This is an ultrasonic cutting machine for food controlled by 5-axis servo motor system, can be linked to chain slat type tunnel oven, automatic belt convey and cutting products of 600x600mm, and it equipped with automatic paper removal function optional, and security system of security door, frequency ultrasonic scan and fault indicator lamp.
Application
1. Bread cutting
2. Cut the cake
3. Cheese cutting
4. Dough cut
5. Cookie cutter
6. Gummy nougat cutting
7. Pizza cheese and butter
8. Cut frozen meat and aquatic products
9. Plant fiber, nut cutting
Other products feel free to contact us>>
Advantage:
1. Ultrasonic cutting reduces friction, fine incision, no chip, no deformation, smooth and beautiful section.
2. Dimensional accuracy: plus or minus 1mm.
3. Can be used as a stand-alone machine or embedded solution.
4. Fast and precise because of unique servo technology.
5. Advanced software to set product parameters using icons on the touch screen.
6. A high quality safety system prevents access of the cutting area during operation.
7. After the setting is completed, a key start, automatic cutting.
8. Automatically chase ultrasonic drive power, real-time tracking of ultrasonic cutting knife frequency, to ensure that the ultrasonic cutter work in a stable state, suitable for long hours of continuous work.
Technical Features
A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods.
B.Stainless steel structure, easy to clean, serve motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake, Halva Bar etc.
C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform.
D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:�±1mm
E.Machine could be customized according to the customersâ?? requirement.
F.With automatic front baffle
G.Control system: independent development of multiaxis control system
H.Multiaxis displacement driving device: Servo motor-precise positioning
I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed
J.Safety protection Grating: open to stop, proximity switch sensing device
K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection
L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade.
It is multifunctional ultrasonic cutting machine for bakery food, 4-axis servo motor control system, the size can meet the requirements of small factory or bakery house for cake/bread/cheese/dough/candy cutting, it can cut different sizes of round cake or rectangular cake under 400*600mm. Infrared inspection, frequency ultrasonic scan and fault indicator lamp make it safe for operator, as an independent working machine, it cannot be connected with production line.
Technical Features
A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods.
B.Stainless steel structure, easy to clean, sew motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake,Halva Bar etc.
C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform.
D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:±1mm
E.Machine could be customized according to the customers requirement.
F.With automatic front baffle
G.Control system: independent development of multiaxis control system
H.Multiaxis displacement driving device: Servo motor-precise positioning
I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed
J.Safety protection Grating: open to stop, proximity switch sensing device
K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection
L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade.
Advantage
1. Ultrasonic cutting reduces friction, fine incision, no chip, no deformation, smooth and beautiful section.
2. Dimensional accuracy: plus or minus 1mm.
3. Can be used as a stand-alone machine or embedded solution.
4. Fast and precise because of unique servo technology.
5. Advanced software to set product parameters using icons on the touch screen.
6. A high quality safety system prevents access of the cutting area during operation.
7. After the setting is completed, a key start, automatic cutting.
8. Automatically chase ultrasonic drive power, real-time tracking of ultrasonic cutting knife frequency, to ensure that the ultrasonic cutter work in a stable state, suitable for long hours of continuous work.
This is compact slicer machine with conveyor belt, it can meet the requirements of factory and baking home for high speed continuous cutting machine, its cut speed can up to 180 cuts/minute, can cut kinds of products such as cake, bread, cookies, nought, candy, cheese, protein bar and so on.
Technical Features
A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods.
B.Stainless steel structure, easy to clean, serve motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake, Halva Bar etc.
C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform.
D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:�±1mm
E.Machine could be customized according to the customersâ?? requirement.
F.With automatic front baffle
G.Control system: independent development of multiaxis control system
H.Multiaxis displacement driving device: Servo motor-precise positioning
I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed
J.Safety protection Grating: open to stop, proximity switch sensing device
K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection
L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade.
It uses 4-axis servo driver system, can be applied to steel slat type of cake production line, with the advantage of high output, continuous cutting, convenient operation, automatic tracking, low failure rate, and highly automated, which make it can achieves 180 cuts/minute, besides of frequency ultrasonic scan and fault indicator lamp, this type has flip detection to avoid accidents.
Technical Features
A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods.
B.Stainless steel structure, easy to clean, serve motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake, Halva Bar etc.
C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform.
D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:±1mm
E.Machine could be customized according to the customersâ?? requirement.
F.With automatic front baffle
G.Control system: independent development of multiaxis control system
H.Multiaxis displacement driving device: Servo motor-precise positioning
I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed
J.Safety protection Grating: open to stop, proximity switch sensing device
K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection
L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade.
Advantage
1. Ultrasonic cutting reduces friction, fine incision, no chip, no deformation, smooth and beautiful section.
2. Dimensional accuracy: plus or minus 1mm.
3. Can be used as a stand-alone machine or embedded solution.
4. Fast and precise because of unique servo technology.
5. Advanced software to set product parameters using icons on the touch screen.
6. A high quality safety system prevents access of the cutting area during operation.
7. After the setting is completed, a key start, automatic cutting.
8. Automatically chase ultrasonic drive power, real-time tracking of ultrasonic cutting knife frequency, to ensure that the
ultrasonic cutter work in a stable state, suitable for long hours of continuous work.
This is compact slicer machine with conveyor belt, it can meet the requirements of factory and baking home for high speed continuous cutting machine, its cut speed can up to 180 cuts/minute, can cut kinds of products such as cake, bread, cookies, nought, candy, cheese, protein bar and so on.
17458 Processed Food Suppliers
Short on time? Let Processed Food sellers contact you.
This is compact slicer machine with conveyor belt, it can meet the requirements of factory and baking home for high speed continuous cutting machine, its cut speed can up to 180 cuts/minute, can cut kinds of products such as cake, bread, cookies, nought, candy, cheese, protein bar and so on.
Name: Intelligent waste sorting and collection box
Material: cold rolled steel sheet/galvanized sheet
Thickness: 1.5 mm and 2 mm
Size: 3300 mm*800 mm*2200 mm
Purpose: Collect paper shells, plastic bottles, old clothes, metal and other recyclable garbage, and collect micro-waste for centralized treatment.
Description:
1. The box body adopts sheet metal bending and splicing, which is divided into box bottom, beam, column, panel, box top, etc.;
2. Hidden screw connection of the box, no welding, good anti-theft performance;
3. The cabinet is made of galvanized sheet and sprayed to prevent rust. The back panel uses stamping and molding shutters, which has good air permeability;
4. The panel adopts hidden electromagnetic control lock, which has good anti-theft performance and low failure rate;
5. The whole box is composed of five grids, two rectangular paper shell inserts, two round plastic bottle inserts, the middle is the display control panel, and the only red panel is the micro waste (waste battery, etc.) insert;
6. There is a corresponding trash basket inside each inlet. Give the publisher the corresponding amount by counting and weighing;
7. There is a full box-length LED light source board on the top and cameras on both sides.
Description
Magnetic Separator is to separate mud and clod from beans or other material.
The belt works with the appropriate speed, material go through a strong magnetic roller, due to the different strength of attraction between material and clod, to separate clod from material.
Working principle
The material is fed from elevator in-feed hopper, through elevator, tee joint into grain tank, then it is distributed evenly on conveyor belt through bulk grain.
Under the action of conveyor belt, the material go through two lines filtered magnet and magnetic roller (removing the ferromagnetic iron impurities to avoid these impurities touch the magnetic roller to damage the conveyor belt), the scattered material form a paraboloid after horizontal projectile.
Due to the soil block contain ferromagnetic substance, with the strong magnetic effect of magnetic roller; the movement path of soil block will be change.
Finally the material will be separated from soil block through spreader plate sorting, respectively into grain outlet and soil block outlet.
Features
1. The key components are stainless steel structure, the rest are carbon steel structure.
2. Soil block magnetic election grader can be adjusted even without transducer, which is suitable for all kinds of material.
Advantages
1, 304 stainless steel machine, good quality.
2, Magnetic strength of magnetic roller is more than 16,000 Gauss.
3, Wide magnetic surface design: 1300mm.
4, Special design of bulk grain equipment, Rapid bulk grain.
Pre-sales Service
Technical Consulting Service
Our wide product range enables us to provide most flexible, efficient and reliable equipment configurations or complete solutions for customers according to different requests and budgets.
Also we can design different solution for different demand.
2. Company and Production Line Visit
Before placing orders, customers are warmly welcome to visit us and our facility. We can also arrange the visit to our existing customers to learn the operation condition of our machines and complete plant.
In-sales Service
Reliable delivery time.
Strict quality control by in-production 100% check and test.
User manual and spare parts provided for free.
After-sales Service
Fast technical guidance for construction, installation and commission.
Necessary training for daily maintenance on site.
3 24 months warranty
4. Long life regular technical service
5. Timely solutions to problems.
Our Aaadvantage:
1.Motor: Using well-known brand motor with high-performance, protection class IP23, IP54, F class insulation.
2.Control panel: LG electric control panel, easy operation, long lifetime.
3.Displayer:LCD displayer: Multi-language display interface, clear and convenient, 24-hours all day automatic work.
4.Radiator : Shell &tube condenser with simple structure, side cover design, easy maintenance, built-in external thread copper pipe, fine sealing, strengthen heat exchange capacity.
5.Compressor: Here many international famous brands to choose, , SANYO, Copeland and so on.
6.Evaporator: Shell &tube evaporator with simple structure, side cover design, easy maintenance, built-in external thread copper pipe, fine sealing, strengthen heat exchange capacity.
Shenzhen hailingke refrigeration machinery equipment co., LTD. Is a focus on industrial refrigeration equipment, industrial temperature control equipment and plastic machinery peripheral equipment r&d/production/sales/service in the integration of modern high-tech enterprises. From its inception the company has been identified as high-quality talent to promote the development of continuous innovation strategy, in recent 10 years, by gradually bring higher technical personnel at home and abroad enterpri
Advavtage
1.Motor: Using well-known brand motor with high-performance, protection class IP23, IP54, F class insulation.
2.Control panel: LG electric control panel, easy operation, long lifetime.
3.Displayer:LCD displayer: Multi-language display interface, clear and convenient, 24-hours all day automatic work.
4.Radiator : Shell &tube condenser with simple structure, side cover design, easy maintenance, built-in external thread copper pipe, fine sealing, strengthen heat exchange capacity.
5.Compressor: Here many international famous brands to choose, , SANYO, Copeland and so on.
6.Evaporator: Shell &tube evaporator with simple structure, side cover design, easy maintenance, built-in external thread copper pipe, fine sealing, strengthen heat exchange capacity.
Application:
Reaction kettles, extrusion forming equipment, rubber forming machinery, cast film production lines, cable extrusion production lines, the dies for precise plastic molding, the dies for the compression casting of magnesium/aluminum/zinc alloy, roller pressing applied in rubber/plastic and leather industries, crude oil heating of the oil sinks on tankships, paper making industry, bottle blowing, and so on.
This Mold Temperature Control System has been designed to maintain a constant temperature, using water or oil as medium. Mold temperature controller is used to control temperature in various industrial fields.
Manual corn thresher
Model:GWW-03
Package size:29*27*16cm
Production Capacity:50-80kg/h
Net weight:4.5Kg
Suit for:Maize/corn
Feature:Easy Operation
Packing & Delivery
Packaging Mode: Iron crate, in bulk or customized.
Delivery Time: within 20-30 working days after payment.
BINHAI GROUP WORK WIN CO., LTD. is a leading manufacturer and provider of total integrated supply chain solutions. We offer the best agricultural equipments, garden equipments, and accessories.
Our main product lines: tractor series, agricultural cultivating machinery series, spraying series, harvesting machinery series, post-processing machinery series, casting and forgings series. Our farm implements could match with domestic tractor (FOTON, YTO), and foreign famous brand tractor (JOHN DEERE, NEW HOLLAND, KUBOTA etc.)
We have a multilingual team, and many big branch factories. A regional market presence-including southeast Asia, Indonesia, Russia, Spain, Chile, Brasil, Australia etc.
Group Work Win strives to build a long term relationships by providing our customers with continuous and reactive support. We aim to supply better quality products and after-sales service.
FAQ
Q1: How about your company?
A1: We are a leading manufacturer and provider of total integrated supply chain solutions for agricultural machinery.
Q2: What is the delivery time?
A3: 15-20 working days after payment.
Q3: About the package?
A4: Iron frame or iron crate.
Q4: What is the MOQ?
A5: Normally the MOQ is one set. There are some exceptions to this requirement because of the type of machines.
Q5: Can I put my brand name on your agricultural machines instead of your brand name?
A6: Yes. We could do OEM/OBM.
Q6: What about the payment terms?
A7: T/T. We also can accept other payment terms.
If you are food processing manufacturer, have the need of producting the banana chips, then you must need the plantain peeling machine to start your business. Our plantain peeling machine is the most suitable machine to begin your business. The machine can peel different size and shape of the green banana, with the transportation of conveyor belt, thus saving your time and labor. Has high capacity can be adjust according to your demand. It has easy operation, even one worker can manage a machine,so you need not worry about you can not use it. Our machine has widely used in the processing line and is more convenient to the whole production line.If you have any question,just contact me freely.
This industrial banana peeling machine is specially designed for peeling green banana in high peeling rate, the banana after peeling has smooth surface and mo damage.
Banana peeling machine advantages:
1,Need artificial fillers, 1.0 seconds to complete the work of a banana peel.
2,Can peel the green banana clearly. peel the banana pulp sleek no damage.
3,Adapts to any size, green banana peeling camber.
4,Peeled banana flesh after the separation, automatic output.
5.High peeling rate and speed.
6.High automation,saves a lot of time and labor.
This type Ripe Banana Peeling Machine is adopting manual feeding, automatic tare processing technology, green banana peel is removed quickly, equipment is divided into 4-8 groups SBC peeled per hour can peel 60 bananas, the size of the aircraft on the banana, banana camber, etc. no special requirements, the aircraft has applied for international patents.
It usually used in the production line to make the banana chips. After peeling the banana, you can cut the banana into slice, in this way, you will save energy to produce the banana chips.
Peanut butter filling machine
Type: filling machine. Condition: new. Application: apparel, beverage, chemical, commodity, food, machinery & hardware, medical, textiles. Packaging type: bags, barrel, bottles, cans, capsule, cartons, case, pouch, stand-up pouch. Packaging material: plastic. Voltage: 220v/380v, 220v 50hz 1 phase. Power: model specific. Model number: c18-1-t1. After-sales service provided: engineers available to service machinery overseas. Filling volume: 5 to 5000ml. Filling capacity: 30 to 40bph. Filling precision: 0 to 1%. Oem: available. Odm: available. Response time: within 24hrs
Automatic & semi-auto filling machine, filling and capping machine supplier, factory
Fast response oem filling semi automatic filling machine
Introduce:
Peanut butter filling machine is a high-tech product researched and developed by our company. It is suitable for products of various viscosity such as liquid washing, liquid detergent, shampoo, boy lotion, hair conditioners, liquid fertilizer, dishwashing, liquid soap, shower foams, disinfectant, glass cleaner, floor cleaner, metal cleaner, air refresher, herbal shampoo, carpet detergent etc. It is widely applied for filling of products in such industries as food, cosmetics, medicine, grease, daily chemical industry, detergent, pesticide and chemical industry etc.
Characteristic
1.The contact material issus316l/sus304and others aresus304 stainless steel
2.The machine include bottle turn table, filling, capping, labeling, print date, container machine etc.
3.It has intuitive and convenient operation, measuring accurate, positioning precision
4.Fully in accordance with thegmpstandard production and passedcecertification
5.No bottle no filling
We are one of filling machine manufacturer, we provide filling and capping machine, carbonated soft drink filling machine and soda filling machine.
