DAILY: Quotation of Standard I Grade Met Coke at Ports Stable On September 3, quotation of standard I grade metallurgical coal by traders at ports stabilized at 1930-1950 yuan/t (in cash, picked up by buyers). At present, most coke concentrated onto yards is of locked orders at before. There is only tiny purchase of new orders since price at ports is relatively high and coking plants basically run out of stock. Price of standard I grade metallurgical coal was 1970-1990 yuan/t fob (bank acceptance); that of I grade metallurgical coal (CSR65) was 2090 yuan/t fob; prices above were stable now and might increase later. In general, traders were bullish on the market in September. Link: Market price of Lianyungang Port Metcoke on Sep 3,20 Link: Market price of Qingdao Metcoke on Sep 3,20
DAILY: Quotation of Standard I Grade Met Coke at Ports up 20 yuan On September 5, leading steel mills in East China reported the second round of price adjustment. On September 7, price of standard I grade metallurgical coke quoted by traders went up by 20 yuan to 1950-1970 yuan/t (in cash, picked up by buyers). Some traders took a wait and see attitude and offered no quotation. It�¢??s expected that transaction price of 1920-1930 yuan/t at before will be increased by 10-20 yuan to 1930-1950 yuan/t. Price of standard I grade metallurgical coke quoted by coking enterprises was 2020-2040 yuan/t fob (bank acceptance); that of I grade metallurgical coke (CSR65) was 2140 yuan/t after the price hike of 50 yuan. Link: Market price of Jingtang Port Metcoke on Sep 7,20 Link: Market price of Lianyungang Port Metcoke on Sep 7,20 Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
DAILY: Met Coke Price Stable at Ports On September 15, price of standard I grade metallurgical coke quoted by traders stabilized at 1930-1950 yuan/t (in cash, picked up by buyers). However, some coke was sold at a lower price about 1930 yuan/t. Some traders said that quotation at ports might increase after the third round of price hike, but would still be stable in recent days. Currently, coke transported to ports decreases and traders mainly focuses on shipping. Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
DAILY: Coking Enterprises in SW China to Raise Price by 50 Yuan On September 21, coking enterprises in Southwest China planned to raise price by 50 yuan in the second half of this month, a cumulative growth of 100 yuan in September, which was still under negotiation. Steel mills were reluctant to accept another 50-yuan hike given that price of raw material was high while steel market only took slim margin. Currently, price of coke (F.c 85%) from leading steel mills in Guizhou is stable at 2060 yuan/t (dry basis, delivered to factory); price of coke (F.c 83%) from leading steel mills in Yunnan stays at 2080 yuan/t (in cash, dry basis, delivered to factory). Last week, coking enterprises in North, East China put forward the third round of 50-yuan increase, to which most steel mills did not give clear response yet. It�¢??s expected to be completed this week. Although it�¢??s said that several steel mills in Yunnan might raise the price by 50 yuan in the second half of this month (30 yuan in the first half of September), most coking plants refused that and insisted on a cumulative growth of 100 yuan this month. This price hike was still under negotiation. Link: Market price of Kunming Metcoke on Sep 21,20(new) Link: Market price of Guiyang Metcoke on Sep 21,20(new)
DAILY: More Capacity to be Eliminated in Taiyuan On October 29, price of I grade metallurgical coke (CSR65) in Taiyuan, Shanxi delivered to Tangshan was 2250 yuan/t, some at 1880 yuan/t (ex-works, picked up by buyers). At present, supply falls short of demand. To date, 3.74mn t of coking capacity was eliminated in Taiyuan. 4.5mn t was expected to be phased out by the end of this month. 750,000 t of newly-added capacity was put into production and another 750,000 t will be added in these two days. November and October will see more newly-added capacity. Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
Foudnry coke used in Blast furnace casting, steelmaking, sand casting, Block size (mm) > 60 Dry ash free volatile matter Vdaf% 1.50% Total sulfur st, d% 0.50% Drum strength M40%: 96 Apparent porosity (PS)%: 28 Coke crushing rate (40mm)%: 2.3 Drop strength%: 98.3 Ash content (AD)%: super grade â?¤ 8.00 Grade I: 8.01 ~ 10.00 Grade 2: 10.01 ~ 12.00
SteelHome Express: Price of Metcoke in Southwest China down 50 Yuan in the First Half of August On August 10, price of metcoke of steel mills and coking plants in Southwest China decreased by 50 yuan in the first half of August. Procurement price of metcoke (C85%) of leading steel mills in Guizhou dropped by 60 yuan to 2010 yuan/t (dry basis, delivered to factories). Procurement price of metcoke (C83%) of leading steel mills in Yunnan was 2050 yuan/t (dry basis, delivered to factories). Price of metcoke in leading coking plants in Yunnan-Guizhou area declined by 50 yuan/t. At present, ex-works price of metcoke (C85%) in Liupanshui, Guizhou was 2000 yuan/t (dry basis); prices of metcoke (C85%) and metcoke (C80%) in coking plants in Qujing were 1945 yuan/t and 1715 yuan/t (dry basis). Link Market price of Guiyang Metcoke on Aug 10,20 Link Market price of Kunming Metcoke on Aug 10,20
Semi coke can be 100% used in the production of ferrosilicon and ferronickel, reducing production power consumption and increasing single furnace output. If you are interested in our products, please contact us to provide the latest market consultation and free samples for your reference. In case you have any interests, please do not hesitate to contact us.
Special price, low sulfur Artificial Graphite-Graphite Petroleum Coke(GPC) Sulfur: 0.05%,FC: 98.5% 0.2-1mm,1-5mm, etc. E-mail: julie@hangbaint.com Mobile/Wechat/Whatsapp: 0086 15227360703 #coke #GPC #sulfur #graphite #petroleum #artificialgraphite #syntheticgraphite #China #Price Carbon raiser is a carbon material, produced at high temperatures and used for carburization of steel and cast iron. It is applied during the steelmaking with low cast iron content (allow of steel and carbon) in charge in oxygen converter and electrosmelting processes. In metallurgy carbon raiser (milled graphite) is widely used for slag foaming, during coal graphite production, as a filler for graphite-reinforced plastic.
Semi coke is made from high grade Jurassic coal as a new type of carbon material. Semi coke produced in China, and main production city in Shaanxi China. Semi coke can instead of metallurgical coke to be used in producing ferroalloys products. Semi-coke is light black, characterized by high fixed carbon, high specific resistance, high chemical activity, low ash content, low sulfur and Low phosphorus. It is wildly applied to chemical industry, metallurgic industry, and gas- making industry to produce Ferroalloys, ferrosilicon, Ferronickel ,Ferrochrome, FeMn & SiMn, as well as Calcium carbide and, fertilizer, etc. F.C.: 84% min Ash: 8% max Volatile matter: 8% max Sulfur: 0.35% max Moisture: 18% max Semi coke is made from high grade Jurassic coal and as a new type of carbon material. It can be instead of some metallurgical coke when produce ferroalloys products. Using semi coke during steel making, blended the semi coke with met coke, which reduced their cost 20% to 30% than using met coke only. Advantage of semi coke than Met Coke in production of Ferro-alloy smelting as deoxidizer (1). Semi Coke could improve the quality of the ferro alloy significantly (especially low aluminum alloy Al2O3â?¤0.1%). (2). Semi Coke could reduce unit electricity consumption significantly (nearly save more than 1000 KWHR, that means 8-10%) (3). Semi coke could lower the cost of raw material. Although the price of semi coke and coke is similar, but its far cheaper than charcoal and pet-coke (4). Its very simple to replace coke, pet-coke and charcoal with semi coke. Its no need to upgrade your equipment and the operation is easy and process is simple.
Model No. GPC Fixed carbon(Min) 98.5% Ash(Max) 0.8% Volaltie matter(Max) 0.7% Sulfur(Max) 0.05/0.2-0.4% Moisture(Max) 0.5% Size 0.2-1mm,1-5mm,4-7mm
Model No. CPC Fixed carbon(Min) 98.5% Ash(Max) 0.8% Volaltie matter(Max) 0.7% Sulfur(Max) 0.5/3% Moisture(Max) 0.5% Size 0.2-1mm,1-5mm,4-7mm
Semi coke Model No. SC-01 SC-02 Fixed carbon(Min) 84% 84% Ash(Max) 8.0% 8% Volaltie matter(Max) 8.0% 8.0% Sulfur(Max) 0.35% 0.35% Moisture(Max) 18% 3% Size 8-18mm,18-35mm,30-60mm,0-1mm,1-3mm
Metallurgical coke Model No. MC-01 Fixed carbon(Min) 85% Ash(Max) 13.50% Volaltie matter(Max) 1.5% Sulfur(Max) 0.8% Moisture(Max) 8% Size 10-30mm,20-40mm,30-80mm,90-150mm,120-250mm
Foundry coke Model No. FC-01 FC-02 FC-03 Fixed carbon(Min) 90% 88% 86% Ash(Max) 8% 10% 12% Volaltie matter(Max) 1.5% 1.5% 1.5% Sulfur(Max) 0.6% 0.6% 0.6% Moisture(Max) 7% 8% 8% Size 10-30mm,20-40mm,30-80mm,90-150mm,120-250mm
Foundry coke is widely used in iron making because of its special physical and chemical characteristics. It's the main cupola molten iron fuel, foundry coke plays an important role in melting furnace charge and overheat the molten iron, support stock column, maintain good air permeability. Therefore, foundry coke with large size,low reactivity, low porosity, sufficient impact resistance and crushing strength, low ash and sulfur content, it is popular in the international markets.
Graphitized petroleum coke
Hello everyone! We can supply Foundry coke Metallurgical coke Semi coke Graphitized petroleum coke Calcined anthracite coal Dry quenching coke
Place of Origin Henan, China Brand Name GUOHAN Shape Granule Material Petroleum coke Chemical Composition F.C/S Packaging Details 1 ton big bag or as customers' requirements 20-25 MT/per container
