1. Raw materials: Our edge banding use high quality PVC and ABS as raw materials. Imported PVC particles comply with environmental protection standards, high purity, without any other materials, and it is also more environmentally friendly. 2. Clear texture: We are now using four color printing process by single extrusion which is more different from normal transfer printing process. It can make clear texture and looks like real wood edge banding. 3.Good abrasion resistance: All of our edge band surfaces have UV, it has high color stability, no easy to fade, anti detergent. So, cleaning agent can be used. 4. Color stable: Chuangxing's edge banding is not easy to fade. It's made of pure raw material, with scientific formula and according to the SGS standard. 5. Accurate size: Chuangxing's edge banding is produced by the imported professional assembly line, with stable quality. It won't affect the processing or use due to the size deviation. 6. Colorful design: Chuangxing matches colors by computer system, we focus on keeping same color after trim, now we have more than 400 colors of copper plates available. 7. Good flexibility: Even on a small plate with bending radius, our edge banding won't have wood grain fracture. 8. Stable expansion: the size stability of our edge banding is good, there won't be any excessive shrinkage or expansion due to a large temperature difference. 9. Small glue-line: Our edge banding is in the shape of internal bending, the hot-melt glue-line is the smallest after sealing, the appearance performance is better, and the moisture resistance will be the largest satisfied while the dust is prevented from entering. 10. The back coating of our edge banding has fluorescent agent, it can glimmer under the currency detector, so it's convenient for customer to identify. 11. Easy to processing: Our back coating is suitable for all kinds of hot-melt, so we can ensure not easy to fall and the bending will be more solid. 12.Good practical performance: Our edge banding can be uniform in thickness, smooth surface, clear texture, base color and print color, without any white appearance while trimming or bending.The bottom glue also has good effect, it has low requirement of sealing temperature, so that sealing can be more convenient and quick.
Heat shrink tubing can combine various properties in a unique way Taken together, include: outstanding electrical characteristics, excellent Chemical and solvent resistance, high purity, lubricity and penetration Out of reliability. The double-layer fluoropolymer PTFE/FEP tube consists of a PTFE heat shrinkable outer layer and an FEP inner layer It is widely used and can be used with wires, cables, connectors, connectors, terminals, etc Tightly combined, with the role of moisture-proof. When the covered part is heated, PTFE contracts tightly onto the inlay while FEP melts and flows onto a solid or near-solid package, forming an extremely tight bond that can withstand maximum extension or vibration stress. double layer heat shrink tube has all the electricity of PTFE Gas, chemical and mechanical properties. Operating temperature up to 230 degrees. Our roll shrouds extend the life of the roll, enhance reliability and enhance the quality of the product. A little heat can be applied to the roll to form a layer of high strength, armor like a strong sheath, which protects the roll from chemical solvents, acids, shocks, wear, heat and moisture. It also eliminates the problem of viscous accumulation. During processing, only a convenient heat source, such as a heat gun, can be quickly and easily condensed onto the roll surface, and can be cleaned with solvents or reagents.
If your temperature requirements are up to 260�°C (500�°F), PTFE tubes (polytetrafluoroethylene) are recommended. When terminated, it can be prevented from "melting" by soldering iron. Due to its excellent dielectric properties, it is widely used in electronic and electrical services. Another major advantage of PTFE tubes is their non-stick properties, allowing the material to be transported with minimal fluid resistance. Note, however, that PTFE reacts with fluorine, molten sodium hydroxide, and molten alkali metals. We have a full range of PTFE extrusion tubes for protecting wiring or transporting fluids in critical applications. PTFE tubes are available in a variety of configurations and custom designs. PTFE tubes have inherently excellent chemical resistivity and low coefficient of friction, and their performance is superior to that of glass and graphite, making them ideal materials for fluid transport. PTFE tubes can be used with almost all industrial solvents, chemicals and corrosive materials, and can be used in high-temperature processes. It can be steam sterilized without affecting its physical properties, such as surface hardness, elongation, deflection life or load deformation. PTFE tubes are usually translucent white, however, the whiteness varies depending on batch and wall thickness size. Colored PTFE tubes are also available and are often used to simplify tube wiring during system installation.
ETFE is a fluoropolymer that is chemically and structurally similar to polyolefins (such as polyethylene) and therefore has higher wear resistance, impact resistance and crushing resistance than its perfluorinated (perfluoropolymer) counterparts -PTFE, FEP and PFA. ETFE tubes are commonly used in wire harnesses, outer film applications that require weather resistance, and tank linings that require special chemical and wear resistance. Its high tensile strength at 25 ° C also leads to higher operating pressures at that temperature.
PFA tubes (perfluoroalkoxy) have excellent cracking and stress resistance and can be used when more demanding mechanical properties are required. PFA tubes are the product of choice for applications involving extremely high chemical resistance and exposure to high temperatures. If greater clarity, flexibility and higher continuous use temperatures are required, PFA tubes are preferred. PFA tubes are rigid and have a long bending life (up to 500�ºF) and have all the conventional properties of PTFE. In the semiconductor and pharmaceutical industries, PFA HP (High purity) tubing is used in fluid handling applications that require very low levels of chemically extractable matter.
FEP tubes (polyperfluorinated ethylene propylene) are the preferred material for the production of small diameter tubes of continuous length. FEP sacrifices some heat resistance, but its chemical and dielectric properties are similar to PTFE. Tayak FEP tube is a transparent tube that is an economical choice for applications requiring chemical resistance and resistance to high and low temperature exposure. The excellent clarity of Taiyue FEP tubing makes it ideal for applications such as viewing glasses and flow monitoring. Taiyue FEP tubes have a slightly higher coefficient of friction, lower continuous use temperature, and are more transparent than PTFE. Tai Yue FEP pipes also have better gas and vapor permeability and have excellent UV transmittance ratings. FEP tubes are available in a variety of standard sizes, with custom sizes available on request. FEP tubes are also available in flexible tubes that can be ordered in a variety of size lengths, special sizes and colors to meet your needs.
HDPE Portable Ice Rink HDPE portable ice rink has specifications of 60*30m 56*26m 40*20m 20*10m, consisting of baffle and frame. The HDPE portable ice rink is made of 2m boards each, and the height is average It is 1.2m, and the HDPE portable ice rink has three parts: yellow skirting board, blue handrail and white baffle. The frame is generally made of metal iron frame or aluminum frame. The surface is treated with anti-corrosion and anti-rust treatment. The overall appearance of the ice hockey anti-collision fence looks beautiful. Generous, and has the characteristics of corrosion resistance, impact resistance, wear resistance, cushioning and shock absorption, no cracking and embrittlement under low temperature conditions, and surface lubrication. The HDPE portable ice rink is mainly made of polyethylene sheets, which are divided into white baffles, yellow skirting boards and blue handrail boards, as well as frames, outriggers. The HDPE portable ice rink has two kinds of galvanized iron pipe and aluminum pipe. The length of the white PE baffle is generally 2 meters (about 3.04 meters at the bend), the standard height is 1.2 meters, and the thickness is 8-15mm. Yellow skirting board: the length is the same as the white baffle, the height is 0.2 meters, and the thickness is 10-15mm Blue handrail board: the length is the same as the white board, the width is determined by the fence frame, and the thickness is 15mm.
Pvc edge banding, abs edge banding, pmma edge banding.
Plastic products.
Plastic items.
Plastic closure and caps.
Polyurethane liners.
UPVC profiles;plastic profiles.
HDPE geocell.Manufacture
PTFE tube, teflon tube, FEP tube, PFA tube, FEP heat shrink tube, PFA corrugated tube, spiral tube, PFA film, insulation tube, insulation film, PVDF wafer carrier, PTFE wafer carrier, PFA wafer carrier.
Plastic items.
Plastic tube.
PTFE tube.
Plastic pallet.
Food container.
