Aquaspin pivot irrigation system is applicable mainly to large farm irrigation.ti has advantages like economic efficiency,high irrigation rate,solid structure, durability and easy operation.A multi-span system runs around its pivot tower and irrigates the earth within its coverage. Diameter of the irrigation circle can reach 1200 meters with maximum number of longest spans.
Mash tun 1. Using of highly efficient miller jacket heat technology, the application of scientific principles of steam turbulence to achieve maximum heat transfer, energy-saving effects, while taking fully automated temperature control technology, to ensure the heating and the heat accuracy at the stage of the mashing process. 2. The international advanced speed control system using the variable frequency, automatic control technology to ensure the homogeneous liquid mixture mash process. This system can maximize the biological activity and conversion, catalytic effect of the enzymes in the gelatinization, saccharification process, to ensure the best quality beer and the highest yield from the source. Lauter tun 1. Using of advanced scientific farming knife shaped structure and hydraulic automatic take-off and landing system technology to ensure the uniform double slot, the smooth groove and also the improved filtering speed and production efficiency. Maintain the transparency of the wort and a good juice yield. 2. Applying with the international advanced suspension, stirring devices, with variable frequency, speed control, automatic control technology, so that the operation could be more convenient, flexible and maintenance is simple, cost-saving. Brew kettle 1. In application of advanced boiling, pressurized technology to improve the boiling intensity, greatly increased the evaporation dimethyl sulfide, promote coagulation such as proteins and other cohesive material, so that rapid separation of boiled wort and polymers. 2. By the off-pump hybrid technology to speed up the inside wort heating rate, wort is heated with an even temperature to avoid partially overheating caused degeneration phenomenon. This technology can ensure the quality of the boiled wort.
1. Expanded fish feed processing line introduction Expanded fish feed processing line is mainly made up with raw materials treatment system, extrusion system, drying system, flavoring system and controlling system. Its core technology is co-rotating twin-screw extrusion. This line can make both floating fish feed and sinking fish feed. After changing formula, it can make dry pet food (such as dog food, cat food). 2. Expanded fish feed processing line description: 2.1 Flow chart: raw materials treatment---extrusion---drying---flavoring---cooling---packing 2.2 Expanded fish feed processing line features: 2.2.1 High work efficiency, automation degree, materials usage, application range. 2.2.2 Low land occupation, power consumption, labor cost, waste rate. 2.2.3 This line is multi-function processing line, it can make floating fish fee, sinking fish feed, dog food, cat food etc. 2.2.4 Production factors can be quantified and controlled. 2.2.5 All machines and fittings can be custom-made. ODM/OEM is available. 3. Expanded fish feed samples introduction Adopting cereals, vegetable proteins, vitamins, minerals, fish meal and fish oil as raw materials, and adopting dry-type or wet-type extrusion as manufacturing technique, modern fish feed is made for both carnivorous and graminivorous fishes, which is in the form of granules or pellets situation. It improves digestibility and refining the balance of nutrients to match the needs of the different species of fish more precisely at different periods of development, improve the sustainability of the ingredients used, and improve efficiency of feeding also contributes to sustainability. -
1. Expanded pet food processing line Expanded pet food processing line is mainly made up with raw materials treatment system, extrusion system, drying system, flavoring system and controlling system. It has high stability and automatic performance, which offers the possibility to control the expansion of the extrudate through various means to control the texture of the final product. Expanded pet food processing line�??s core technology is co-rotating twin-screw extrusion. Twin-screw extruder is the core of this line, enabling the continuous production of expanded pet food. 2. Expanded pet food processing line description: 2.1 Flow chart: raw materials---extrusion---drying---flavoring---cooling---packing 2.2 Expanded pet food processing line features: 2.2.1 High work efficiency, automation degree, materials usage, application range. 2.2.2 Low land occupation, power consumption, labor cost, waste rate. 2.2.3 Various configurations and capacity choices. 2.2.4 Various finished products (such as dog food, cat food, fish feed). 2.2.5 Production factors can be quantified and controlled. 2.2.6 World-class food grade fittings. 2.2.7 All machines and fittings can be custom-made. ODM/OEM is available. 2.2.8 Professional pre-sale, sale and after-sale service. 3. Expanded pet food samples introduction Basing on modern extrusion technique, expanded pet food is made from cereals powder, meat (or meat meal), vitamins and minerals as raw materials, which is fit for different age grades and varieties pets. Compared with traditional pet food, expanded pet food has the advantages of easier high absorption, higher nutritional ingredient use ratio, longer storage time etc. The shapes and sizes can be controlled by die moulds. -
1. Artificial rice processing line introduction Artificial rice processing line is mainly made up with raw materials treatment system, extrusion system, drying system and controlling system. It has high stability and automatic performance, which offers the possibility to control the expansion of the extrudate through various means to control the texture of the final product. Artificial rice processing line core technology is co-rotating twin-screw extrusion. Twin-screw extruder is the core of this line, enabling the continuous production of expanded snack. 2. Artificial rice processing line description: 2.1 Flow chart: raw materials---extrusion---screening---drying---cooling---packing 2.2 Artificial rice processing line features: 2.2.1 High work efficiency, automation degree, materials usage, application range. 2.2.2 Low land occupation, power consumption, labor cost, waste rate. 2.2.3 Various configurations and capacity choices. 2.2.4 Various finished products sizes and shapes. 2.2.5 Production factors can be quantified and controlled. 2.2.6 World-class food grade fittings. 2.2.7 All machines and fittings can be custom-made. ODM or OEM is available. 2.2.8 Professional pre-sale, sale and after-sale service. 2.2.9 Extruder adopts cooling system to control temperature. 3. Artificial rice processing line introduction Artificial rice is a new food based on extrusion technology. Adopting rice flour, broken rice (should be milled) as main raw material, artificial rice is made by extrusion and drying processes. Artificial rice has the advantages of great taste, easy-to-cook, eutrophy, strong functionality (such as sugar-free rice, medicinal rice) etc. Right now, more and more consumers and units received artificial rice.
Double Faucets beer keg dispenser 1. Compressor Cooling 2. Seperated Cooling Tube 3. Easy Dismantle 4. Customize
This fully automatic flush pasteurizer is used for pasteurizing the liquid. The heat exchanger and pipelines are stainless steel 304. There is fully automatic CIP system and Siemens PLC control system. Features: 1. The material exchanges the heat with media in its own pipeline to ensure that the material is sanitary. 2. The pasteurization time is very short in order to keep the nutrition of the liquid. 3. The material of the whole machine is food grade stainless steel that meets the requirement of national beverage industry. 4. The heat exchange is good; the heat recovery rate is high; the energy consuming is less. 5. We use international famous brand parts for control part, valves and mating parts. The machine is more durable. 6. The process is controlled by PLC control system that controls heating temperature of the liquid, hot water temperature, steam flow adjustment in different phase. There is fully automatic liquid returning system to make sure 100% meets the sterilization quality.
Our two heads isobaric beer filling machine is a patent product. Its structure is simple and its operation is easy and convenient. It has two filling heads, so it has a high efficiency. It’s the ideal choice for smaller brewery. Before filled, CO2 will be injected to the bottle to remove the air in the bottle so that there is no air in bottle. Besides, it has soft tray which has cylinder. So the tray can lift automatically to suitable for different bottles height. The fill will be automatically stopped when the level of beer get to the standard level. Container: glass bottle Work principle: counter pressure Filling liquid: beer Suitable industry: food industry Dimension: 1000*1800*600mm Filling head: 2 Filling volume: 200ml-2L
Construction of beer fermentation tank 1. The tank body has interlayer and heat-insulating layer (for heating, cooling or heat insulating) The tank body, upper and lower closure heads(or taper) all adopt spinning r-angle processing. The internal wall of the tank has got mirror polishing with finish ra=0.4µm. 2. It has no sanitary dead corner and its wholly-enclosed design ensures that materials are always Mixed and ferment at non-pollution state. 3. Aseptic system helps avoid microorganism pollution in the air and greatly extends quality Warranty period and purity of the products. We specially designed and installed aseptic Respiratory air hole or aseptic normal-pressure fermentation system, which can finish circulating Heat-up and cooling through medium heat-up. 4. The parts that contact materials are all made of stainless steel sus304. Heat preservation adopts Polyurethane blister or pearl cotton. External surface adopts sand grinding surface polishing treatment. All is in accordance with gmp standard. Volume has different specifications ranging from 30-5000l.
Our material cutted by plasma cutting machine. Introduction for used brewery equipment • 100-5000L micro or commericial used brewery equipment are very popular among craft beer producing. • Brew master make their beer attractive to consumers by unique brewing process and distinctive beer taste. • Interpreter may be faced with polished brass, copper besides stainless steel. • The whole set equipment is completely made of sus304. the brewhouse can be made of red copper for special request. • The brewhouse can be designed as steam heating, electric heating and direct fire heating according to customers' technological requirement. • The glycol jacket of fermentation tanks adopts dimple jacket. • The jackets are provided at tank body and conical bottom to effectively increase the cooling speed. • And its heat exchanging area of jacket of different proportions can be allocated according to customers.
It can charge the lithium battery use of multi crystalline solar circuit board, also work while charging, effectively solve the problem of charging in some areas. The product has a lithium battery protection board developed by the company, solar control circuit board. Under the sunlight,. 9 hours can be filled, 8ah 12 hours can be filled with, the product is lanyue technology first, to fill the market blank automatic charging. Product features: 1 solar charge, with 15 watts of solar panels, charging efficiency of 17%, the use of life 15-20 2charge current indicator: equipped with a charging current meter, charging visible 3 over charge protection, lithium batteries are equipped with protective board, charging end automatically stop, current to zero 4 portable and high life lithium battery, life 800 times above. 5 the volume of 16 liters of spray molding barrel, the overall weight of about 4 kg. 6can be equipped with adjustable supporting pole, solar panels must be in a certain angle conversion efficiency is the highest, through the support bar to adjust angle to achieve the best efficiency. Note: 1the solar panel must be placed in the sun before it can effectively charge, solar panels can not block (or part of the block), otherwise it can not charge 2the charging efficiency and the solar panel support angle, so it can be adjusted according to the current number of the right angle 3 the solar energy conversion efficiency and light intensity of the solar panels, the higher, the cloudy day is weak, the highest at noon, the morning and evening weak. 4equipped with a lithium battery of the spray quality is lighter, easy to tilt when placed, so the charge time can be poured into the barrel in the barrel to increase the stability of the bucket. 5avoid collision, hard damage Carton
Feature of luxury brewhuose equipment: 1) Material inner :S.S 304 2) Material outer:copper 3) Heated way:electricity or natural gas. Ferric bracket or wooden case which can be safe to ship.
Material : Carbon steel , Stainless steel Quality Control : ISO 9001:2000 , CE Capacity : from 10,000 tons per year to 200,000 tons per year.
Vane-type diatomite filter can be applied for the beverage industry, sugar industry, seasoning, pharmaceutical industry, and chemical product and so on. Features of vane-type diatomite filter: 1. Sealed cover, perpendicular filter vane, compact structure, few movable part, convenient to maintenance. 2. Easy to operate, disassembling is unnecessary when cleaning and discharging, low labor intensity. 3. Superior quality of corrosion proof, long-life for use. 4. Stable operation, reliable quality, effective filtering and excellent result. 5. High production efficiency, low energy consumption and little loss of beer. Iron frame.
Features: 1. The process of washing, sterilizing, filling is finished automatically. 2. Filling volume is controlled by high-speed positioning filling skill system 3. The temperature of hot water and lye is controlled automatically. 4. Available to connect more than one machine together to reduce the investment. 5. Auto washing of the beer pipeline CIP 6. Figure statistics and display function 7. Check keg spear automatically, make sure the washing quality and filling volume. 8. Suitable for different beer keg sizes. Iron frame.
Mixing machine is suitable for producing carbonated drinks, such as lemon drink, cola, soft drink, sprite and air-contained mineral water, etc, and can adjust the productivity, proportion of water and syrup carbon dioxide. It is the main equipment of the complete beverage production system. Iron frame.
Filling Machine Product Description: SHDTWP123SHDTWP258 Filling all kinds of edible oil, such as: peanut oil, soybean oil and rapeseed oil, salad oil, sesame oil, olive oil, and so on. vial packaging, packaging is a small oil ideal automated production equipment. Technical parameters: Filling head count: 8 Filling speed :1000-2000 (b / h) Filling range :1-6 liters / 0.1-1 liters (can be customized according to user requirements) Filling accuracy: 0.5% FS Power Supply: 220/380V Pressure :0.5-1 .0 Mpa Principle features: 1, Filling machine for filling a variety of oils, such as lubricating oil, edible oil filling. 2, the model is equipped with touch-screen, conveyor belt 8 meters Frequency Control, automatic sensor-based sealer, vacuum anti-drip device. 3, the filling machine has a beautiful shape, filling, high precision, convenient adjustment and easy to operate and so on. 4, man-machine interface, directly set the filling volume; 5, PLC program control, inverter speed filling line; 6, high-precision positive displacement flowmeters, quantitative accurate and reliable;slow down after two-speed filling, to prevent liquid overflow.
Filling Machine Product Description: SHDTWP123SHDTWP258 The four automatic filling machine for liquid quantitative filling machine oil is suitable for filling viscous liquid filling a variety of oils, such as lubricating oil, cooking oil.
Filling Machine Product Description: SHDTWP123SHDTWP258 Principles and characteristics: 1, DG semi-automatic piston type single head Paste Filling Machine, developed by DG is the semi-automatic piston type filling a series of high concentrations of fluids filling the filling machine, which is driven by a cylinder A piston-and-valve three principles to extract and play high concentration of materials, and to magnetic reed switch control cylinder stroke, you can adjust the amount of filling. 2, This device has simple structure, reasonable and easy to understand, and high accuracy. 3, Reasonable design, model compact, easy to operate pneumatic part of Germany FESTO and Taiwan are used AirTac pneumatic components. 4, The material contact parts are used 316L stainless steel material, meet the GMP requirements. 5, Filling volume and filling speed can be arbitrarily adjusted, filling and high accuracy. 6, Filling, focusing instead on use of anti-drip, anti-filling drawing and lifting devices.
1:Adopted the advanced technology to keep pressure & cooling, there is also a jacket in the cone to low the temperature. Realized to low the temperature rapidly, low the parchment, low the cone. 2:Perfect cleaning condition, scientific design of the tank, head and the cone. Ensure the co2 supply, low the temperature of the beer, cleaning of the tank. Ensure the tank is connected and share with the cip system, ice water, temperature control
