This vegetable and fruit washing peeling machine is mainly for wahsing and peeling potato, carrot, sweet potato, cassava, taro, yam, ginger, white radish, apple, peach, etc. The round and microscler vegetables and fruits. This brush type vegetable fruit washing peeling machine is with large effective volume, high efficiency, water saving, suitable for the continuous cleaning operations.
Automatic Frozen French Fries Machine|Cassava Potato Sticks Processing Plant is mainly used to produce potato french fries using fresh potato, which can be used to process frozen french fries or pre-fried fries. The complete french fries production line is consisted of Potato washing peeling machine, french fry cutter machine, blanching machine, air dewatering machine, french fries fryer Machine, vbrate de-oil machine, air drying machine, french fries flavoring machine and packaging machine.
The complete potato chips production line/potato crisps manufacturing equipment is all made of 304 stainless steel. The same set of potato chips machinery can also be used to make plantain chips only chaging the peeling machine. 1.Elevator, 2.Washing and peeling machine, 3.Picking line, 4.Elevator, 5.Potato cutting machine, 6.Rinsing line, 7.Blanching machine, 8.Dewatering machine, 9.Oil-water mixed frying machine, 10.Vibration de-oiling, 11.De-oiling machine, 12. seasoning machine, 13. Picking line, 14. Automatic potato chips pacakaging machine.
The BW2000 model walnut processing line is design for cracking walnut and get pure kernels. The machine consisits of huller, pre-separator, un-hulled cycling system, inspection belt, kernels grading machine, et. We tested varieties like Sunland, Payne, FRANQUETTE, Eureka with very satisfactory performance. The unique three-point-cracking technology enables a precise handling to get higher yield of butterfly kernels. For more information, Please contact with our staff.
The soybean peeling machine is a patent product designed for large volume soybean food industry. The soybean peeling machine features: 1. Higher peeling rate and lower powdering. After peeling, the peel(husk or testa), cotyledon and hilum are perfectly separated. 2. Higher processing capacity: Single machine can process 100--300TPD. 3. The process route is much sorter then others. The equipment occupies less spaces with simple operation and lower power consumption. 4. Safe and easy operation and maintainence.
The machine uses high-speed rotating emery to cut and rub the soybean cortex continuously, which destroys the bonding strength between soybean endosperm and embryo, and gets high quality hulled soybeans. Used for all scale of bean peeling plant. Soybean processing plant features: 1.Scientific design, attractive appearance; 2.Advanced design, stable mechanical function, low noise; 3.Compact structure, assemble and disassemble easily; 4.Unique roller design, outstanding peeling performance; 5.Strong negative pressure peeling, neat peeling, low breakage, high accuracy; 6.Inlet and outlet can be fine-turned, easy operation; 7.Adopt oil sealing rubber skeleton, axis running smoothly and longer bearing life.
The sunflower seed processing line Model TFKH1200 is a patent product. This equipment provides an integral solution for sunflower seed kernels Industry. It combines cleaner, de-huller and separators so that the seeds can be processed without assistance of other machines. There are two de-hullers applied in this equipment, which is more efficient than its previous models. It features of little broken rate and thoroughly separation of shells. All the processes are automatically fulfilled by just pressing a few buttons. The maintenance is quite easy as well as the operation. Component There are totally 11 parts: feed-in hopper, spiral elevator, cleaner, bucket elevator, main de-hulling part, separators (3sets), in-shell seeds cycling system, kernel collecting trough and electric control cabinet.
This machine is specially designed for barley processing. Through rubbing, grinding and cutting processes, it separates skin barley kernels. It is easy to operate, high peeling performance rate, low loss or wastage, no wear parts designed to decrease the maintenance cost. It is composed of peeling chamber, pressure control system, aspiration system, and kernel receiving system. With this one machine, it can automatically finish peeling, separation, and dust control etc. The machine can also be used on beans and lentils. This machine can work independently. We can design parallel lines for larger capacity. Specification Production capacity: 500~600kg/hour Motor power: 11kw-4p Main motor speed: 1400R/M Machine net dimension: 1380x1080x2170mm Net weight: 580kg Packing size Wood case packing dimension: 1470x1180x2270mm CBM:3.94m3 Gross weight: 630kg
The equipment is our Patented product with independent intellectual property, which contains 3 national patents. It can be used to de-hull and remove shells. The seeds are processed in a continuous circle. Un-hulled seeds can be delivered automatically to next round processing. In 2011, we innovated the huller and the processing capacity enlarged by 15%. The machine is working in Bulgaria, Mexico, USA and Guatemala. In 2014 we re-designed the machine to get higher efficiency and lower cost. Welcome to contact our sales representatives. Component The equipment consists of feed-in hopper, bucket elevator, huller, shells collector, positive pressure separator, and electric control cabinet. Main parameter Power : 5.59kw /8.59Kw (380V) Integral kernels rate : 95% min. (Broken kernel is less than 1/2 of whole kernel) Content of seeds in the kernels : 2--4% max. Content of kernels in shells : 0.3% max. Production (output): 150-200kg/h Occupied area : 6.4m X 2.9m Height: 3.5m/3.7M Weight: 2.5T/3.0T Operator: 2 persons
Functions The equipment is our Patented product with independent intellectual property, which contains 3 national patents. It can be used to de-hull and remove shells. The seeds are processed in a continuous circle. Un-hulled seeds can be delivered automatically to next round processing. In 2011, we innovated the huller and the processing capacity enlarged by 15%. The machine is working in Bulgaria, Mexico, USA and Guatemala. In 2014 we re-designed the machine to get higher efficiency and lower cost. Welcome to contact our sales representatives. Component The equipment consists of feed-in hopper, bucket elevator, huller, shells collector, positive pressure separator, and electric control cabinet. Main parameter Power : 5.59kw /8.59Kw (380V) Integral kernels rate : 95% min. (Broken kernel is less than 1/2 of whole kernel) Content of seeds in the kernels : 2--4% max. Content of kernels in shells : 0.3% max. Production (output): 100-150kg/h Occupied area : 6.4m X 2.9m (TFHB150) Height: 3.5m/3.7M Weight: 2.5T/3.0T Operator: 2 persons
After processing, you will get three products:corn grits, corn powder and husk. Percentage of three products: Grits about 45-55%, Powder about 20-30%, husk and germ about 25%. Total yield: 75% Min. Specification of finished product: Fineness of corn powder: 40-150 mesh(adjustable) Meganetic metal content: 0.003g/kg max. Moisture:13.5-14.5%
This machine consists of ultra low speed, no broken elevator, vertical air screen, cyclone dedusting system, large proportion platform, vibrating and grading screen. It can remove dust, chaff, shell and other light impurities. It can also remove the blighted seed, budding seed, damaged seed (by insect), rotten seed, deteriorated seed, moldy seed, non-viable seed, seed with black powder sick. After the large and small impurities have removed, the finished product can be divided into best, medium and small particles. Features 1. This machine can replace gravity separator, reduce the load of gravity table and increase production further. 2. For the processing of wheat, rice, corn, soybean, sorghum and other commodity grains, productivity can reach 20t/h, and can remove more than 90% kinds of light impurities from grain. 3. Complete wind selection, gravity selection, screening and grading, which can save energy and reduce consumption and labor. 4. Environmental cyclone duster system and without a lot of dust leakage. 5. It can be equipped with elevator, screw conveyor and belt conveyor.
Based on the multi-module parallel processing structure, RB series color sorter has adopted latest CCD sensor, advanced optical sorting cabinet, tailor-made high speed mini-ejector system, instant video frequency control algorithm and reliable network transmission protocol. Sorting result index of the machine has been greatly improved. Touch panel display offers a friendly and informative interface. Apart from providing the normal sorting functions, the machine features largely in the following points. Main Features color sorter for sunflower seed / kernels Integrated processing system and high speed numeric processor make fine sorting result and long-term machine stability. color sorter for sunflower seed / kernels Multi-calibration, conforming arithmetic contributes to intelligent processing system. color sorter for sunflower seed / kernels Special optical system, flexible sorting modes setting available for different raw material at users disposal; exceptionally good in simultaneously sorting of yellow and milky grain. color sorter for sunflower seed / kernels Embedded operation system offers friendly interface, easy operation. color sorter for sunflower seed / kernels Adopt high-sensitivity sensor and special algorithm to effectively remove macula. For assisting the color sorter, you need to build a platform with no more than 1.5M height. Two elevators are required. We recommend our latest No-Damage-Elevator: one is Z shape, the other is C shape. One compressor is also required. Technical Parameter Channels: 240 Processing capacity: 1.0-2.0T/Hr. Sorting accuracy(%): ï¼?99.6% Optimized carryover (bad:good): ï¼?8:1 Channels preset for primary sorting and re-sorting: 160:80 Voltage: 220V(50Hz) Power Total: 2.2Kw (for sorter only) Air pressure : ï¼?0.6-0.8Mpa Air consumption:ï¼?2.5m3/min. Weight: 850kg Dimension (LÃ?WÃ?H):1920mmÃ?1410mmÃ?2040mm Note: all the performance data listed above is taken the 5% impurities sunflower seed kernels of China origin. Varietie
he soybean peeling machine is a patent product designed for large volume soybean food industry. The soybean peeling machine features: 1. Higher peeling rate and lower powdering. After peeling, the peel(husk or testa), cotyledon and hilum are perfectly separated. 2. Higher processing capacity: Single machine can process 100--300TPD. 3. The process route is much sorter then others. The equipment occupies less spaces with simple operation and lower power consumption. 4. Safe and easy operation and maintainence. 0
Buckwheat processing takes two steps: First, calibrate seeds to 7-8 grades (sizes). Then de-hull seeds separately by grades. The sheller applies disc hulling technique which can be adjusted for processing different sizes of buckwheat. Buckwheat shelling machine /buckwheat sheller Buckwheat Grading Machine CFQF800 This machine can calibrate seeds to seven grades. Vibrating motors applied are all CE certified. I. Component 1. Input hopper 2. Bucket Elevator 3. Screens II. Specifications Power: 3.4Kw, (380V,3phase,50Hz) Processing capacity: 1000kg/hr. Length*Breadth*height: 11.8mÃ?2.0mÃ?2.6m Buckwheat Shelling Machine TFQM200 The machine can de-hull buckwheat and separate shells from kernels. Those coarse bran can also be separated from kernels during this process. It applies dry method (seeds to be shelled directly with no thermal-treatment involved.) I.Component 1. Input hopper 2.Bucket Elevator 3. Hullers 4. Separator II.Specifications Power:6.44KW Output: 200-250kg/hour min. Yield of kernels:70-75ï¼? Un-hulled seeds in kernels:0.5ï¼? max. Brokens in shells:0.5ï¼? max. Length*Breadth: 5.7mÃ?2.8m Height:3.5M
After processing, you will get three products:corn grits, corn powder and husk. Percentage of three products: Grits about 45-55%, Powder about 20-30%, husk and germ about 25%. Total yield: 75% Min. Specification of finished product: Fineness of corn powder: 40-150 mesh(adjustable) Meganetic metal content: 0.003g/kg max. Moisture:13.5-14.5%
The machine's striking feature 1. Continuously processing. You don't have to wait for hours grinding to get perfect peeled beans. 2. Higher yield: nearly 80% of your input is finished product. 3. Dust-controlling designed to avoid pollution. 4. Variety adaptable: it can process several varieties of beans and lentils. If you need fully split, we can add a simple device to achieve it. We can custom-design processing line for your special demand.
After processing, you will get three products:corn grits, corn powder and husk. Percentage of three products: Grits about 45-55%, Powder about 20-30%, husk and germ about 25%. Total yield: 75% Min. Specification of finished product: Fineness of corn powder: 40-150 mesh(adjustable) Meganetic metal content: 0.003g/kg max. Moisture:13.5-14.5%
Sausage cutting machine The machine is made of high quality 304 stainless steel, the key parts are manufactured by,, machining center to ensure the machining accuracy and positioning accuracy, and the surface,, is specially treated to improve the wear resistance and corrosion resistance. This machine,, has good safety performance, reasonable design, compact structure and convenient maintenance.
Frozen meat slicer&cutter It is our newest Frozen Meat Slice.which is researched and developed by ourselves.It,, adopts international advanced technology.one piece frozen meat ot-18·c can be directly cut,, into slices.It is pre-procedure of cutting and mixing machine and meat grinder process.It,, is waterproof.washing conveniently.reliable performance.rational structure and simple to operate.
