Carbon black n220 Characteristic: good abrasion resistance and crack resistance. Its stress at definite elongation is lower. Application: enhanced carbon black; tire tread, high quality industrial rubber products and high load conveyor belt. Carbon black n330 Characteristic: good abrasion resistance and middling lag. Application: tire belted layer; tire side; outer layer of roller; industrial rubber products; car tire tread. Carbon black n550 Characteristic; it boasts the best reinforcing performance among the semi-reinforcing varieties, excellent extruding performance as well as low resilient rate. Application: tire body and inner tire compound; tube; extruding bar, seal and mould rubber product. Carbon black n660 Characteristic: it features lower reinforcing ability, smaller structure, higher lips expansion and greater fill amount. Application: tire body and inner tire compound; normal mould and extruding application; monolayer moisture proof product. Packing: 25 kgs in net pp bag, 16mt in the 20¡¯fcl Delivery time: 2 weeks Payment term: t/t, l/c. 25 kgs in net pp bag, 16mt in the 20¡¯fcl.
Properties: it is fine-grained or powder with colour of pure black. It mainly contains carbon, but also contains a small amount of hydrogen, oxygen, sulfur, ash, tar and water. It is insoluble in water or ethanol. Application: It is used for making high, middle and low grade ink, paint, printing, dyeing, rubber reinforcing agent, filler plastic products and also used for rendering, anti-ultraviolet light or conductive productions. 25kg PP Bag, 12MT per 20FCL for solid; 16MT per 20FCL for powder
Activated carbon.
Activated carbon 25kg/bag, or 500kg/bag
Coal activated carbon 25kg/bag, or 500kg/bag
1. Product name: carbon black (n326, n330, n339, n347, n351, n375) 2. Common name: haf (high abrasion furnace black) 3. Cas no.:1333-86-4 4. Appearance: black powder or granule 5. Grades: n326 carbon black, n330 carbon black, n347 carbon black, n351 carbon black, n375 carbon black 6. Technical index: Item Index N326 N330 N339 N347 N351 N375 Iodine absorption g/kg 82ía7 82ía7 90ía7 90ía7 68ía7 90ía7 Dbp absorption 10-5m2/kg 72ía7 102ía7 120ía7 124ía7 120ía7 114ía7 Dbp absorption of compressed sample 10-5m2/kg 62 ~74 80~96 91~107 91~107 87~103 88~104 Ctab 103m2/kg 74~92 73~91 84~102 78~96 64~82 87~105 Stsa 103m2/kg 76ía9 75ía9 88ía9 83ía9 70ía9 91ía9 Nsa 103m2/kg 71~85 71~85 84~98 78~92 64~78 86~100 Stain strength % 103~119 96~112 103~119 97~113 92~108 106~122 Heating loss % ín2.5 ín2.5 ín2.5 ín2.5 ín2.5 ín2.5 Pour density kg/m3 455ía40 380ía40 345ía40 335ía40 345ía40 34ía40 300% fix stretch stress -3.9ía1.6 -0.9ía1.6 0.6ía1.6 0.2ía1.6 0.8ía1.6 0.1ía1.6 7. Average diameter: 25~35nm 8. Specific surface area: 73~108m2/g 9. Oil absorption: 78~125cm3/100g 10. Usage: it is mainly used in tyre tread, tyre body, tire sidewall, various kinds of rubber item and conveyer belt 11. Supplier: as the responsible supplier of carbon black n326, n330, n339, n347, n351, n375: henan kingway chemicals co., ltd 25kg net craft paper bag with pe bag inside
N220 Iodine-absorption Number, g/Kg121í+5 DBP Absorption (10-5 m3/kg )114í+5 Compression DBP absorption (10-5 m2/kg)90í½105 Nitrogen Surface area Absorptive(103m2/Kg)109-129 Surface of CTAB absorption rate (102 m2 / kg )102í½121 Ash Content%0.5 45ª¦m Sieve Residue,%í_0.10 150ª¦m Sieve Residue,%í_0.02 Surface of He absorption rate (102 m2 / kg)112í½126 Tint Stregth( %)105~125 25kg net bag, 16MT in 20 FCL
N220 Iodine-absorption number, g/kg121f5 Dbp absorption (10-5 m3/kg )114f5 Compression dbp absorption (10-5 m2/kg)90f+105 Nitrogen surface area absorptive(103m2/kg)109-129 Surface of ctab absorption rate (102 m2 / kg )102f+121 Ash content%0.5 45¼8m sieve residue, %fn0.10 150¼8m sieve residue, %fn0.02 Surface of he absorption rate (102 m2 / kg)112f+126 Tint stregth( %)105~125 N330 Iodine-absorption number, g/kg 82f7 Dbp absorption (10-5 m3/kg ) 102f7 Compression dbp absorption (10-5 m2/kg)78f+98 Nitrogen surface area absorptive(103m2/kg) 73-93 Surface of ctab absorption rate (102 m2 / kg )73f+91 Ash content% 0.5 45¼8m sieve residue, %fn0.10 150¼8m sieve residue, %fn0.02 Surface of he absorption rate ( 102 m2 / kg )71f+85 Tint stregth( %)95 ~ 111 N550 Iodine-absorption number, g/kg 43 f 6 Dbp absorption (10-5 m3/kg )121 f 7 Compression dbp absorption (10-5 m2/kg)77f+93 Nitrogen surface area absorptive(103m2/kg)34-50 Surface of ctab absorption rate (102 m2 / kg )35f+49 Ash content% 0.5 45¼8m sieve residue, %fn0.10 150¼8m sieve residue, %fn0.02 Surface of he absorption rate ( 102 m2 / kg )34f+46 Tint stregth( %) -- N660 Iodine-absorption number, g/kg 36 f 6 Dbp absorption (10-5 m3/kg )90 f 7 Compression dbp absorption (10-5 m2/kg)66f+82 Nitrogen surface area absorptive(103m2/kg)27-43 Surface of ctab absorption rate (102 m2 / kg )29f+43 Ash content%0.5 45¼8m sieve residue, %fn0.10 150¼8m sieve residue, %fn0.02 Surface of he absorption rate (102 m2 / kg)29f+41 Tint stregth( %) -- 25kg net bag, 16mt in 20f+fcl
We manufacture Activated Carbon Granules in all standard mesh sizes like 4 x 8, 6 x 12, 8 x 16, 8 x 30, 12 x 40 & 20 x 50 with different Iodine Value from 400 to 1200 as per the customers requirements. Usage: It mainly used for purification and de-odor of a variety of waters, in electric power plant, petrochemical, textile, sugar refining, food and beverage, industrial wastewater, air treatment, pharmaceutical industry etc. Packaging: 25-350 kg/bag
This product is used as raw materials of the cuttings to phosphoric acid as activating agent refined from high temperature activation. Iodine value: í¦ 1000mg / g, caramel Decoloration í¦ 100% g, ash: í_ 6%, pH :3-5, Chloride í_ 0.05%, Iron í_ 0.05% Medium Macroporous high for the food, pharmaceutical and chemical industries, environmental protection industry decoloration, purification, purifying and so on . Packing: (1)500kg/bag 2í-500kg/pallet . (2)25kg/bag 40í-25kg=1000kg/pallet. Test standardú¦National standard of granular activated carbon GB/T770-1997 .
Ganular activated carbon from coal for water purification The product with appearance of black powder(or granular powder),is using high quality granular carbon as raw materials,and is made by phyically activating method.It is non poisonous,tasteless.With rich holes in it and reasonable distribution of three kind holes.It has no soluble matter in water which is not good for water quality.It is characterized by strong adsorptive power .Speedy filtering.effectively absorbing harmful matters in big and small molecular structure.It is widely used in drinking water treatment industry,polluted and waster.water cleaning,river water cleaning and depth improvement,super putt water-making in electrodes and pharmacy,water-purification in food industry. Packing:íí(1)500kg/bag 2í-500kg/pallet . (2)25kg/bag 40í-25kg=1000kg/pallet. Test standardú¦National standard of granular activated carbon GB/T770-1997.
Carbon black N220 n330 n550 n660 n774 n990 20kg/bag , 25kg/bag, 700kg/ pe bag
We are manufacturer and exporter of carbon black and zinc oxide in china.We supply all series of carbon black: n220, n219, n330, n339, n375, n660, n550, n234, n774 and zinc oxide(from 99% to 99.8%) and caustic soda(96%, 99%). The products are mainly used in the cord fabric ply, the tire tube, bicycle, rubber tube, tape, electric cable, shoes and rolling product, plastic model product and so on. 20kg/bag, 25kg/bag
Carbon black pigment and granular carbon black, good price, iso9001--2008, iso14001--2004. Our capicity is over 50, 000 tons in 2008.
Dia:1.5mm, 2mm, 3mm, 4mm 25kg 50kg etc.
Pellet size 4 mm 1)impregnated with potassium hydroxide 7% 2)impregnated with potassium iodine 2% and sodium hydroxide 3% 3)impregnated with potassium iodine 2% 4)impregnated with phosphoric acid 5)impregnated with sulphur 13% 25kg, 50kg, etc.
8x30mesh, 12x40mesh 25kg, 50kg, etc.
Carbon additive grade 1 grade 2 grade 3 (f.C.) 95% min 93% min 90% min ( s. ) 0.2% max 0.2% max 0.3% max (v.M.) 1.0% max 1.0% max 1.0% max (moisture) 1.0% max 1.0% max 1.0% max . Packing:in 1mt pp woven bag Size: at buyer's option.
Appearance: Black powder or granular Specification: Iodine Absorption Number (g/Kg) : 121+/-5 DBP Absorption number (10-5M3/Kg) : 114+/-5 DPB Absprption Value of compressing sample (10-5M3/Kg): 93-107 CATB Surface Area (103M2/Kg) : 106-116 Nitrogen Surface Area (103M2/Kg): 114-124 Tinting Strength : 110-120% Heating Loss: 3.0 max Ash : 0.5% max Tensile Strength: -0.8 MPa min Extension%: 10Min Map Modulus at 300%: -2.5+/-1.3. Packing: 25kg/bag, 16MT/ 20 FCL
Our company is a professional manufacturer and exporter of Chemicals raw materials, specialized in Carbon Black N220/330/550/600. Here with please find our specification as follow: Carbon Black N220 Appearance: Black powder or granular Specification: Loding Absorption Number (g/Kg): 114-128 Absorption Value of DBP(10-5M3/Kg): 109-119 Absprption Value of compressing sample DPB (10-5M3/Kg): 95-105 Adsorptive Specific Surface Area of CATB (103M2/Kg): 106-116 Adsorptive Specific Surface Area of Nitrogen (103M2/Kg): 114-124 Tinting Strength: 110-120% Heating Loss: 2.5% max Ash: 0.5% max Tensile Strength: -0.5 MPa min 300% Extending stress: -2.5~ -0.5MPa Carbon Black N330 Appearance: Black powder or granular Specification: Loding Absorption Number (g/Kg): 77-88 Absorption Value of DBP(10-5M3/Kg): 97-107 Absprption Value of compressing sample DPB (10-5M3/Kg): 83-93 Adsorptive Specific Surface Area of CATB (103M2/Kg): 77-87 Adsorptive Specific Surface Area of Nitrogen (103M2/Kg): 78-88 Tinting Strength: 98-108% Heating Loss: 2.5% max Ash: 0.5% max Tensile Strength: -0.5 MPa min 300% Extending stress: -2.0~0 MPa Carbon Black N550 Appearance: Black powder or granular Specification: Loding Absorption Number (g/Kg): 39-47 Absorption Value of DBP(10-5M3/Kg): 116-226 Absprption Value of compressing sample DPB (10-5M3/Kg): 83-93 Adsorptive Specific Surface Area of CATB (103M2/Kg): 38-46 Adsorptive Specific Surface Area of Nitrogen (103M2/Kg): 38-46 Heating Loss: 1.5% max Ash: 0.5% max Tensile Strength: -3.5 MPa min 300% Extending stress: -2.0~0 MPa Carbon Black N660 Appearance: Black powder or granular Specification: Loding Absorption Number (g/Kg): 32-40 Absorption Value of DBP(10-5M3/Kg): 85-95 Absprption Value of compressing sample DPB (10-5M3/Kg): 71-79 Adsorptive Specific Surface Area of CATB (103M2/Kg): 32-40 Adsorptive Specific Surface Area of Nitrogen (103M2/Kg): 30-40 Heating Loss: 1.5% max Ash: 0.5% max Tensile Strength: -3.0MPa MIN 300% Extending stress: -3.5~1.5 MPa
