Carbon electrode ball press machine is mainly used to make balls or blocks by using ferrous or non-ferrous metals , and then smelt them to raise added value. Ball press machine is always needed in metallurgy when scrap materials and adminicle need smelting, such as: carbon powder, anode paste, carbon electrode, magnesium, dedusting powder, mud, oxide skin, steel slag, iron ore concentrate, aluminum powder, bannisterite powder.
Horizontal drier Contact :angie li Mobile:86-13213057724 It is special designed to dry the wood material which combines the function of drying and cooling, so it can save 30-50% energy. During the drying process, the best moisture content to palletize is about 13-15%, the function of the rotary dryer is to make the crushed pieces with suitable moisture. The rotary dryer is made up of stove and main rotary body, which can realize to reduce the moisture from 60%-10%. The stove is fueled by coal, which can save electricity consumption largely. Product feature 1.Lower energy consumption; 2.Good and stable drying function; 3.Alternative fuel material 4.Simple operation and easy maintain. Modelproductivity(tons/day) Jxr1800a20-24 tons/day Jxr 1800b15-18 tons/day Jxr 1400a10-12 tons/day Jxr 1400b6-8 tons/day
Horizontal mixer Applicable to stirring of coal, metallury and refractories The main technical parameter: Model motor(kw)capacity(t/h) 30001515-20 25001110-15 20007.58-12 15005.55-8
Coal briquette machine Contact person: angie li Mobile:86--13213057724 It is widely applied to produce powdered coal and fine coke balls, powderd coal bat of fertilizer industry, applicable to mineral ball of chemical industry, applicable mineral fines of different kinds of ferrous and noní¬ferrous metal, applicable to iron scale and dust elimination of metallurgy and applied to produce balls of sluge and refractoriness. The main parameter: Model output (t/h)annual outputpower(kw) 2902ton5000ton5.5kw 3604 ton10000ton7.5 kw 4006 ton15000 ton11 kw 4307 ton17000 ton11 kw 4508 ton20000 ton15 kw 50010 ton25000 ton18.5 kw 60012 ton30000 ton22 kw 65014 ton35000 ton30 kw 75017 ton40000 ton37 kw 80020 ton50000 ton45 kw 120040 ton100000 ton75 kw Dry powder5 ton13000ton90+11 kw
If your resources wetness meets the needs, a biomass wood pellet press machine can produce timber pellets. If it does not fulfill the demands, it needs to be dried out, so it needs to be geared up with a wood dryer and also a warm blast range. Naturally this is if your basic material is timber chips. If your resources is wood chips (thickness less than 0.5 mm), it needs to be pulverized, which is equivalent to adding one more process. Some clients' raw materials are bark, which is additionally possible after including a wood pulverizer. Nevertheless, some customers' basic materials are wood scraps, due to the fact that the cost of wood scraps is cheap and also very easy to get, so there are numerous cases, then it is necessary to add a timber chipper, initially to cut the non-standard timber scraps into wood chips, and after that most likely to crush. For some customers whose resources are waste building layouts, it is essential to alter the wood chipper to a bamboo plywood crusher. Since the bamboo plywood itself has several iron nails, it is very simple to damage the blade on the timber chipper when making use of a timber chipper. Another reason is that the waste structure template is relatively broad, and the feed port of the timber chipper is typically 1250px. It is difficult to by hand break it in advance, right The bamboo plywood crusher can go into any type of bamboo plywood with a feed opening of less than 1.25 m, and also the gnawing knife of the bamboo plywood crusher is an ingot blade, as well as the iron nails have little result on him. Unlike wood chippers, the blades are easily damaged. Bamboo plywood is also an benefit of making timber pellets. Normally, its wetness material is really small, between 15-20%. Therefore, making use of bamboo plywood as pellets saves the trouble of wood drying out devices.
The Advantages Of A Wood Pellet Mill - The gearboxes are produced from high-quality cast iron materials which provide excellent shock reduction and low noise. The wood pellet mills adopt a gear drive that makes a higher efficiency when compared with worm drive or belt drive. The gear drive setup helps you to prevent belt slippage while extending the lifespan of your belt drive. - The equipment shell includes reinforced ribs and increased casting thickness, which significantly improves the overall strength of such mills, preventing the breakage in the shell. - The rollers and die are made of premium-quality alloy steel with 55-60HRC hardness. - These mills adopt an appropriate wood-processing die-hole structure and die-hole compression ratio. - The electric-control method is completely compliant with CE standard-os. - The Emergency Stop button quickly shuts across the mill should you be confronted with an urgent situation. Maintaining A Wood Pellet Mill - The belt tightness should be checked regularly. If it is slack, it needs to be tightened immediately. - The machine must be positioned in a well-ventilated area to make sure the warmth produced by the motor can emit safely, to prolong the lifespan of the machine. - Before restarting the machine, any remaining debris has to be cleared from your machine room to lessen starting resistance. - Oil must be filled regularly to each bearing to market inter-lubricating. - To ensure the cutter remains sharp, check this part regularly to avoid unnecessary damages to the other part. - Regularly inspect the cutter screws, to ensure the bond involving the knife and blade remains strong. - The equipment should take a seat on a good foundation. Regular maintenance of your machine will prolong the general lifespan of your respective machinery.
The wood pellet mill, which goes known as a wood pellet machine, or wood pellet press, is popular in many countries around the globe. Together with the continuing development of "biomass energy", now there are various production technologies employed to convert biomass into useable electricity as well as heat. The wood pellet machines are one of the typical machines that complete this task. Wood pellet mills turn raw materials like sawdust, straw, or wood into highly efficient biomass fuel. Simultaneously, the entire process of converting these materials in to a more dense energy form facilitates storage, transport, and use to the remainder of any value chain. In the foreseeable future, there are actually plans for biomass fuel to change traditional fuels. In addition, wood pellet machines provide you with the chances to start many different types of businesses. What Exactly Is A Wood Pellet Mill? Wood pellet machines are varieties of pellet machines to process raw materials like peanut shells, sawdust, leaves, straw, wood, and more. Today the pellet mills can be found in different kinds. The two main types add the ring die pellet mills as well as the flat die pellet mills. Wood pellet mills are designed for processing different styles of raw materials no matter what size. The pellet dimensions are also easy to customize with the use of a hammer mill.
Honeycomb coal briquette machine is to regard the well-processed coal dust as raw material, after crush, mix, and then compress to coal briquettes. This good quality iron raw coal charcoal honeycomb briquette machine uses iron powder charcoal/raw coal charcoal as raw materials. But, at first, the raw materials should be crushed into small pieces (the diameter < 1 mm). And this machine has a large capacity, so it is high efficiency. The holes on the surface of the coal briquette make them can be easily and completely burned, reducing energy waste. At the same time, this machine owns a lot of molds, and you can change the molds easily per your special needs. After many improvements, our honeycomb coal machine has the advantages of reasonable structure, high finished product density, superior performance and long service life.
Biomass energy is second only to coal, oil and natural gas one of the world's total energy consumption 4th. According to experts predict that biomass energy is likely to become an important part of the future sustainable energy system. In the middle of this century, using new technology to produce all kinds of biomass alternative fuels will account for more than 40% of total global fuel consumption. According to the demand of market, our technical team designs and manufactures the equipment of biomass pellet production line, which are suitable for the biomass material with the 35-56% moisture to make pellet,such as sawdust, bamboo shavings, wood shavings,barley straw, oat straw, wheat straw, rye straw, rice straw, rice husk, bagasse, sorghum straw, corn straw, beans stalk, peanut vine stalk,etc. We also help optimize the drying and pelleting process according to the property of different biomass materials, production scale, application requirements, cost control, automation level, and site condition.
Biomass briquette press machine designed by our factory is a newly-developed renewable energy equipment which can transform any Agro-wastes into bio-fuel pellets with high calorific value It can used almost all kinds of corn straw, straw, rice, wheat straw, wheat shell, bean straw, cotton stalk, medical dregs, tree branches, leaves and wood chips, sawdust, hay etc. Packaging Details: wooden case Delivery Detail: 15 days after getting your deposit
Product Description of briquette machine: The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces. This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor. Advantages of briquettes machine : As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc. http://www.wandamachinery.com.cn/ Packaging Details: wooden case Delivery Detail: 15 days after getting your deposit http://www.wandamachinery.com.cn/
(biomass pellet maker/pelletizer) refers to the compression of low energy density crops, forest waste, sawdust, and waste wood chips into granular fuel with high density, high specific gravity, and hard texture. The pressed biomass wood pellets have the characteristics of easy ignition, high calorific value, low ash content after combustion, cleanliness, and sanitation, which are widely used in industrial, domestic boilers, and civilian cooking and heating, and is a high-quality fuel that can replace coal. 1.Brief Description of The Biomass Pellet Machine The vertical biomass pellet making machine is composed of a pellet machine base, a large reduction gearbox, a bearing room, a feeding hood, a discharging part, a motor, a pressure roller assembly, and a mold. Its structure is compact and the appearance is beautiful. Besides, this biomass pellet processing machine is easy to move on the working site. The electric biomass pellet machine uses a direct motor connection. The motor is connected to the reducer shaft through a toothed coupling. After a 90 change of direction, the horizontal motor drives the vertical casting hollow transfer spindle. The spindle then drives the roller to roll the inner surface of the mold to complete the pressing process of wood biomass pellets.
Biomass burner, the combustion cost is 75% less than electricity, 60% less than fuel, 50% less than natural gas, 40% less than liquefied gas, and zero pollution. The inner liner of the biomass burner is made of zirconium and silicon crystallization, which is fired in a high temperature furnace after high-pressure pouring. It needs to be burned at a temperature above 1000 for three days without loose pores. Biomass burner, a biomass semi-gasification automatic control burner, biomass particles, wood chips, wood powder, sawdust and other organic biomass as fuel biomass pyrolysis burner, generally divided into air-cooled biomass burner and water-cooled biomass burner two models.
Feed pellet machine is divided into: ring mold feed pellet machine, flat mold feed pellet machine, roller feed pellet machine; According to the use can be divided into: small household pellet feed machine, poultry feed pellet machine, small poultry pellet feed machine, fish, pig, rabbit feed pellet machine; According to the production can be divided into: straw feed pellet machine, wheat bran feed pellet machine, soybean meal feed pellet machine, corn straw feed pellet machine, wood pellet machine and so on. A variety of different feed pellet machine, in appearance and production mode of different to the classification. Jinxiang feed pellet machine has the following characteristics: 1. Simple structure, wide adaptability, small footprint, low noise. 2. Powder feed and grass meal can be pelleted without the addition of a little liquid, so the moisture content of pellet feed is basically the moisture content of the material before pelleting, which is more conducive to storage. 3. Chicken, duck, fish, etc., can obtain higher economic benefits than the mixed powder feed. 4. Dry material processing, the production of feed particles with high hardness, smooth surface, internal maturation, can improve the digestion and absorption of nutrition. 5. Grain formation can denaturate trypsin resistance factors in grains and beans, reduce adverse effects on digestion, kill various parasitic eggs and other pathogenic microorganisms, and reduce various insect and digestive system diseases.
Wood Pellet Machine
Conduct oil heat (steam) drying drum dryer belongs to indirect heating mode, the heat conduction oil or steam drying heat, this type of dryer has low energy consumption of drying, the safety drying process, the material is not affected by heat source pollution, etc., which are widely used in the biomass, food, feed, fertilizer, bad slag chemical industry, medicine, coal, mining, and other small particles or weakly caking dry powder material.
Product Introduction Wood briquette machine is the main production equipment charcoal molding equipment, mainly wood chips, sawdust, rice husk, peanut shells, plant stalks and other carbonaceous wood materials, without any binder, after high temperature, high pressure process , Extruded into a solid rod with a central hole. Rod machine with automatic thermostat device, at a set temperature performance and stability, and has a reasonable structure, small size, small footprint, labor-saving, energy saving and easy operation and maintenance advantages. The solid bar produced by the machine is more flammable and has higher heat (more than 20% higher than that of common wood) after carbonization. It has small pollution when burned and is easy to store and transport in large proportion. It can make full use of crops and forest waste, Waste as treasure.  Raw material The source of raw materials is rich, almost any biomass material can be briquetted. Working principle Using the intrinsic attributes of the wood material, by spiral extruding under high temperature and pressure, wood element in wood material becomes plastic and makes the fine fiber combine, and at last stick solid plank fuel is formed. Main parts 1. Forming of tube, special casting steel, inner barrel boron treatment,continuously use for more than 5 months. 2. Heating ring: the material is stainless steel; on the molding tube for heating, so that the raw materials in the shape of conducive to shrinkage, easy to shape. 3. Propeller,advanced design,high speed of producing rod ,high density,high resistance to wear,one welding time can work continuously for more than 30 hours. Advantage 1. Increase the pitch to increase the amount of feed, a substantial increase in output. 2. With electric heating temperature control system to ensure the formation of stable discharge, improve work efficiency. 3. Optimization of the structure of the tube, reducing the friction between the mechanical and raw materials, an increase of the density of the stick. 4. Product bar shape and size of the selective, to meet different customer requirements.
( 1) Electric control cupboard: The electric box remains in the form of plastic splashing, and the strength and sturdiness are improved, and the covering will not break. Built-in security electronic control system, fully compliant with CE common operating system. ( 2) Gear box: The transmission is constructed from top notch actors iron product, with reduced noise and excellent shock absorption. The integrated gear revolves, which has high rotation efficiency as well as lengthy life span compared with the conventional belt equipment. ( 3) Upper box: Integrated die plate as well as pushing roller, premium alloy steel is utilized to improve the life span. Different die plate designs are suitable for various materials to guarantee the important result. What are the benefits of chicken feed pellet making device What are the benefits of a chicken pellet making equipment Equipment's feed pellet device generates high temperature and high pressure during the pressing procedure, the feed has a strong paste fragrance, and also the feed appearance is hard, which satisfies the qualities of gnawing animals of chicken, poultries, pigs, cattle and sheep, as well as boosts the palatability of the feed. Easy to consume, the nutrient absorption conversion rate is raised by 300%, safe as well as clean and sterile, the quantity of the straw is doubled after pelleting, which is convenient for long-term storage space and transportation. ( 1) Basic structure, wide applicability, small impact as well as reduced sound. ( 2) Powdered feed and also yard powder can be granulated without (or a little) liquid addition. Therefore, the moisture web content of pelleted feed is generally the dampness web content of the product prior to pelleting, which is a lot more conducive to storage. ( 3) The pellets produced by this hen pellet making equipment have high solidity, smooth surface and also sufficient internal healing, which can enhance the food digestion and absorption of nutrients, as well as can eliminate general pathogenic microbes and also bloodsuckers. It appropriates for elevating bunnies, fish, ducks and also laboratory animals., which is a lot more affordable than blended powder feed. ( 4) This SZLH hen pellet making device model is geared up with 1.5-12mm diameter mold and mildews, which are suitable for granulation of various materials and attain the best result. ( 5) Adjust to different materials to make certain the pressing impact. Compression molding of wood chips, corn stalks, etc needs a great deal of stress. In the very same kind of chicken feed pellet making equipment, the roller part is the main part of the whole devices, and the top quality alloy steel is used to enhance the service life of the roller.
Sawdust pulverizer is an perfect mechanical equipment for producing wood chips and edible fungi base materials. It can process wood, branches and other basic materials into wood chips at one time. It has the advantages of low investment, low power usage, high efficiency, good economic advantages, and maintenance Convenience and also other advantages, it is a unique tools for the advancement of edible fungi manufacturing or for the production of particleboard, sawdust board and also high-density board raw materials. This tools is utilized in the front area of the timber pellet mill offer for sale. Extent of application of sawdust shredder: This wood crusher equipment can refine all type of timber, timber scraps, branches and also forks, timber chips, board bordering, bark, bamboo as well as bamboo bark into sawdust as well as timber chip items at one time, as well as the completed items can be directly utilized for shiitake, mushroom, fungus It can likewise be made use of for the production of raw materials for particleboard, sawdust board and high-density board.
Chicken feed pellet making maker has the qualities of small framework, attractive appearance, huge diameter of feed opening, ring die layout, appropriate for making feed pellets, high output, reduced power consumption, convenient use and also trusted functioning performance. The stress rollers are equally arranged, as well as the procedure is steady. At the same time, and the manufacturing efficiency is boosted. The screw center stress managing structure is taken on, and the void in between the molds boosts and lowers, as well as it is suitable for various products to make certain the pressing result. 1. The extent of application of the chicken feed pellet making device: It is widely used in huge, medium and tiny aquaculture, grain and poultry feed plants, animals farms, poultry ranches, individual farmers and tiny and medium-sized ranches, farmers or huge, medium and small fowl feed processing plants. The following is a thorough introduction to the fowl feed pellet making machine. ( 1) Basic material of chicken feed pellet making maker: Feed processing machinery that directly presses pellets with crushed products such as corn, soybean meal, straw, lawn, rice husk, and so on( 2) The functioning concept of the poultry feed pellet making equipment: chicken feed pellet making equipment achieves the objective of feeding dry in as well as dry. Via the extrusion between roller and also the die plate, the temperature of 80 C can be reached throughout the manufacturing procedure, and also the pellets with smooth surface area and also consistent body can be refined. As well as have a certain solidity. Furthermore, users can choose various apertures and compression proportions according to their different needs to get the very best innovation as well as economic benefits. The poultry feed pellet making machine makes use of a electric motor as the driving shaft for power, and operates cyclically on this basis. It drives the major shaft through equipments to scrub the die plate and also the stress roller, and the resulting friction temperature level ( in between the pressure roller and the die plate) can be as much as 80 C. The raw product goes through the high temperature, under the extrusion of the pressing roller as well as the die plate, and also travels through the holes on the die plate, and also the top notch molding pellets will certainly turn out from the discharge port.
