Features Up to 11.3Gb/s data links DWDM EML transmitter and APD receiver 50 GHz ITU channel spacing with integrated wavelength locker Up to 80km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~+70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC Applications 10GBASE-ZR/ZW & 10G Ethernet SDH STM64 Other Optical Links
Features Up to 11.1Gb/s data rate 1270nm DFB laser and PIN receiver for HXSX-AL6843x 1330nm DFB laser and PIN receiver for HXSX-AL8643x 2-wire interface with integrated Digital Diagnostic monitoring Up to 40km transmission on SMF BIDI LC optical connector Single +3.3V power supply Metal enclosure, for lower EMI Maximum power consumption 1.5W RoHS-6 compliant and lead-free SFF-8472 MSA compliant &SFF-8431 Operating case temperature Commercial: 0 ~ 70oC Applications Back to Back 10GBASE-ER/EW 10G Ethernet
Features Up to 11.1Gb/s data rate 1270nm DFB laser and PIN receiver for HTSX-B273396Lx 1330nm DFB laser and PIN receiver for HTSX-B332796Lx 2-wire interface with integrated Digital Diagnostic monitoring Up to 10km transmission on SMF BIDI LC optical connector Single +3.3V power supply Metal enclosure, for lower EMI Maximum power consumption 1.5W RoHS-6 compliant and lead-free SFF-8472 MSA compliant &SFF-8431 Operating case temperature Commercial: 0 ~ 70oC Applications Back to Back 10GBASE-LR/LW 10G Ethernet
Features Up to 11.1Gb/s data rate 1490nm DFB laser and APD receiver for HTSX-B495596Zx 1550nm DFB laser and APD receiver for HTSX-B554996Zx 2-wire interface with integrated Digital Diagnostic monitoring Up to 80km transmission on SMF BIDI LC optical connector Single +3.3V power supply Metal enclosure, for lower EMI Maximum power consumption 1.8W RoHS-6 compliant and lead-free SFF-8472 MSA compliant &SFF-8431 Operating case temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC Applications Back to Back 10GBASE-ZR/ZW 10G Ethernet
Features Up to 11.3Gb/s data links 1310nm DFB transmitter and PIN receiver with CDR supported 9.95 to 11.3Gb/s reference-free Up to 10km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC Applications 10GBASE-LR/LW & 10G Ethernet SDH STM64 Other Optical Links
Up to 11.3Gb/s data links CWDM EML transmitter and APD receiver Up to 80km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC
Up to 11.3Gb/s data links CWDM EML transmitter and APD receiver Up to 80km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC
Features Up to 11.3Gb/s data links DWDM EML transmitter and PIN receiver 100 GHz ITU channel spacing with integrated wavelength locker Up to 40km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70 oC Extended: -10 ~ +80 oC Industrial: -40 ~ +85 oC Applications 10GBASE-ER/EW & 10G Ethernet SDH STM64 Other Optical Links
Features Up to 11.3Gb/s data links DWDM EML transmitter and APD receiver 100 GHz ITU channel spacing with integrated wavelength locker Up to 80km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70 oC Extended: -10 ~ +80 oC Applications 10GBASE-ZR/ZW & 10G Ethernet SDH STM64 Other Optical Links
Features Up to 11.1Gb/s data rate 1270nm DFB laser and APD receiver for HTSX-B273396Kx 1330nm DFB laser and APD receiver for HTSX-B332796Kx 2-wire interface with integrated Digital Diagnostic monitoring Up to 60km transmission on SMF BIDI LC optical connector Single +3.3V power supply Metal enclosure, for lower EMI Maximum power consumption 1.5W RoHS-6 compliant and lead-free SFF-8472 MSA compliant &SFF-8431 Operating case temperature Commercial: 0 ~ 70oC Applications Back to Back 10GBASE-ER/EW 10G Ethernet
Product type: ts-1157 Category: touch switch Height from mounting surface (mm): h + .. Dimensions: w6.2xd6.2xh Welding method: reflow soldering Installation: chip type Operation intensity: a: 100 b: 180 c: 260 Operation: vertical vertical Packing: a: bag b: package Life: d1: 10 million times Waterproof: Type of travel: 0.15 � 0.05mm
RFID contactless card is a plastic or paper card which is embedded with a microchip and antenna inside. RFID card is widely applied as access control card, employee ID card, hotel key card, parking card, etc. We can offer you both blank cards and cards with artwork printing. Dual frequency RFID card is also available on request. Besides, Vando provides programming and encoding services which exactly fit customerâ??s programming or encoding requirements. We will offer you various RFID products with super quality, cost-effective price and fast delivery. Available Chip Type: - 125KHZ Chip: EM4100, EM4200, EM4102, TK4100, GK4001, EM4305, EM4550, T5577, HITAG 1, HITAG 2, HITAG S 2048, etc. - 13.56MHz Chip: Mifare 1K S50, Mifare 4K S70, F08, Mifare 1k/4k compatible, Mifare MINI S20, Mifare Ultralight, Mifare Ultralight C, I CODE SLI, Mifare Desfire 4k, LEGIC MIM256, TI2048, Mifare Plus 2K, Ntag213, Ntag215, Ntag216, etc. - 860-960Mhz Chip: Alien H3, Monza R6, etc.
Fiberall mini car diagnostic scanner is with standard 16pin obd-ii (obd2) interface. It is compatible for obd-ii complaint vehicles and bluetooth diagnostic software. The interface sends data to your android/iOS mobile phone or windows laptop quickly and you are able to get the trouble code and know the problem of the vehicle in real time. Application: Cars, vehicles, autos, trucks, vans & more. Scan vehicle computer and check engine ecu Suitable for BMW, Benz,Audi,chrysler, ford, honda, mazda, nissan, toyota, vw, & more Compatible with: Windows xp, vista, windows7 32-bit & 64-bit, osx operating systems. Pc with easy obd-ii, scanmaster elm, wobd crazy and so on. Handheld equipments (suggested android smart phones) with os, android, symbian, windows mb etc. Compatible protocols: ISO15765-4/SAE J2480 (CAN BUS), ISO14230-4(KWP2000), ISO9141-2, J1850 VPW, J1850 pwm. Compatible apps: android/ iOS/Windows
App controlled light switchProduct Description:MSS510 complies with US/CA wall switch regulations and can seamlessly replace your conventional wall switches. With the clearly designed setup wizard in app, the wiring process has never been easier. Neutral wire is required for the installation. The wall switch works with Amazon Alexa and Google Assistant. Support sunrise and sunset setting. It allows you to turn the connected lights or fans on and off, and to set schedules or auto-off timer routine around your daily needs. And the wifi switch operates using Wi-Fi. You can simply connect it to your existing home Wi-Fi without the need to purchase an extra hub.Control lights With Your VoiceYou can voice control your devices after compatible with Amazon Alexa or Google Assistant . Assign a name to each smart wall switch and make a voice command by name.Remote Control Your LightsControl your lights from anywhere by the app (iOS 9.0 or higher, Android 4.1 or higher). Just a tap on your phone screen to turn on/off the lights.Schedule and Automatic SettingSchedule the lights automatically turn on/off. Support sunrise and sunset setting. Added benefit of saving energy when lights are not needed or are left on by accident.Specifications:Input: 100-125V~, 60Hz, 15.0A Output: 100-125V~, 60HzButton: On/Off ButtonAntenna: One Internal AntennaWireless Standards: IEEE 802.11 b/g/n, 2.4GHz, 1T1RWireless Security: Support 64/128 bit WEP, WPA-PSK/WPA2-PSKSystem Requirements: iOS 8 or higher, Android 4.1 or higher, Existing Wi-Fi networkEnvironment: Operating Temperature: 0~40 (32~104)
DescriptionETL/CETL Slide Dimmer with Switch, ,120VAC, 60Hz.ModelDMS-S1-120NDMS-S3-120NSingle Pole/Three-waySingle PoleThree-wayAdjustment DialYesYesFeatures1. Control 700W Halogen/Incandescent, 150W Dimmable LED/CFL.2. With Sensitivity Dial to make sure steady performance when compatible with different brands light bulbs.3. Smooth-action slide control for easy precise operation4. Longer mounting strap increases wall board contact area, eliminating floating installations5. Full-range dimming, lighting fade up and down smoothly allowing your eyes to adjust to changing light levels.CertificateOperation***Set slider to bottom before adjusting dimming range. When the slider is at the top, the sensitivity dial will be out of operation.
Product Details of catalytic converter for nissan Altima 2.5L 2002-20061.Easy Install-OE-style routing and hanger position for easy installation.2.Thick OE-style flanges, , hangers and brackets for enhanced strength.3.Flange to flange, direct fit design bolts to existing exhaust.4.Designed for use on OBDII (1996 and newer) vehicles.5.Federal Emissions compliant design.6.EPA Approved ;7.TWG products are covered by 25,000-miles catalytic performance & 50,000-miles structural integrity warranty.Catalytic converter for nissan Altima 2.5L 2002-2006A catalytic converter is an exhaust emission control device that converts toxic gases and pollutants in exhaust gas from an internal combustion engine into less-toxic pollutants by catalyzing a redox reaction (an oxidation and a reduction reaction).Fits the following vehicles:FitmentNissan Altima SL Sedan 4-Door 2.5L 2002-2006Nissan Altima S Sedan 4-Door 2.5L 2002-2006Nissan Altima Base Sedan 4-Door 2.5L 2002-2006Nissan Sentra SE-R Spec V Sedan 4-Door 2.5L 2002-2006Nissan Sentra SE-R Sedan 4-Door 2.5L 2002-2006Feature of Direct Fit Catalytic Converter for Wrangler 4.0LÂ Ceramic catalyst cores are typically wrapped in mounting mats made of ceramic fibers and packaged into steel housings. Specially developed materials and technologies allow the design and construction of extremely durable catalytic converters. A number of converter canning technologies were developed, including clamshell, tourniquet and stuffing. In each of the technologies, the converter shell geometry has to provide the required mounting density for the mat. The design of converter inlet and outlet headers or cones affects the gas flow distribution and pressure drop. In applications with space limitations, catalysts can be placed inside catalytic mufflers.Workshop
Product Details of Catalytic Converter Exhaust Manifold for Nissan Altima1.High precious metal load and high technology washcoat for premium performance.2.Stainless steel construction, ,internal substrate material and precious metal loading have been carefully engineered for maximum efficiency and to avoid "MIL" code issues that are common with lower quality products.3.Federal Emissions compliant design.4.EPA Approved;5.TWG products are covered by 25,000-miles catalytic performance & 50,000-miles structural integrity warranty.Catalytic Converter Exhaust Manifold for Nissan AltimaCatalytic converters are usually used with internal combustion engines fueled by either petrol (gasoline) or diesel.Manufacturer Part Number: 674-659 , RI19590Interchange Part Number:40810, 641169, 1195,NIS2527, NIS2534Fits the following vehicles:Fitment2002 2003 2004 nissan altima Base Sedan 4-Door/S Sedan 4-Door/SL Sedan 4-Door 2.5L2002 2003 2004 2005 Nissan Sentra SE-R Spec V Sedan 4-D/SE-R Sedan 4-Door 2.5L2003 Nissan Sentra Limited Edition Sedan 4-Door 2.5L2004 Nissan Sentra S Sedan 4-Door/LE Sedan 4-Door 2.5LFeature of Direct Fit Catalytic Converter for Wrangler 4.0LCeramic catalyst cores are typically wrapped in mounting mats made of ceramic fibers and packaged into steel housings. Specially developed materials and technologies allow the design and construction of extremely durable catalytic converters. A number of converter canning technologies were developed, including clamshell, tourniquet and stuffing. In each of the technologies, the converter shell geometry has to provide the required mounting density for the mat. The design of converter inlet and outlet headers or cones affects the gas flow distribution and pressure drop. In applications with space limitations, catalysts can be placed inside catalytic mufflers.Workshop
Product Details of Front Catalytic Converter Exhaust Manifold for Chevy Silverado1.Designed for use on OBDII (1996 and newer) vehicles.2.Federal Emissions compliant design.EPA Aprroved 3.Fitment-Chevrolet Silverado 1500 2500 ;Avalanche 1500 ;Chevrolet Tahoe; Suburban 1500 ; GMC Yukon Youkon XL1500 ;Cadillac Escalade.4.TWG products are covered by 25,000-miles catalytic performance & 50,000-miles structural integrity warranty.Function of Front Catalytic Converter Exhaust Manifold for Chevy SilveradoCatalytic converters (CAT) are designed to turn harmful constituents of exhaust emitted by internal combustion engines into harmless gases by means of a chemical reaction Manufacturer Part Number: 674-659, RI19590Interchange Part Number:40810, 641169, 1195,NIS2527, NIS2534SpecificationOxygen Sensor Ports: 4(all in the factory locations)length�40.5 in. overall lengthLocation:FrontRecommended Use:OE ReplacementInlet Type:Dual (3-bolt spinner and 3-bolt welded flange)Outlet Type:Single (2-bolt welded flange)Superseded Part Number: 14002-9J305, 674-659, 208A28J110, 208A28J112Fits the following vehicles:Chevrolet Silverado 1500 4.3L 4.8L 5.3L 1999-2006 Chevrolet Silverado 2500 5.3L 1999 2000/Chevrolet Avalanche 1500 5.3L 2002-2005Chevrolet Tahoe 4.8L 5.3L 2002-2006/Chevrolet Suburban 1500 4-door 5.3L 2000-2006GMC Yukon 4.8L 5.3L 2000-2006/GMC Yukon XL 1500 5.3L 2000-2006GMC 1500 4.3L 4.8L 5.3L 1999-2006/GMC 1500 Classic 4.3L 4.8L 5.3L 2007GMC 2500 5.3L 1999 2000/Cadillac Escalade 5.3L 2002-2005Feature of Front Catalytic Converter Exhaust Manifold for Chevy SilveradoCeramic catalyst cores are typically wrapped in mounting mats made of ceramic fibers and packaged into steel housings. Specially developed materials and technologies allow the design and construction of extremely durable catalytic converters. A number of converter canning technologies were developed, including clamshell, tourniquet and stuffing. In each of the technologies, the converter shell geometry has to provide the required mounting density for the mat. The design of converter inlet and outlet headers or cones affects the gas flow distribution and pressure drop. In applications with space limitations, catalysts can be placed inside catalytic mufflers.Workshop
Product Details of Catalytic Converter Exhaust Manifold Honda Civic 1.7L1.High precious metal load and high technology washcoat for premium performance.2.Fitment: Honda Civic 1.7L 2001 - 2002 - 2003 - 2004 -2005 OR models with 3 cylinder, 1.7 liter engines ONLY (1,668 cc Displacement) DX - LX - CXâ??VX3.TWG products are covered by 25,000-miles catalytic performance & 50,000-miles structural integrity warranty.Catalytic Converter Exhaust Manifold Honda Civic 1.7LA catalytic converter converts the harmful exhaust gases produced by the engine into less harmful emissions before they leave the vehicle's exhaust system.Replaces Part Numbers: 673-608 & 674-608OE Numbers: 18160-PLM-A00 18160-PLM-A50Fits the following vehicles:20012002 2003 2004Honda Civic DX Coupe 2-Door 1.7LHonda Civic DX Coupe 2-Door 1.7LHonda Civic DX Sedan 4-Door 1.7LHonda Civic DX Sedan 4-Door 1.7LHonda Civic EX Coupe 2-Door 1.7LHonda Civic EX Coupe 2-Door 1.7LHonda Civic EX Sedan 4-Door 1.7LHonda Civic EX Sedan 4-Door 1.7LHonda Civic GX Sedan 4-Door 1.7LHonda Civic GX Sedan 4-Door 1.7LHonda Civic HX Coupe 2-Door 1.7LHonda Civic HX Coupe 2-Door 1.7LHonda Civic LX Coupe 2-Door 1.7LHonda Civic LX Coupe 2-Door 1.7LHonda Civic LX Sedan 4-Door 1.7LHonda Civic LX Sedan 4-Door 1.7LHonda Civic Si Coupe 2-Door 1.7LHonda Civic Si Sedan 4-Door 1.7L2004Honda Civic Value Package Coupe 2-DoorHonda Civic Value Package Sedan 4-Door2005Honda Civic DX Sedan 4-Door Honda Civic EX Coupe 2-DoorHonda Civic EX Sedan 4-DoorHonda Civic EX Special Edition Coupe 2-DoorHonda Civic EX Special Edition Sedan 4-DoorHonda Civic GX Sedan 4-DoorHonda Civic HX Coupe 2-DoorHonda Civic LX Coupe 2-DoorHonda Civic LX Sedan 4-DoorHonda Civic LX Special Edition Coupe 2-DoorHonda Civic LX Special Edition Sedan 4-DoorHonda Civic Reverb Coupe 2-DoorHonda Civic Reverb Sedan 4-DoorHonda Civic Si Coupe 2-DoorHonda Civic Si Sedan 4-DoorHonda Civic Value Package Coupe 2-DoorHonda Civic Value Package Sedan 4-DoorFeature of Catalytic Converter Exhaust Manifold Honda Civic 1.7LCeramic catalyst cores are typically wrapped in mounting mats made of ceramic fibers and packaged into steel housings. Specially developed materials and technologies allow the design and construction of extremely durable catalytic converters. A number of converter canning technologies were developed, including clamshell, tourniquet and stuffing. In each of the technologies, the converter shell geometry has to provide the required mounting density for the mat. The design of converter inlet and outlet headers or cones affects the gas flow distribution and pressure drop. In applications with space limitations, catalysts can be placed inside catalytic mufflers.Workshop
Product Details of Direct Fit Catalytic Converter for Wrangler 4.0L 1.This direct fit item is manufactured from high quality and durable stainless steel catalytic case for long lasting durability and for better protection.2.OBD-II and EPA compliant catalytic converter;3.Designed for easy installation - it requires no cutting or welding! 4. manufactured in accordance to industry standards to ensure product durability and reliability. 4.TWG products are covered by 25,Website:http://www.twgexhaust.com,000-miles catalytic performance & 50,000-miles structural integrity warranty.Direct Fit Catalytic Converter for Wrangler 4.0LFits the following vehicles:Position: Front2006 Jeep Wrangler (TJ) 65th Anniversary Edition 4.0L2004-2006 Jeep Wrangler (TJ) Rubicon 4.0L2004 Jeep Wrangler (TJ) Sahara 4.0L2006 Jeep Wrangler (TJ) SE 4.0L2004-2006 Jeep Wrangler (TJ) Sport 4.0L2004-2006 Jeep Wrangler (TJ) Unlimited 4.0L2005-2006 Jeep Wrangler (TJ) Unlimited Rubicon 4.0L2004-2006 Jeep Wrangler (TJ) X 4.0LFeature of Direct Fit Catalytic Converter for Wrangler 4.0L Ceramic catalyst cores are typically wrapped in mounting mats made of ceramic fibers and packaged into steel housings. Specially developed materials and technologies allow the design and construction of extremely durable catalytic converters. A number of converter canning technologies were developed, including clamshell, tourniquet and stuffing. In each of the technologies, the converter shell geometry has to provide the required mounting density for the mat. The design of converter inlet and outlet headers or cones affects the gas flow distribution and pressure drop. In applications with space limitations, catalysts can be placed inside catalytic mufflers.Workshop
