1.Heat resistant conveyor belt characteristics: Heat resistance conveyor belt consists of multi-layer cotton canvas (cotton cloth) or polyester canvas covering high-temperature resistant or heat-resistant rubber, bonded through high temperature vulcanization, suitable for transporting hot coke, cement, slag and hot castings with the temperature less than 175â??. 2.Heat resistant conveyor belt application: Mainly used in industries such as metallurgy, construction, etc. For transporting sintered ore, coke, cement clinker and other high-temperature materials, the material temperature does not exceed 800â??, the belt temperature does not exceed 175â??. According to the manifestation of the heat resistant belt breakage until to lose transportation ability and the heat resistant grading, we use edpm or sbr as the covering layer rubber, and high modulus low shrinkage polyester or cotton canvas as the strong layer. It can use the heat resistant woven glass fabric between the cover rubber and the layers, so as to improve the working life of the heat resistant conveyor belt. We can make it into endless conveyor belt as per clients requirement. 3.The physical properties of heat resistant conveyor belts Physical properties of the resistance to the tropical covering Projects Type T1 T2 T3 T4 Allowable variation range Hardness Difference between after aging and before aging(irhd) +20 +20 ±20 ±20 Maximum value after aging(irhd) 85 85 85 85 Tensile strength Rate of performance change/% -25 -30 -40 -40 Minimum value after aging/mpa 12 10 5 5 Elongation at break Rate of change after aging/% -50 -50 -55 -55 Minimum value after aging/% 200 200 180 180 Note: t1--the testing temperature
Casing Scraper is ideal for the removal of dirt which may be left over the inside walls of casing, such as solid cement, hard wax, various salt crystals or deposits, perforation burrs, iron oxide residues resulted from rusting, so as to make all down hole tools pass through unblocked. Especially when a small circular clearance is available between the down hole tools and casing inside diameter, the complete scrapping becomes more necessary before further working. At present in the large petroleum well scrapping in the internal wall of casing by use of casing scraper is a necessary step.
Casing Scraper is ideal for the removal of dirt which may be left over the inside walls of casing, such as solid cement, hard wax, various salt crystals or deposits, perforation burrs, iron oxide residues resulted from rusting, so as to make all down hole tools pass through unblocked. Especially when a small circular clearance is available between the down hole tools and casing inside diameter, the complete scrapping becomes more necessary before further working. At present in the large petroleum well scrapping in the internal wall of casing by use of casing scraper is a necessary step.
Casing Scraper is ideal for the removal of dirt which may be left over the inside walls of casing, such as solid cement, hard wax, various salt crystals or deposits, perforation burrs, iron oxide residues resulted from rusting, so as to make all down hole tools pass through unblocked. Especially when a small circular clearance is available between the down hole tools and casing inside diameter, the complete scrapping becomes more necessary before further working. At present in the large petroleum well scrapping in the internal wall of casing by use of casing scraper is a necessary step.
Our High Temperature Felt Conveyor Belt are specially designed for aluminum profile production plants and are used in conveyor belts for belt-shaped belts. Our felt is available in 4 materials: PBO, Kevlar, Nomex, Polyester, which can withstand different operating temperatures: 600, 500, 280, 180, which could meet the needs of the entire production process. Overall seamless design better protects the aluminum profile from scratching and greatly improves the aesthetics of the product.
Name PP conveyor belt Color White or as required Material PP or HDPE Length According to the customer Width 1000-2500mm Thickness 1.0mm or 1.2mm Usage Matching for poultry cages equipment Feature Can work in -50 degree, etc Report CNAS/CMA, etc Package By roll as required ABOUT KAXITE® TECHNOLOGY Jiangyin Kaxite Energy-saving Materials Technology Co., Ltd (abb.: KAXITE TECHNOLOGY, KXT-TECH) was originally a family business, developing since 2001, now acting as a group, who has her own two divisions, Plastics Extrusion Division, Non-woven Division, and some high-tech cooperation projects, which supported by Nanjing University Of Science and Technology, Jiangyin Technology Bureau, Guangdong Nonferrous Metal Research Institute... It is developing so fast and there're more than 150 employees in the group, with 2 factories, 3 offices, and 1 cooperated factory, 2 cooperated laboratories, all are located in China. The plastic division is specialized in energy-saving plastic products, owns over 42 extrusion lines, as well as granulation capacity of 9,855 tons per year, for products made of PA(polyamide),PP(polypropylene),PE(polyethylene)conveyor belt (matching for poultry cages equipment),geomembrane, geotextile and other types of waterproofing materials. We can produce conveyor belt, all kinds of waterprooft material and 15 million square meters of geomembrane, 5 million square meters of geotextile per year. We mainly produce PP ,PE conveyor belt(matching for poultry cages equipment).The conveyor belt we made is usually glossy white, thickness of 1.0mm to 1.2mm. Length, width can be produced according to customer requires, the max width is 2500mm.We can also made interior smooth type, grinding sand type, or customization. We have three conveyor belt production lines, every month we can produce 500 tons. In March 2016,every production line was equipped with the automatic scanning thickness gauge system, the measurement accuracy of 0.01 millimeter, check point is adjustable according to the product width, full width detection at least 30 points, to ensure the product smooth. Our company provides a reliable product quality,excellent service, good prestige. We have adhere to the business philosophy:We strive for quality, innovation and prestige in our products, to the credibility and development,to provide satisfactory services to our clients.
100% Nomex Endless Blanket Product Description Items:Nomex conveyor belt,Nomex calender transfer printing endless belt. Temperature resistance:continues:180°C, speaks: 280°C.The material will lose weight ,and reduce its self life if it is exposed to high temperature(about 350°C) for a period of time (longer than10 minutes) Total thickness Scope :6-10mm;common specifications are 6mm,8mm,10mm, Width Scope :600mm-3500mm;common specifications are 1000mm, 1980mm, 2000mm Length:1,800mm~30,000mm Density Effective blankets part of the standard is 2800g/m2-3600g/m2 ;Standard or special requirements can be customized.
100% Nomex conveyor belt for Ironing machine Product Description Items:Nomex conveyor belt,Nomex calender transfer printing endless belt,Nomex Iroing Machine. Temperature resistance:continues:180°C, speaks: 280°C.The material will lose weight ,and reduce its self life if it is exposed to high temperature(about 350°C) for a period of time (longer than10 minutes) Total thickness Scope :1.6-10mm;common specifications are 2mm,3mm,4mm(customized) Width Scope :10mm-2000mm;common specifications are 150mm, 200mm, 300mm (customized) Length:1,800mm~30,000mm(customized) Density Effective blankets part of the standard is 500g/m2-2000g/m2 ;Standard or special requirements can be customized.
100% Nomex Seamless Conveyor Belt Product Description Temperature resistance:continuous 200C, speaks: 300C.The material will lose weight turn brown ,and reduce its self life if it is exposed to high temperature aluminum profile(about 400°C) for a period of time (longer than10 minutes)Kevlar is thermo setting material and therefore,it will not pollute the aluminum profile. Total thickness range:1.5-15mm;common specifications are 6mm,8mm,10mm,12mm Width range:20mm-3,600mm;common specifications are 60mm, 70mm, 75mm, 80mm, 90mm, 100mm Length:1,800mm~30,000mm Density Effective blankets part of the standard is 350g/�mm;Standard special requirements can be customized (maximum 500g/m2.mm) Quick Details: Material Feature:Heat Resistant Structure:Belt Conveyor Brand Name:Oubo Model Number:Belt-N Color:Off-White/Beige/Cream Dimension:Customized Size Material:100% Polyester Technique:Needle Punch or Knitted
100% Polyester Seamless Conveyor Belt Product Description Temperature resistance:continuous 150C, speaks: 180C.The material will lose weight turn brown ,and reduce its self life if it is exposed to high temperature aluminum profile(about 280C) for a period of time (longer than10 minutes)Polyester is thermo setting material and therefore,it will not pollute the aluminum profile. Total thickness range:1.5-15mm;common specifications are 6mm,8mm,10mm,12mm Width range:20mm-3,600mm;common specifications are 60mm, 70mm, 75mm, 80mm, 90mm, 100mm Length:1,800mm~30,000mm Density Effective blankets part of the standard is 350g/â?¢mm;Standard special requirements can be customized (maximum 500g/m2.mm) Quick Details: Material Feature:Heat Resistant Temperature:180C Brand Name:Oubo Model Number:Belt-PE Color:White Dimension:Customized Size Technique:Needle Punch or Knit Application:Aluminum Industry AT91SAM7S128 Chip Decryption
100%Nomex Felt Pad for Storage Rack Product Description Color: off white Use for: The basket in the aging oven. Working Temp: 250 Degree-280 Degree Thickness:4mm,6mm, 8mm,10mm Size: depend on the basket Quick Details: Color:Off-white/Beige/Cream Techniques:Needle Punch/Knitted Brand Name:Oubo Feature:Treated for both sides, flat surface Application:Aging Oven Material:100% Nomex
High Temperature & Wear Resistant Pads for Aluminum Extrusion Handing Systems Product Description Thickness:6-12mm Length:0mm-10000mm Width:0-1500mm Kevlar Felt can resist instant 480C ,long time working in high temperature conditions ( 280C ~480C) ,100% Aramid (Dupont Fiber) fiber to get Kevlar Felt ,will not melt and pollute sections Aluminum ,felt will be in weightlessness, will take calorific conduction and save production cost . Quick Details: Condition:New Material Feature:Heat Resistant Raw Material:100% Kevlar or 80% Kevlar + 20% Carbon Brand Name:Oubo Application:Aluminium Industry Thickness:5-12mm Technique:Needle Punched Model Number:Pad-K Dimension:Customized Size Style:Plain and smooth
100% kevlar Endless Needle Punched Felt Belt Product Description Temperature resistance:continuous 250C, speaks: 500C.The material will lose weight turn brown ,and reduce its self life if it is exposed to high temperature aluminum profile(about 600C) for a period of time (longer than10 minutes)Kevlar is thermo setting material and therefore,it will not pollute the aluminum profile. Total thickness range:1.5-15mm;common specifications are 6mm,8mm,10mm,12mm Width range:20mm-3,600mm;common specifications are 60mm, 70mm, 75mm, 80mm, 90mm, 100mm Length:1,800mm~30,000mm Density Effective blankets part of the standard is 350g/â?¢mm;Standard special requirements can be customized (maximum 500g/m2.mm)
Item: kevlar roller sleeve, kevlar roller, kevlar tube. Material : 100% kevlar Color: yellow or green Temperature: 200â°c continous use and 500â°c peak time. Thickness : 5-12mm of normal dimension 6mm, 8mm, 10mm. Inner dia: 50mm, 60mm, 72mm, 76mm, 77mm, 96mm, 100mm, 110mm, 115mm, 150mm. And the other roller inner dia between 50mm to 150mm is possible. Length : 100-2500mm of normal demesion 400mm, 450mm, 500mm, 600mm. Overview Quick details Place of origin: guangdong, china (mainland) brand name:oubo Model number:roller-k color:yellow or green Temperature:500 degree application:aluminum industry Technique:needle punched type:roller Dimension:customized size order:make to order Material:100% kevlar advantage:heat resistant Packing method:carton box Packaging & delivery Packaging details Packing method:carton box packing Carton size: 72*40*40cm, 63*35*30 cm, 80*50*60 cm Delivery time 5-7 working days
Item name: pbo felt roller Color:brown(outside)+yellow(inside) Usage:initial table before interrupt saw and forepart of run-out table after interrupt saw Related information: Length:100mm ~ 2500mm Inside diameter:45mm, 50mm, 60mm, 72mm, 76mm, 77mm, 96mm, 100mm, 110mm, 115mm, 150mm. Total thickness:5mm-12mm Pbo thickness:2mm-5mm
Temperature resistance:continuous:350°c, speaks: 600°c.The material will lose weight turn brown , and reduce its self life if it is exposed to high temperature aluminum profile(about 700°c) for a period of time (longer than10 minutes)pbo and kevlar are thermo setting material and therefore, it will not pollute the aluminum profile. Total thickness range:1.5-15mm;common specifications are 6mm, 8mm, 10mm, 12mm Width range:20mm-3, 600mm;common specifications are 60mm, 70mm, 75mm, 80mm, 90mm, 100mm Length:1, 800mm~30, 000mm Density effective blankets part of the standard is 350g/?¢mm;standard special requirements can be customized (maximum 500g/m2.Mm) Quick details Type: seamless belt material:30% pbo + 70% kevlar, pbo Application:aluminum industry feature:heat resistance and flat Brand:oubo
Feature: Layers of specially designed fabric plies are sandwiched between rubber skim coats for adhesion and load support. Top and bottom cover compounds are added for maximum protection of the Conveyor belt carcass. Conveyor Belts can be manufactured according to various international fabric standards, at different rating and wide variety of cover grades. Applications: Conveyor Belt applications involve in all kind of industries such as mines, power plants, construction, ports, chemical industries. Standards: Conveyor Belt can be manufactured following various fabric standards: Feature: Layers of specially designed fabric plies are sandwiched between rubber skim coats for adhesion and load support. Top and bottom cover compounds are added for maximum protection of the Conveyor belt carcass. Conveyor Belts can be manufactured according to various international fabric standards, at different rating and wide variety of cover grades. Applications: Conveyor Belt applications involve in all kind of industries such as mines, power plants, construction, ports, chemical industries. Standards: Conveyor Belt can be manufactured following various fabric standards: GB/T7984, GB/T10822, HG3714, HG3782, DIN2210, AS1332, JISK6322
buig fychbfgh
Industrial modular conveyor system China huihao aluminum (dalian) co., ltd. Is an aluminum profiles system manufacturer in china. The factory covers area of 30000 square meters and has 200 employees in total including 30 technicians and 15 senior engineers, 90% of the employees are skilled workers. We specializes in manufacturing aluminum profiles system, aluminium extrusion profile, customize molds and manufacture non-standard aluminum section products according to requirements of the customers. Combined with outstanding productivity and service, our customers enjoy a significant market advantage. Main products/service: aluminum profiles system china, aluminum profiles china, aluminium extrusion profile china, aluminum profile processing, non-standard aluminium section.
The general fabric conveyor belt is made of EP or NN and finished through the processes of mixing, calendaring, firming and vulcanizing. 1. EP Conveyor belt; High modulus, low elongation, impact resistant, excellent heat resistant, available for the materials handling of heavy duty, high speed and medium distance. 2. Nylon Conveyor belt: Flexible, high tension, impact resistant, low elongation, available for the materials handling of heavy duty, high speed and medium distance.  Specification of fabric belt Belt Type Fabric Type Single Fabric Strength(N/mm) Single Fabric Thickness(mm) Cover Thickness (mm) Ply Width Range Length(m)/Roll Top Rubber Bottom Rubber NN Belt NN100 100 0.7 3 1.5 2-10 300-2800 20-400 NN125 125 0.7 NN150 150 0.75 NN200 200 0.9 NN250 250 1.15 NN300 300 1.25 NN400 400 1.5 EP Belt EP100 100 0.75 4.5 3 2-8 300-2800 20-400 EP125 125 0.75 EP150 150 0.85 EP175 175 0.85 EP200 200 1 EP250 250 1.2 EP300 300 1.35 EP350 350 1.5 EP400 400 1.65 EP500 500 2  Fabric Conveyor Belts are named according to different cover grade: Normal Standard, Oil resistant, Acid resistant, Heat resistant, High temperature resistant, Flame resistant, Cold resistant and Abrasion resistant, etc. They are widely used in mining, harbour, coal, metallurgy chemical etc. Please contact me if you need
