Materials: 45#, 40Cr, 27SiMn, can be produced according to drawings or according to customer requirements. Case: Ningxia Tiandi Run Cow SGZ730/400 scraper conveyer, Zheng Coal machine long wall SGZ730/320 scraper conveyer. Models: Scraper 3TY-05, 2S001-00/6 Directions for use: As the bearing part of coal, fix the scraper on the chain (forming the scraper chain) and use it as the traction component. When the transmission part of the nose starts, it drives the sprocket on the nose shaft to rotate, so that the scraper chain circulates and drives the coal to move along the chute until unloading at the head. The scraper chain runs in a stepless closed loop around the sprocket.
Sprocket assembly is the key transmission part of scraper conveyor, and its running performance has become the condition to improve the performance of scraper conveyor. Sprocket assembly is centralized with oil tank storage thin oil lubrication, lubricating oil for N320 extreme pressure gear oil. The lubricating oil enters the sprocket assembly through the hose of the oil tank, making it more convenient for refueling and extending the service life of the shaft assembly. Among them, sprocket is forged by alloy steel. In order to enhance its strength and extend its service life, it adopts tempering and surface hardening treatment. Generally after being put into use, it is recommended to replace the sprocket installation direction and change its bearing surface to extend its service life when the bearing side tooth surface is badly worn. Check whether the sprocket assembly operates normally, whether there is oil leakage, oil temperature should not exceed 90â??, whether the auxiliary oil tank oil level is insufficient, etc. Let the scraper conveyer operate normally, Henan Shuanzhi welcomes you to inspect.
It was made of aramid ( Kevla) yarn, Can be used in heavy duty load v-belts, agricultural v-belts . It would helping to improve the strength of the belts, lower belt weight, longer the lifetime. And Aramid cord reinforced belts also offer higher resistance to corrosion,heat and flame. Cord Construction:1X3, 2X3,3X3,2X5,4X3,5x3,6X3,6X5, Supply custom-made service as per requirement
HMLS dipped polyester soft cord Dipped polyester cable cord Products Parameter: Linear Density :1100 Dtex Type: HMLS Stiffness Level: Soft, Semi-stiff Additional Overcoating Available: NR,CR,EPDM Cord Construction:1X3, 2X3,3X3,2X5,4X3,5x3,6X3,6X5,9X3,12X3 Supply custom-made service as per requirement Free samples are available Feature : High Performance Fiber Yarn High Strength Low Elongation Low Shrinkage Excellent Adhesion High Fatigue Resistance Match Different Technical Process Application : Automotive V- Belts, Agricultural V-Belts Industrial V-Belts
Dipped Polyester Stiff Cord Products Parameter: Linear Density :1100 Dtex /1670Dtex Type: HMLS / High Tenacity Cord Construction:1X3, 2X3,3X3,2X5,4X3,5x3,6X3,6X5,9X3,12X3 Supply custom-made service as per requirement Feature : High Performance Fiber Yarn High Strength Low Elongation Low Shrinkage Excellent Adhesion High Fatigue Resistance Match Different Technical Process Application : Automotive V- Belts, Agricultural V-Belts Industrial V-Belts www.persentrade.com www.polyestercord.com Luna +86 137 5451 0798
Applications The machine is suitable for vulcanizing Ordinary rubber conveyor belt, Nylon conveyor belt, PVG conveyor belt, flame retardant conveyor belt, Steel cord conveyor belt etc. Salient Features High Quality Material Material of steel plate: High quality carbon steel Q355B, Guaranteed Performance Material, each steel plate has the same stable performance. After hot blasting, smooth, it is stronger than common steel. Excellent Sealing Performance The double-sealing ring and the dust-proof ring structure can guarantee a long lifetime. Stronger Plunger The material of plunger is Chilled Alloy Cast Iron, after polishing, grinding treatment and resist compression test, make the surface smooth, and anti-abrasion.
About SPD Rollers: The SPD range of conveyor rollers includes both steel and HDPE carry and return rollers. Also available are rubber disc impact and return rollers. The rollers and frames are manufactured to different standards or design according to your special working condition requirements with some innovative and maintenance saving designs. Our rollers are fitted with quality deep ball ZZ C3 bearings for maximum life. Belt Widths of our SPD rollers range from 400-2000. Larger sizes available on request. Roller lifespan could be assured� 30,000 to 50,000 hours under normal working condition and maintenance.
About SPD Rollers: The SPD range of conveyor rollers includes both steel and HDPE carry and return rollers. Also available are rubber disc impact and return rollers. The rollers and frames are manufactured to different standards or design according to your special working condition requirements with some innovative and maintenance saving designs. Our rollers are fitted with quality deep ball ZZ C3 bearings for maximum life. Belt Widths of our SPD rollers range from 400-2000. Larger sizes available on request. Roller lifespan could be assured 30,000 to 50,000 hours under normal working condition and maintenance.
The Belt conveyor is highly custom-designed for different conditions. It can be used for bag transportation as well as grains and seeds. The belt materials can be rought rubber, food-grade belt The belt can also be covered for outside usage.
Description: Casing Scraper is ideal for the removal of mud, cement, bullets, rust, scale, paraffin, perforation burrs and other obstructions from the inside walls of casing. Maintaining a clean casing I.D. is important when operating drilling, fishing, or wireline tools.
Steel Cord Conveyor Belt The belt core, comprised of longitudinally and evenly arranged non-spinning galvanized wire ropes and high adhesive core rubber with the upper side and lower side covered with rubber layer. Widely used in coal, mine, port, metallurgy, electric power, chemical industry for high strength, long distance and heavy load materials conveying. According to cover character, steel cord belt include normal grade use, flame resistant, cold resistant, abrasion resistant, heat resistant, acid-alkali resistant, oil resistant, etc. High tensile strength, long service life, short elongation under service, groove formation property and good anti-flexure property, suitable for conveying materials across long distance, with large volume and high speed.
Why You Need A Self-aligning Carrying Idlers? Conveyor belt is the most expensive part of a conveyor system, Making sure the belt is fully functional and not damaged is very important. Associated with the conveying of bulk materials, a misaligned conveyor belt may cause many potential risks and problems, include but not limited to material spillage, shorter life of conveyor belt and conveyor structures. Our self-aliging carrying idlers can keep your conveyor belt stay on the correct tracks, greatly reduced the possibility of a sever damage to belts.
High Density Polyethylene (HDPE) Roller HDPE is a high density polyethylene, which is an environmental chemical that composed of carbon and hydrogen, only carbon dioxide and hydrogen oxide are produced after burned. It wont contain and toxic substances and heavy metals and will not cause any pollution to the environment.
Maximum Noise Absorption, Wear Resistant, and Friendly to Belt Impact roller is installed below the drop material section of the conveyor to reduce the impact of the falling material on the conveyor belt to extend the service life of the conveyor belt. BuMtesD impact roller is specially suitable for mining application, which is an effective way to reduce a sudden and large load capacity, friendly to the rollers under the impacting zone.
The conveyor belt is a rubber, fiber and metal composite products or plastic and fabric composite products used for carrying and transferring materials in belt conveyor. The conveyor belt is widely used in concrete, coking, metallurgy, chemical, steel, power, coal mine, terminal ports and other industries. Classified as per structure materials: common cotton canvas conveyor belt, nylon conveyor belt, steel cord conveyor belt, PVC solid woven conveyor belt, PVG solid woven conveyor belt, corrugated sidewall conveyor belt, etc.
Brief description The equipment has the characteristics of low speed, high conveying efficiency, step-less speed regulation, low energy consumption and so on. It can ensure that the material is conveyed to paste pump at a certain pressure. Application This equipment is based on a bi-axial spiral rectangular structure and is widely used in the treatment of paste materials such as slime, sludge, calcium carbide sludge, printing and dyeing sludge, etc. It is a part of the paste material pumping system. After stirring and conveying, the materials are conveyed to the KOS series paste pump through the bottom discharge port under the stirring of the twin-shaft coupled spiral blades. Effectively solve the problems of material compaction and uneven mixing. It greatly improves the transfer efficiency of paste and viscous materials, and reduces the unit time cost.
Parameter 1.Model:MTW/MTT/MTP/MTS/MTI/MTM/MTH 2.Drive method:independent stepper motor 3.Lifting method:electromagnetic lifting method 4.Pressure adjustment:spring adjustment 5.Lifting height:small and equal 30mm non-working state(small and equal 30mm working state) 6.Support maximum speed:6000rmp/min 7.Voltage/power:110-240/150w 8.Applicable models:sigle and double sewing machine, herringbone machine,stretch sewing machine,synochronous machine,burried machine,overlock sewing machine(limited to MTH) Product advantage 1.The combination of digital puller and conveyor belt, the efficiency is increased by more than 300% compared with traditional sewing machine 2.Synchronous digital puller with automatic conveyor belt with sewing machine,can automatically rewind,improve the edge efficiency and ensure the quality of the hemming 3.Workers are easy to operate,fast-handed,and solve the difficulties of factory recruitment problems 4.Standard servo motor and drive, automation conveyor belt transmission force,accurate data transmission 5.Professional-grade autonous control system,an electronically controlled direct-synchronized drag tug and conveyor belt, stable and reliable
Technical parameters Model Baiting power (kw) Shoving power (kw) Feeding diameter (mm) Baiting quantity (kg/h) Case content (kg) Case dimension (mm) Weight (kg) DTC-600 0.75 0.75 76 600 80 650x650x800 80 DTC-1000 1.5 0.75 102 1000-3000 150 900x850x860 150 DTC-2000 1.5 0.75 120 2000 200 1200x800x800 200 DTC-3000 1.5 0.75 140 3000 250 1600x800x800 300
Conveying the finished-packet up. Equip with packaging equipments. Speed (adjustable) 25m/min Height of the lowest point 60mm Loading height(vertical) 850mm Belt Width 250mm Belt Length 1470mm Power AC 220V 60W Package Size 1560x430x350mm 1100x420x800mm Weight 62kg
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Roller covers series products include: a. PBO KEVLAR Felt Roller Covers Temperature resistance: continual 550, peaking at 650 Minimal diameter:33-230mm Length: Any length Thickness: 5-12mm b. KEVLAR roller covers Temperature resistance: continual 480, peaking at 550 Minimal diameter:33-230mm Length: Any length Thickness: 5-12mm c. NOMEX roller covers Temperature resistance: continual 280, peaking at 370 Minimal diameter: 33-230mm Length: Any length Thickness: 5-12mm d. POLYESTER Temperature resistance: continual 180, peaking at 260 Minimal diameter: 33-230mm Length: Any length Thickness: 5-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
