Achromat Lens Achromatic doublet lenses have significantly better optical performance than singlet lenses in visible imaging and laser beam manipulation applications. Achromat Lenses are consist of two elements, usually of a positive low-index crown glass cemented to a negative high-index flint glass that have been corrected for chromatic aberration with respect to two or more selected wavelengths. We provide achromatic lenses consisting of two elements. These lenses have considerably reduced not only chromatic aberration bust also spherical aberration and coma aberration. These are designed with respect to three wavelength 480.0nm, 546.1nm and 643.8nm. Capacity: Material: Optical glass. Diameter: 0.5 to 350 mm Diameter Tolerance: +0/-0.02 mm Thickness Tolerance: 0.01 mm Surface Quality: 10-5 Surface Figure: �/10 Centration: 1 minute or 30 Se ond Coating: Uncoated, AR and HR Specification: Material BK7 grade A optical glass Design Wavelength 480.0nm,546.1nm,643.8 nm Diameter Tolerance +0.0, -0.15 mm Thickness Tolerance �0.2 mm Paraxial Focal Length �2% @546.1 nm Centration 85% Surface Irregularity λ/4@632.8 nm Surface Quality 60-40 scratch and dig Protective Bevel 0.25 mm x 45� Positive Achromatic Lens Standard Products: Part No. f (mm) Ф (mm) R1 (mm) R2=R3 (mm) R4 (mm) tc1 (mm) t c2 (mm) f b (mm) Lens A Lens B TPA101 10.0 6.0 6.546 -4.055 -23.23 3.6 0.8 7.54 SK9 SF15 TPA102 20.0 10.0 12.32 -0.902 -25.23 3.8 1.0 17.625 BK7 SF5 TPA103 30.0 12.7 18.535 -13.49 -37.84 4.0 1.3 27.36 BK7 SF5 TPA104 40.0 12.7 25.23 -17.539 -48.75 3.4 1.3 37.778 BK7 SF5 TPA105 50.0 18.0 31.69 -22.0 -60.57 4.8 1.5 46.987 BK7 SF5 Note: Other size, material and coating are available upon request. Negative Achromatic Lens Standard Products: Part No. f (mm) Ф (mm) R1 (mm) R2=R3 (mm) R4 (mm) tc1 (mm) t c2 (mm) f b (mm) Lens A Lens B TNA101 -25 12.7 -15.6 13.09 44.16 3.0 2.67 -27.5 BK7 F2 TNA102 -40 12.7 -24.45 17.97 66.6 3.0 2.34 -42.5 BK7 F2 Note: Other size, material and coating are available upon request.
Cylindrical Lens Cylindrical lens is used to provide focusing power in one section only. For illumination or detection of light from line sources. Also used to anamorphic compression of beams and images. Especially widely used to anamorphic compression of LD (laser diode) output beam. Our cylindrical lens include fused silica cylindrical lens, CaF2 cylindrical lens, ZnSe cylindrical lens, ZnS cylindrical lens. Capacity: Material: Optical glass, Fused silica,CaF2, MgF2, Sapphire, ZnSe, ZnS Diameter: 0.5 to 350 mm Diameter Tolerance: +0/-0.02 mm Thickness Tolerance: 0.01 mm Surface Quality: 10-5 Surface Figure:/10 Centration: 1 minute or 30 Second Coating: Uncoated, AR and HR Specification: MaterialBK7 or Fused Silica Design Wavelength632.8nm Design Index: BK7n=1.5147 0.0005 Fused Silican=1.457020.00005 Surface Figurex: /2; y: 2 Diameter Tolerance+0.00, -0.15 mm ThicknessTolerance0.2mm Paraxial Focal Length2% Centration85% Surface Quality60-40 scratch and dig Protective Bevel0.25 mm x 45 BK7 Plano-Convex Cylindrical Lens Standard Products: Part No.XY (mm)f (mm)R1(mm)tc(mm)te(mm)fb(mm) TXC10110.0x10.012.76.544.32.09.8 TXC10220.0x10.012.76.544.32.09.8 TXC10310.0x10.020.010.293.32.017.8 TXC10420.0x10.020.010.293.32.017.8 TXC10510.0x10.025.012.873.02.023.0 TXC10620.0x10.025.012.873.02.023.0 Note: Other size,material and coatings are available upon request. BK7 Plano-Concave Cylindrical Lens Standard Products: Part No.XY (mm)f (mm)R1(mm)tc(mm)te(mm)fb(mm) TEC20110.0x10.0-12.76.544.32.0-14 TEC20220.0x10.0-12.76.544.32.0-14 TEC20310.0x10.0-25.012.873.02.0-26.3 TEC20420.0x10.0-25.012.873.02.0-26.3 Note: Other size,material and coatings are available upon request.
Reticule series Optical Lens Infrared Filter Geodetic Surveying series Grating, optical dial and various reticules are widely used in the geodetic surveying field. The geodetic surveying apparatus include total station, electronic theodolite, optical theodolite, laser rangefinder, automatic sight level, various field instruments, and large-scale and high-precision measuring equipment (such as satellite telemeter and aerial surveying apparatus). We produce various specifications of high-precision reticules and provide related services for each domestic and foreign measuring company, due to the high quality and competitive price, we built a well cooperation with many companies in the world. Measuring Sight series Our products have large coverage, wide variety, complicated figures and exquisite technique. The reticules we produce match the high accuracy sniping rifle telescopic sight, which is superb in numerous gun telescopic sight, they can be used in the daytime and be lighted at night. Medical Reticule series We can process and manufacture the key components for the surgical microscope, hemocytometer, medical microscope, nuclear magnetic resonance imaging apparatus, diopter inspection apparatus, and visual degree instrumentation, etc. With the powerful photomask-making technology, our products not only have high accuracy, but also have delicate designed figure. They make examination more reasonable, accurate and human. Telescope Reticule series We could produce many kinds of reticules from various kinds of reticules of Chinese-style telescope to German-style, American-style, Russian-style, Japanese-style and Czech-style telescopes; including regular flat surface chrome oxide reticule, night lighting etching reticule, transparency field reticule of bright background dark figure and night field reticule of high density dark background bright figure Line width8�m20�m, Line accuracy < �2 m, Surface defect disease: �grade, Density (D)> 3,Reflectivity( R) < 8%.
Models: LKD xx - FS - 3030-20 Angle: 15 ° 38 ° 60 ° 15 * 45°: matching LED Cree 3030 ã?�5050 diameter: 22mm/20 mm / 13.5 mm material: optical level pmma and heat-resistant: - 40 ° ~ 120 ° standard: SGS/ROHS environmental protection authentication application: landscape lighting, wall decoration, the outline outline of product characteristics:2. The matching LED has uniform light spots, no astigmatism, no black spots, no shadow transmission rate is very high, and the LED light utilization rate can be maximized.3. This product USES the high precision, aspheric optical design, original installation import optical PC raw materials, to ensure enough injection molding (reduce shrinkage products) we have good quality, and strict with product, all conform to the country and the export standards, the product USES the antistatic shockproof packaging.All products have passed SGS certification and meet ROHS environmental requirements.
Aspherical lens Glass aspherical lens is also called condenser lens, mainly applicale for stage lighting, optical lighting system, etc. We ring in hot riquetting technology from japan, with volume production aility, including aspherical lens such as aspherical lens, 20 aspherical lens, pyrex aspherical lens which surface form error is within 00 micron. Specification: Material, 20 or pyrex Diameter range0-300mm Diameter tolerance+0.00/-0.5mm Center thicness+/-0.5% Focus+/-% Aspheric lens face formCheced y caliper Surface finish: processing surface/2; y: 2 Standard products: Part no.MaterialEflOdOd2CtEt Tca0208.5240.4.54 Tca02Pyrex3.50232.5 Tca03Pyrex36.452242 Tca04204.43530.680.052.3 Tca05Pyrex485092 Tca06Pyrex6.868.524.22 Tca0206.256.52.690.942 Tca08Pyrex26.554.252.8 Tca092090.805.243.8
Rod lens Rod Lens is designed for use in a variety of laser and imaging applications. The addition of this product line is part of a continued effort to support current trends toward miniaturization. Our rod lens include fused silica rod lens, MgF2 rod lens, ZnSe rod lens. Application: Optical Measurement System Projection Optics System Imaging Optics System Astronomical Optics Capacity: Material: Optical glass, Fused silica, CaF2, MgF2, Sapphire, ZnSe, ZnS Diameter: 0.2to 350 mm Diameter Tolerance:0.00/-0.002mm CylindricalSurfacefigure:2 @632.8nm (Standard), up to /4 @632.8nm Surface Quality: 10-5 Coating: Uncoated, AR and HR Please see our stock,you can find many standards rod lens.
Ball lens Spherical ball lenses are widely used in optical measurement systems, projection & imaging optical systems. Also for laser collimating and focusing, laser-to-fiber coupling, fiber-to-fiber coupling, and fiber-to-detector coupling. We provide all kinds of ball lens such as ZnS ball lens, fused silica ball lens, MgF2 ball lens and so on. Capacity: Material: Optical glass, Fused silica, Silicon, Germanium, CaF2, MgF2, Sapphire, ZnSe, ZnS Diameter: 0.2 to 500mm Diameter Tolerance: +0/-0.02 mm Sphericity:0.001mm Surface Quality: 10-5 Specification: MaterialBK7 grade A, B270, UV grade Fused Silica, Sapphire etc. Diameter Tolerance0.05mm (Standard), up to +0.000/-0.002mm Sphericity0.005mm (Standard), up t o +/-0.6um Surface Quality60-40 S/D (Standard), up to 20-10 S/D Coatinguncoated
Candela Mini Gentlelase Lens mini slider lens UJ optics provides Cynosure Lens Focus Lens, Light Age EpiCare Lens, also Candela Lens Candela Focus Lens Candela Focusing Lens. The surface polishing quality and coating of these lenses are excellent and will work for 755nm and 1064nm or both 755nm &1064nm.
PL/CX Lens, AR755&1064nm ndela Laser 40mm GLP 12,15,18mm Hand Piece Lense Replacment 8050-00-1540 UJ optics provides Cynosure Lens Focus Lens, Light Age EpiCare Lens, also Candela Lens Candela Focus Lens Candela Focusing Lens. The surface polishing quality and coating of these lenses are excellent and will work for 755nm and 1064nm or both 755nm &1064nm.
UJ optics provides Candela Lens Candela Focus Lens Candela Focusing Lens, also Cynosure, Light Age. The surface polishing quality and coating of these lenses are excellent and will work for 755nm and 1064nm or both 755nm &1064nm. Laser manufacturers use the focus lens in order to adjust the size of the laser so it can travel from the laser head, to the fiberoptic, the handpiece and finally reach the patientâ??s skin. It is very important that the focus lens are spotlessly clean, free of dust and scratches. Dust and scratches on their surface will cause the laser to burn them gradually, prevent full laser emission, and can misdirect part of the laser, which can cause other components to be burned. We strongly recommend keeping the focus lens in good condition. Additionally, keep your work area spotlessly clean in order to avoid dust particles which can be detrimental to aesthetic laser equipment. These are premium and quality custom made focus lenses that are made exactly by the manufacturers requirements. These focus lenses have been applied with AR coating to achieve optimum durability and transmitting of the laser beam. This will create better treatment results and allow your machine to be more time efficient. Yangzhou UJ Optical Element Co.,Ltd. Contact: Aglaia Huang; Email: aglaia.huang@ujoptics.com; Tel: +86-514-82829985 Slider Windows for Candela Cynosure Catalog Item No. Diameter (mm) Thickness (mm) Wavelength (nm) UJBLFSD12.5T1 12.5 1 AR755 UJBLSAD14.5T1.5 14.5 1.5 AR755 UJBLFSD15.75T1.1 15.75 1.1 AR755 or AR1064 or Both UJBLSAD15.75T1.1 15.75 1.1 AR755 or AR1064 or Both Focus Lens for Candela Cynosure Light Age Catalog Item No. Diameter (mm) Focal Length (mm) Wavelength (nm) UJBLD11F20 11 20 AR755&1064 UJBLD12F15 12 15 AR755&1064 UJBLD12F24 12 24 AR755&1064 UJBLD12F25 12 25 AR755&1064 UJBLD12F36 12 36 AR755&1064 UJBLD12.7F15 12.7 15 AR755&1064 UJBLD12.7F20 12.7 20 AR755&1064 UJBLD12.7F30 12.7 30 AR755&1064 UJBLD12.7F40 12.7 40 AR755&1064 UJBLD15F20 15 20 AR755&1064 UJBLD15F25 15 25 AR755&1064 UJBLD15F40 15 40 AR755&1064 UJBLD18F30 18 30 AR755&1064 UJBLD18F36 18 36 AR755&1064 UJBLD25.4F35 25.4 35 AR755&1064 UJBLD25.4F40 25.4 40 AR755&1064 UJBLD25.4F50 25.4 50 AR755&1064 UJBLD25.4F50.8 25.4 50.8 AR755&1064 Support Customization, other size can also be made. Welcome to contact us.
PL/CX Lens, AR755&1064nm ndela Laser 20mm GLP 12,15,18mm Hand Piece Lense Replacment 8050-00-1520 UJ optics provides Cynosure Lens Focus Lens, Light Age EpiCare Lens, also Candela Lens Candela Focus Lens Candela Focusing Lens. The surface polishing quality and coating of these lenses are excellent and will work for 755nm and 1064nm or both 755nm &1064nm.
high quality and low price , logo,color and specification can be customized
Visual sorting machine, optical sorting machine.Manufacture
Optical Lenses , Glasses, Sunglasses, Frame , Glasses Box, Cleaning Cloth, Classes Pouch, Contact Lenses, Contact Lenses Travel Case..Worldwide Shipping
Optical Whitening Agent.
BWD 01 Water Decoloring Agent.
Cooling agent ws 23, cooling agent ws 3, cooling agent ws 12, cooling agent ws 5.Export
Defoaming agent chemical liquid.
Optical brightener.
Optical brightener.
