1. Product Introduction: This product is belong to C9 category. It has the properties of good mutual solubility, water resistance, ethanol resistance and chemical resistance. It has good chemical stability over acid and alkali, good adhesive strength and good thermal stability etc. 2. Application: This product is suitable for paint.
GLPOLY Thermal Gel Provides Equivalent Performance To Fujipoly SPG-30B, Only GLPOLY Promise. Many rivals claimed that their products were alternative to other brand of products, especially the top class ones, so it seemed like it was very easy to find an analogue in local Chinese market. But in reality, customer could not find a appropriate one from dozens of anologues, for example, one product had a good thermal properties but the physical properties unqualified. GLPOLY thermal interface materials provided excellent integrated performance which was comparable to world class brands. A power supply company contacted me and asked if we can provide an anologue of Fujipoly SPG-30B, I said it was available. â??Donâ??t get so definite yet, though thermal conductivity of Fujipoly SPG-30B was 3.0W/mK, it was not very high, we still could not find a similar product with appropriate flow speed and high reliability, I had tested several products already.â?? I understood what customer concerned about. Definitely, Fujipoly SPG-30B was excellent thermal putty with high performance and reliability. GLPOLY studied this material three year ago and launched thermal gel XK-G30 which provided equivalent performance and properties. I received lots of feedback that most of anologues could provide similar thermal performance but failure to flow speed or dispensing process. According to customerâ??s application requirements, I recommended thermal gel XK-G30 and suggested customer test samples in real conditions. Test lasted for four weeks in high temperature, changes of parameters of GLPOLY XK-G30 thermal putty were within 5%, definitely GLPOLY XK-G30 could substitute for Fujipoly SPG-30B. Customer satisfied with XK-G30 and promised to push product switching asap. We havnâ??t had quality complaint for two years since we started business. GLPOLY had introducd automated production lines to eliminate human error and keep consistency of products. GLPOLY has partnered with NIO Auto, GAC New Energy Auto, Freetech, dJI etc top class brands for years, and is able to competing with world class brands, and strived to exceed world class brands.
GLPOLY performance thermal gel has features and benefits: 1. GLPOLY Thermally conductive adhesive has bonding strength 8MPa, bonding strength of competitive products is less than 5MPa; 2. Particle size is as small as 1�¼m, 30% smaller than peersâ??, filling rate is 20% higher than that of peers; 3. Supplied in one-component, non-curing, wetting-out interface, decreasing thermal resistance; 4. Compatible with high volume, automated dispense processes; 5. Conforms under low pressure, decreasing stress on component thus decreasing component failures; 6. The first one that imports automated production lines, eliminating human error;
Classification: Carboxylic Acid CAS No.: 112-80-1 Other Names: soyabean oil residue Place of Origin: Liaoning, China Grade Standard: Industrial Grade Purity: 99.7% Appearance: Black & Dark Brown Viscous Liquid Application: machinery produce , fat oil , elding oil Brand Name: DLDP Model Number: DLDP Apperance: Black & Dark Brown Viscous Liquid Acid Value: 46-55mgKOH/g Saponification Value: 155-178 mgKOH/g Moisture: 0.3% Max Moisture & Impurity: 0.5% Max
Soy wax is a vegetable wax made from the oil of soybeans. After harvesting, the beans are cleaned, cracked, de-hulled, and rolled into flakes. The oil is then extracted from the flakes and hydrogenated. The hydrogenation process converts some of the fatty acids in the oil from unsaturated to saturated. This process dramatically alters the melting point of the oil, making it a solid at room temperature. The leftover bean husks are commonly used as animal feed.
Greatland Chemicals, one of the biggest paper chemicals manufacturer from China. We produce AKD wax with high purity 91%min, 2% higher than others in the market. Quality can compete with Kamira with better cost performance. We can help you to establish AKD emulsion production lines. Based on our advanced technology and professional service. We have helped more than 40 customers establish AKD emulsion production lines.
CAS: 8030-30-6 EINECS(EC#): 232-453-7 Molecular Formula: C6H6 abby(at)gxsjjck dot cim erin(at)gxsjjck dot cim Formula Weight: 78.11184 Appearance: Reddish-brown mobile liquid Hazard Class: Quality standard: USP Version: May 03 2020
Clary sage oil Product: clary sage oil thujone 60% by gc Botanical resource: salvia sclarea l. Plant description: a bitter, astringent, warming herb. Anti-spasmodic, digestive, nervine, stimulates the uterus and estrogen production. Controls vomiting and is traditionally known as an aphrodisiac. The common name clary, 'clear eye', comes from the folk medicine use of the plant's mucilaginous seeds to reduce inflammation of the eye. In germany the plant is called muskateller salbei. It has been used as a flavoring in muskatel wine. Product colour: off-white to amber colored solid, the odor has a faintly woody characteristic, balsamic and amberlike. Uses Clary sage oil is calming to the nervous system, particularly in cases of depression, stress, insomnia and deep seated tension. It furthermore is a good tonic for the womb and female functions in general, such as painful periods, scanty menstruation and relaxation during labor, thus encouraging a less painful birth. During menopause, clary sage oil can help reduce hot flushes, night sweats, palpitations, irritability, as well as headaches and dizziness 25kg/drum
LinTon X series engine is specially developed for the needs of fixed wing aero-jetaircraft with stable performance and features1, ECU control system: built-in system to solve the trouble wiring way and improve the systemstability, one button/one bar start, convenient and fast.2, brushless start system: start mute, start fast.3, brushless oil supply system: brushless oil pump, low vibration, stable oil supply, uniformacceleration.4. Ground handling monitoring system: 3.5-inch touch color screen, clear image and convenientadjustmentã??5. Engine material selection: the material selected is aviation grade, not stainless steel, bearing isimported from Germany GRW original package. Note: when installing or uninstalling the engine, hydraulic system (including engine inlet oil, oil pump in andout of the mouth, tubing) when there is no connection, must be in a closed state.Otherwise tiny materialinto the engine or pump, cause other problems such as lower oil plug cannot be started life Warm promptIf the oil pump is stuck due to the impurities inhaled, please send it back for maintenance orcontact the manufacturer to remove the impurities by yourself.When the new machine is installed, the oil tank and tubing must be cleaned carefully. The outletof the oil pump must be filled with oil filter.When removing the engine, oil pump or feed system, a smallsection of tubing must be used to seal and plug to prevent impurities from entering the engine or oilpump.Even very small amounts of impurities entering an engine or pump can lead to clogged fuel linesand unexplained stalling.The main factors affecting engine life are: dirty fuel, illegal operation, excessive temperaturecaused by extreme use.Heavy drop, power off, heat dissipation by manual meansAfter starting the engine, the power should be cut off after heat dissipation. If the power is cut off,heat dissipation will directly affect the life of the bearing.Before starting, carefully check whether there are other foreign matters before the engine air inlet.Once the engine inhales or falls into foreign matters, it may lead to blade damage or even explosion. Ifthe blade is damaged, it should be returned to the factory for cleaning, maintenance and dynamicbalance, otherwise the engine life will be affected.Check oil filters and other equipment regularly when using the engine.Check whether all theconnectors are correct before power on!The circuit board will burn if the power is connected in reverse.
1.High molecular weight and narrow molecular weight distribution , without any low molecular substances. 2.High viscosity, good lubricity and transmission shear force. 3.Balance the lubrication and dispersion. 4.Low thermal weight loss and good thermal stability. 5.No migration and precipitation. 6.Through SGS,REACH,ROHS and other certification.
This machine applies to various ropes and bobbin tapes waxing and polishing. The equipment can complete waxing and drying at the same time. Waxed and dried shoelaces and other ropes have gloss and good hand feeling, and their gloss and hand feeling can be adjusted as required.It also can set a fixed temperature to automatically control electric heating, so as to avoid damaging the machine due to overheat. This machine uses a three-spindle winding brush drum for waxing and polishing, so that shoelaces become brighter. The new-type quick brush release mechanism makes it easy to replace a brush, for glue won't be frozen. Characteristics: - The bearing protecting cover may effectively prevent wax oil from permeating and freezing - The quick brush release mechanism makes it convenient to replace the brush - The brush can be adjustable with frequency conversion - Protection for the condition there's no ropes or bands and know tying to ensure product quality (optional) - Electric heating and air drying (optional) - Automatic electric-heating temperature-controlled cabinet(optional)
Alloy 75 (UNS N06075, Nimonic 75) is a 80/20 nickel-chromium alloy with controlled additions of titanium and carbon. Nimonic 75 has good mechanical properties and oxidation resistance at high temperatures. Alloy 75 is most commonly used for sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures. Alloy 75 (Nimonic 75) is also used in gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering.
1.Used as excellent external lubricant in pvc profile, , pipe, pipe fitting, foam board, wpc products , etc. It has good late-period lubricating ability , and will bring more glossy appearance and lower processing torque. 2.Used as efficient dispersant in masterbatch , filled masterbatch, modified masterbatch and functional masterbatch. It makes the products inorganic components and pigments dispersed better, and get more beautiful appearance . 3.Used as excellent external lubricant in pvc stabilizer , especially in ca-zn stabilizer. Additional use suitable inner lubricant, it will highly improve the overall effect of stabilizer and increase the cost-effective correspondingly. 4.Used in hot melt adhesives can better adjust the products viscosity and hardness, improve its fluidity. . 5.Used in paint, coating and the road marking paint, its main performance is heat resistance, deforming , leveling, anti-setting and dispersion. It can increase the products surface hardness, wear-resistance and anti-smearing properties. 6.Used as modifier in paraffin wax, and improve the paraffin`s melting point , crystallinity , etc. 7.Used as releasing agent and protective agent in rubber . -
We are the leading manufacturer of carbon black in china. We produce series carbon black for rubber and plastic use, such as n121, n219, n220, n234, n326, n330, n339, n375, n550, n660, n762, n774 etc. We have got iso9001:2000 certification. If you are interested in our products, I will give you professional service. Compound craft/ woven bag
T5126, hydraulic oil additive package, meet the performance requirements of major hydraulic equipment manufacturers which include ep anti-wear additive, antioxidant and antirust. With excellent thermal oxidation stability, filterability and demulsibility in the vane pumps and systems, t5126 has the capability to provide anti-wear performance reserve in a finished hydraulic fluid, suit for mineral and synthetic base oil with dosage of 0.8-1.2%.
T321a, new type sulfurized isobutylene without chlorine using new technology, with high sulfur content have unique solubility in mineral oils, excellent extreme pressure (ep) property and thermal stability, can be utilized in a variety of formulations in combination with other chemical components, to prepare lubricants meeting various performance requirements for gear oil, metal working oil, grease and anti-wear hydraulic oil. The reference dosage is 1.0-10%.
T5128 additive package for ashless hydraulic oil is new type compound additive usded in preparing high grade ashless aw hydrarlic oil with dosage at 0.6-0.8%. The product should be packed, marked, stored, transported and accepted on delivery according to sh0164. It is nonflammable, inexplosive and incorrosive. When storage, transportation and blending, the highest temperature should not exceed 60â??. The ambient temperature should not exceed 50â?? for long-term storage. Protective articles should be used. Do not contact skin.
T4216 is one high grade gear oil additive package. This grade package reaches the requirement of api gl-5/gl-4/gl-3 grade gear oil and heavy duty industry gear oil as well. With 4.2% dosage gl-5 gear oil have past crcl-42, crcl-37, crcl-33, crcl-60 bench test, match uss-224, amga250.04 requirement.
T3269 universal engine oil additive package has good dispersancy and anti-oxidation property which is composed of synthetic sulphonate, ashless dispersant, anti-oxidant and corrosion inhibitor. T3269 meets api performance categories through sl/ci-4 to cf-4. The reference dosage is 11.0%- 7.0%.
