Voltage:1.5V Operating Voltage:1.2-1.8V No-load Speed:2040rpm No-load Current:15mA At Maximum Efficiency: --Speed 1622rpm --Current 58mA --Torque 0.36mN.m/ 3.7g.cm --Output 0.05W Stall Torque--1.75mN.m/ 17.9g.cm Stall Current--226mA The shaft length and the technical&mechanical parameters can be changed per customer's need. SDL's standard package.
