This product is primarily used in blending marine oil and high quality internal combustion engine oil, especially the engine oil for high-sulfur fuel. It is brown liquid. The recommended dosage is 0.5-25.0%. Characteristics Strong acid neutralization capacity Good oil solubility Scatter glial and ash Good anti-rust and anti-foam ability Good thermal stability and hydrolytic stability Excellent performance of water resistance and high-temperature detergency. 200 liter metal drum (net weight: 200 kg/drum).
This gear oil additive package can be used in blending the following grads of API GL-5 vehicle gear oil: SAE90, 80W/90, 85W/90, 85W/140 and the following grads of industrial gear oil: N68, N100, N150, N220, N320, N460. It is brown transparent liquid. Characteristics: Be available for all kinds of base oils The GL-5 80W/90 vehicle gear oils with the dosage of 4.5% G353 have passed the test of CRCL-42, CRCL-33, CRCL-37 and CRCL-60 etc. The 320 heavy load industrial gear oils with the dosage of 1.6% G353 meet the standard of American steel USS-224. 200 liter metal drum (net weight: 200 kg/drum).
This product is a compound of zinc-dithiophosphate, detergent, dispersant and antioxidant. It is primarily used in blending various low-grade and middle-grade lubricant oils. With very low dosage, it can meet the requirements of SB/CB and SC/CC grade oils. The product is brown liquid. The recommended dosage is as below: API grade Single-grade Multi-grade SB/CB 1.8% 2.0% SC/CC 1.8% 2.0% SD/CC 3.5% 3.9% SE/CC 3.5% 3.9% SF/CD 4.0% 4.4%. CHARACTERISTICS Excellent detergency, dispersion and anti-oxidation ability. 200 liter metal drum (net weight: 200 kg/drum)
Apperance: White Powder. Use: in painting, printing oil, paper making, plastic, rubber, artificial fiber, welding electric, enamel, electric appliances and construction material. 1)Good luster, 2) Strong dispersion and dyeing force, 3) White powder, 4) Insoluble in water, 5) Soluble in hot and strong acid and alkali, 6) Good chemical stability, 7) Strong tint-reducing power, 8) Hiding power, 9) Excellent . 25KG PP BAGS 22MT/20'FCL.
This product is primarily used for blending cylinder oil for low speed marine engine with outside guide and high quality engine oil, especially environment-friendly internal combustion engine oil. The recommended dosage in oil is 2.0-4.0%. The product is packed in 200 liter metal drum (net weight: 170 kg/drum).
Item iron oxide red 130 Fe2o3/fe3o4 fª%96 105fpc moisture fn%1.0 Water soluble salts fn%0.3 Residue on 45um fn%0.2 Ph-value3.5-8 Oil absorption 15-25 Tinting strength %95-105 Density approx / cm3 5.0-5.1 Iron oxide red 190 Fe2o3/fe3o4 fª%95 105fpc moisture fn%1.0 Water soluble salts fn%0.3 Residue on 45um fn%0.2 Ph-value3.5-8 Oil absorption 15-25 Tinting strength %95-105 Density approx / cm35.0-5.1 Iron oxide brown 610 Fe2o3/fe3o4 fª%92 105fpc moisture fn%1.0 Water soluble salts fn%0.5 Residue on 45um fn%0.3 Ph-value 4--7 Oil absorption 20-30 Tinting strength %95-105 Density approx / cm34.8 Iron oxide black 780 Fe2o3/fe3o4 fª%93 105fpc moisture fn%1.0 Water soluble salts fn%0.5 Residue on 45um fn%0.3 Ph-value 5--8 Oil absorption 15-25 Tinting strength %95-105 Density approx / cm3 4.5-5.0 Iron oxide yellow 313 Fe2o3/fe3o4 fª%86 105fpc moisture fn%1.0 Water soluble salts fn%0.3 Residue on 45um fn%0.3 Ph-value 3.5--7 Oil absorption 25-35 Tinting strength %95-105 Density approx / cm34.0-4.3 Iron oxide blue Fe2o3/fe3o4fª% 105fpc moisture fn%1.0 Water soluble salts fn%0.5 Residue on 45um fn%0.3 Ph-value Oil absorption Tinting strength %95-105 Density approx / cm3 25kg net bag, 23mt in 20f+fcl
Soda ash light Total alkalinity(as the dry na2co3 %)99.2% min Chloride(as the nacl %) 0.7% max Iron(as the fe %) 0.004% max Matter insoluble in water 0.08% max Loss on ignition 0.8%max Soda ash dense Total alkalinity(as the dry na2co3 %) 99.2% min Chloride(as the nacl %) 0.7% max Iron(as the fe %) 0.0035% max Matter insoluble in water 0.03% max Bulk density(g/ml) 0.90min Caustic soda Caustic soda 99% Naoh99% min Na2co30.90% max Nacl 0.15% max Fe2o30.007% max Caustic soda 96% Naoh96% min Na2co31.4% max Nacl 2.8% max Fe2o30.01% max Soda ash:25kgs net bag, 20mts in the 20f+fcl Caustic soda:25kg plastic bags(3layer pp&pe)
Lithopone28% Ba+so4 (as zns)%(m/m) 99min Zns%28min Zno% 0.6min Volatile matte%0.3max Matter soluble in water% 0.4max Residue on sieve 63um% 0.1max Oil absobpation value(100g)14max Lithopone30% Ba+so4 (as zns)%(m/m) 99min Zinc (as zns) (m/m)%30min Zinc oxide %(m/m) 0.3max 105fª volatile%(m/m) 0.3max Water soluble%(m/m) 0.3max Screen residues (63um mesh) %(m/m)0.1max Oil absorption g/100g 10max 25kgs net bag, 21mts in the 20f+fcl
Titanium dioxide anatase type Tio2 98%min Volatile content 0.4%max Water soluble matter 0.5%max Oil absorption 26%max Suspension ph 6.5-8.0 Titanium dioxide rutile type Tio2 93%min Water soluble matter 0.3%max Oil absorption22%max Suspension ph 6.5-8.0 45umsieve residue0.1%
Zinc oxide 99% Content (zno)99%min Mno0.001%max Pbo 0.15%max Cuo 0.001%max Heat loss 0.3%max Hcl insoluble matter 0.01%max Water soluble matter 0.1%max 45um sieve residue 0.15%max Zinc oxide 99.5% Content (zno)99.5%min Mno0.0005%max Pbo0.05%max Cuo0.0005%max Heat loss 0.3%max Hcl insoluble matter 0.01%max Water soluble matter 0.1%max 45um sieve residue 0.15%max Zinc oxide 99.7% Content (zno) 99.7%min Mno0.0004%max Pbox0.037%max Cuo00.0004%max Heat loss 0.3%max Hcl insoluble matter 0.01%max Water soluble matter 0.1%max 45um sieve residue 0.15%max 25kg net bag, 20mt in 20f+fcl
M/m tio2 content%í² 94 Tint reducing power european unit í² 180 Whiteness % í² 97.0 Dispersibility mí 12 Oil absorptiong/100g í 20 105moisture % í 0.75 Specific resistance +.Cm í² 9000 Solution in water % í 0.3 Residue(45m) í 0.01 Ph value 6.5-8.0 Volatile matter(105d)í² - Rutile
Titanium dioxide rutile (chlorination process) Content% ---------------------------------------------- 93min Color(whiteness)% --------------------------------- 98min Tint redusing power% ---------------------------- 100 min Oil absorption (g/) ------------------------- 22 max Density(g/cm3)-----------------------------------------4.0 Ph value ------------------------------------------------ 6.5-8.0 45 um sieveresidue %---------------------------- 0.1max Water-soluble matter% ----------------------------- 0.3max Rutile in tio2 content% ----------------------------- 98min Pp bag
Introduction to the Product These series products of nano titanium dioxide are independently developed by our corporation and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of less than 100 nm. Nano titanium dioxide of our corporation has the properties of good transparency, and excellent absorbency to UVA and UVB, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Nano titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid. Characteristics of the Product HTTi-01 is a nano powder made of nano TiO2 mixed with some metal or metal oxide. Its crystal is anatase, and it may be used for producing photocatalyst. Under the illumination of light of less than 400 nm, the valence electrons of this powder are sent to the conduction band to put the electron and cavity in action with O2 and H2O absorbed on their surface and produce superoxide anion radicals. These radicals have the function of decomposing hazardous gas and organic pollutants through photo catalysis and antisepsis through photo catalysis, and can be widely used in air purification and sewage treatment. Moreover, this product is characterized by low cost, good stability, high photocatalytic activity and wide range of absorption of light wave. HTTi-01-W and HTTi-01-Mn has the highest catalytic activity, HTTi-01-N also has high catalytic activity. These products can be used in the field of decomposition the automobile exhaust, increasing fuel combustion efficiency and sewage treatment, etc. Technical Index Model: HTTi-01 Appearance: White powder Content of titanium oxide (%): 99 Average of the grain size (nm): 10 Specific surface area (m2/g): 150 Crystal /surface treatment by: anatase Characteristics: large specific surface, high photocatalytic activity Model: HTTi-01-W Appearance: White powder Content of titanium oxide (%): 94 Average of the grain size (nm): 10 Specific surface area (m2/g): 100 Crystal /surface treatment by: anatase Characteristics: highest photocatalytic activity 5/10kg/bag
Introduction to the product These series products of nano titanium dioxide are independently developed by our corporation and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of less than 100 nm. Nano titanium dioxide of our corporation has the properties of good transparency, and excellent absorbency to uva and uvb, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Nano titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid. Characteristics of the product Htti-03-h and htti-04-h are made for cosmetics. The model of htti-03-h is hydrophilic, while htti-04-h is lipophilic. These products have very good characteristics of even granularity and more excellent absorbency to uva and uvb than sun organic screener. They are widely and safely used as inorganic sun screener in the cosmetics and well compatible with other raw materials. They are the ideal additive of the sunscreen, anti-ultraviolet rays cosmetics. Technical index Model: htti-03-h Appearance: white powder Content of titanium oxide (%): 88 Average of the grain size (nm): 30 Specific surface area (m2/g): 100 Crystal /surface treatment by: especially for cosmetics, hydrophilicity Characteristics:good transparency, clear blue light and has the ability to resist the ultraviolet ray Model: htti-04-h Appearance: white powder Content of titanium oxide (%): 85 Average of the grain size (nm): 30 Specific surface area (m2/g): 100 Crystal /surface treatment by: especially for cosmetics, lipophilicity Characteristics:idem 5/10kg/bag
Titanium dioxide, rutile titanium dioxide, anatase titanium dioxide, soda ash, caustic soda, formic acid, oxalic acid, glacial acetic acid, phosphoric acid, boric acid, sulfamic acid, stearic acid, dodecyl benzene sulfonic acid (dbsa), sodium formate, chrome oxide green, lead oxide, iron oxide, iron oxide red, iron oxide yellow, aluminum tripolyphosphate, zinc oxide, chrome yellow, lithopone, carbon black, sodium bicarbonate, hydrogen peroxide, sodium metabisulphite, polyacrylamide(pam), aluminium dihydrogen phosphate, zinc phosphate, aluminium sulphate, copper sulfate, sodium hexametaphosphate, calcium chloride, ultramarine blue, sodium tripolyphosphate
Type: SHMP 68% Tech Garde Properties: White powder, density is 2.484 (20C), easily soluble in water, but not in organic solution, absorbent to dampness, and turn sticky when absorbed dampness in air. It is possible to form solvent compound with metallic ions such as Ca, Ba, Mg, Cu and Fe; It is a fine agent for water treatment.
Caustic soda flake 99% Other name: sodium hydroxide flake, naoh, sodium hydroxide flake 1. Description: Molecular formular: naoh, Cas no 1310-73-2 Formula naoh Molecular weight 40.01 g/mol Appearance white flakes Melting point 596 k (318.4) Relative density 2.1103kg/m3(as stp) Solubility 111 g/100 g in water 2. Packing: 25kg or 50kg/bag, also can according to customers's requirements/as buyers request. 3. Advantage: Caustic soda is our strong item, we can supply caustic soda /naoh at lower price and best quality. 4. Application: Baisc chemical raw material, widely used in chemical industry 1). Used in water softening, in the soap and refined oil line, refining petroleum products, sanitation, hygiene and production chemicals. 2). Used as acidity regulator, alkali, impregnant's pigment in food and drug industry 3). Used as a raw material in the manufacturing of soaps, detergents, textiles and paper. 5. Specification Naoh: 99.0%min Na2 co3: 0.5%max Nacl: 0.03%max Fe2 o3: 0.005%max Caustic soda Naoh Na2co3 Nacl Fe2o3 99% flakes 99.38%min 0.5%max 0.03%max 0.005%max 98%flakes 98.65%min 0.7%max 0.92%max 0.007%max 96%flakes 96.68%min 1.2%max 2.5%max 0.008%max 99%solid 99.30%min 0.5%max 0.03max 0.005%max 99%pearls 99.35%min 0.5%max 0.03%max 0.005%max 25kgs woven bag or upon clients request.
Caustic soda flake 99%min Molecular formula: naoh Molecular weight: 40 Cas no.: 1310-73-2 Hs code: 28151100 Specification: Naoh----------------99% Nacl--------------0.1% max Na2co3----------0.08% max Fe2o3-----------0.001% max Package: in 25kg poly woven bags Property: white pearls with strong corrosiveness, easily soluble in water, presenting alkaline solution and heat liberation, presenting deliquescence when exposed to air. Use: basic and important chemical feed. Used as textiles industry, printing, detergent, paper-making, soap-makinmetallurgy, glassenamel, medicament, oil-refining and making synthetic fiber, plastics, and many kinds of organic-mediacy, etc. 25kg poly woven bags
Calcium chloride 77% min Molecular formula: cacl2 Cas no.: 10043-52-4 Calcium chloride is an inorganic salt, which exists as solid or liquid. Solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. With different crystallized water contents, it can be dihydrate or anhydrous. Liquid calcium chloride is a colorless, clear solution. As calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature, it is widely used in snow & ice melting, dust control, oil & gas drilling, moisture-absorbing, etc. According to the content of crystal water in calcium chloride: (1). Calcium chloride dihydrate A. Calcium chloride flake dihydrate 74%min; 77%min; B. Calcium chloride granule/pellet dihydrate 74%min; 77%min (2). Calcium chloride anhydrous A. Calcium chloride powder anhydrous 94% min B. Calcium chloride pellets anhydrous 94%-97% min According to grade: (1). Calcium chloride industrial grade (2). Calcium chloride food grade Items Specifications Test results Calcium chloride (cacl2) 77% min 78.54% Megnisium and alkali metals chloride as nacl 5.0% max 2.83% Sulfate (as so4) 0.2% max 0.043% Insoluble matter in water 0.2% max 0.08% Magnesium chloride as mgcl2 0.5% max 0.05% Alkalinity as ca(oh)2 0.4% max 0.12% 25kg/bag 25kg/drum 20kg/carton
Calcium chlorid Molecular formula cacl. 2h2o Use pharmaceutical purpose Storage condition store in a welllight -closed container, protected from Characters white, crystalline, powder Molecular weight 110.99 Purity 74%min, 77%min, 94%min Place of origin shandong china Brand name dx Minimum order quantity: 20 ton Packaging details: 25kg/bag 25kg/drum 20kg/carton. Delivery time: sight. Within one week in receipt of deposit or l/c at Payment terms: l/c, t/t Supply ability: 10000 metric ton per year Pharmaceutical, injection, food grade. Standard: cp2005 bp2009 usp31 ep5 Packing: 25kg/bag 25kg/drum 20kg/carton We can supply the products of different grade. Parameter Specification Result Characters A white, crystalline powder, hygroscopic, freely soluble in water-soluble in alcohol Confirmed Identification It gives reaction of chlorides and calcium Confirmed Ph 5.5-7.5 Confirmed Barium Comply with the standard Confirmed Sulfates ín300 ppm 300 ppm Aluminum Comply with the standard Confirmed Heavy metals ín20 ppm 20 ppm Magnesium and alkali metals ín1.0% 1.0% Iron Comply with the standard Confirmed Organic volatile impurities Comply with the standard Confirmed Assay 99.0-107.0% 99.8% Total microbial count 100 cfu/gm max. 90 cfu/gm Moulds and fungi 10 cfu/gm max. 8 cfu/gm Specified pathogenes Absent Absent Pyrogen test 1.25 eu/gm 25kg packing
