There are two main types of aviation fuels used by airlines around the world: aviation gasoline and jet fuel, which are suitable for different types of aircraft engines. Aviation gasoline is used as fuel for piston type aviation engines. Due to the fact that jet fuels commonly produced and widely used both domestically and internationally belong to the kerosene type, they are commonly referred to as aviation kerosene, abbreviated as aviation coal.
Separated by the melting point, the paraffin wax is usually at 2 C, as in us: 54-56 C, 56-58 C, 58-60 C, 60-62 C, 64-66 C. All types of wax products must withstand cold well for paraffin wax, which means that it does not melt or soften and does not deform at a specific temperature. Depending on the conditions of use, locations and seasons of use, as well as differences in the method of use, commercial paraffin wax is required for a series of different melting levels. Separated by oil knowledge, it can often be divided into: Fully refined paraffin, Semi-refined paraffin, and Crude wax. In addition, paraffin wax needs to be heat resistant, oil resistant and light resistant, otherwise the color will turn yellow after application. Excessive oil exposure impairs the color and stability of the paraffin wax, and also reduces its hardness. The main factors that affect the stability of paraffin wax are its non-hydrocarbon compounds and the low concentration of hydrocarbons.
Product Name: Palm Wax Type: Industrial Grade Origin: China AUCO No.: 998 Packing: 25kg bag Items Standard Acid value, (mg KOH/g) 6.0 Peroxide value, mmol/kg 1.5 Free Fatty Acids 0.1 Colour (Lovibond colorimeter 133.4mm cell) 2.0R Melting point, 42-62
Product Name: Palm Wax Type: Industrial Grade Origin: China AUCO No.: 998 Packing: 25kg bag Items Standard Acid value, (mg KOH/g) 6.0 Peroxide value, mmol/kg 1.5 Free Fatty Acids 0.1 Colour (Lovibond colorimeter 133.4mm cell) 2.0R Melting point, 42-62
Product Name: Gel Wax Type: Industrial Grade Origin: China AUCO No.: 997 Packing: 25kg bag Items Standard Colour Transparent Moisture and volatiles % 1 Melting point, 50-80
1)Chemical Characteristic� :� Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for� liquid paraffin, natural paraffin etc. 2)� Properties:� White particle,flake or powder, with good lubricant effect,� chemical durability and good electrical performance, soluble in aromatic hydrocarbon.
Soy wax is a vegetable wax made from the oil of soybeans. After harvesting, the beans are cleaned, cracked, de-hulled, and rolled into flakes. The oil is then extracted from the flakes and hydrogenated. The hydrogenation process converts some of the fatty acids in the oil from unsaturated to saturated. This process dramatically alters the melting point of the oil, making it a solid at room temperature. The leftover bean husks are commonly used as animal feed. Adding appropriate beeswax can increase the hardness of the finished wax Animal oil and fat extracted from honeycomb nest, granular, good toughness, suitable for mixing with other waxes, melting point 65 degrees Celsius, can also be used to make difficult silicone mold wax alone.
Paraffin wax is a highly popular, clean burning wax which has a brilliant scent throw when compared to naturally sourced waxes.Often pure white and made from petroleum, paraffin wax is easy to work with, stable when shaped and odourless when burnt. The wax mixes well with all dyes and scents we provide with no adverse effects making it the ideal wax for candle making beginners and adepts alike. Paraffin wax is used for many products, including candles, paper coating and other industrial uses. It is white and comes in a variety of melt points. It can be used alone or as an additive to provide specific properties to a product. Blended Waxes has a variety of domestically sourced paraffin wax products available. If you are looking for a paraffin wax with a custom melt pointï¼?Junda is your excellent choice !
Diesel fuel, d2, gasoil, avtur jet a1 and jp54, coal, nickel, , petrochemical products, cpo.
Urea n46, diesel en590 10ppm, jet fuel a1, dap, basalt fiber products, nitrocellulose centralite ii wind turbine gearbox accessories.Import and export of goods and technology
Soda ash light / dense 99.2% sodium bicarbonate caustic soda flakes 99% sodium sulphate anhydrous (ssa) 99% sodium sulphite flakes (ssf) 60% sodium metabisulphate hydrogen peroxide (h2o2) 50% formic acid 85% glacial acetic acid paraffin wax liquid paraffin (white oil) lp 100 menthol crystal fumed silica deg (di ethylene glycol) mono ethylene glycol (meg) poly ethylene glycol (peg), base oil 150n, bs 150, 600n bitumen 60/70 rpo (rubber process oil) lioh (lithium hydroxide) hco (hydrogenated castor oil) 12 hsa (hydroxy stearic acid) ferrous sulphate heptahydrate additive for lubricating oil aromatic chemicals.Exporting of chemicals & other products
Raw Activated Carbon Powder can be used for all liquid phase filtration applications. It is commonly used to filter chloramines and organic compounds, including pesticides and herbicides, from drinking water. Additional applications include: * Pharmaceutical * Oil & Gas * Drinking water treatment * Groundwater remediation * Wastewater treatment * Pulp & Paper * Brewery & Winery * Dechlorination/chloramine reduction * Removal of organic contaminants * Taste and odor reduction * Disinfection-by-product (DBP) removal
Raw Activated Carbon Powder can be used for all liquid phase filtration applications. It is commonly used to filter chloramines and organic compounds, including pesticides and herbicides, from drinking water. Additional applications include: * Pharmaceutical * Oil & Gas * Drinking water treatment * Groundwater remediation * Wastewater treatment * Pulp & Paper * Brewery & Winery * Dechlorination/chloramine reduction * Removal of organic contaminants * Taste and odor reduction * Disinfection-by-product (DBP) removal
Carbon Black N660 TYPE N219, N220, N234, N326, N330, N339, N472, N539, N550, N660, N772, N774 PRODUCT INTRODUCTION OF N-660 1. Package 1.1 The packages of 20Kgs, which were made of PP material or Kraft papers. 1.2 The packages of 500kgs /1000kgs, which were made of PP material 1.3 Special specifications on the package are acceptable. 2. The Physical & Chemical property. Grainy black amorphous solids, odorless, specific weight 1.82, burning point beyond 400�° C, water insoluble, non-poisonous, stable chemical property. 3. The Perniciousness of carbon-black. Nonflammable, explosibility, corrosive, toxicant, radioactive, dangerous nature. 4. Application. It is used as the Strengthening agents and the filling agents for the production of Cord layer of tires, inner tubes, bicycle tires, rubber tubes, rubber tapes, cable ropes, shoes kind, and patterns. 5. Function N660 fits for all kinds of rubber. Compared with half-reinforcing carbon-black, N660 has more complicated structure, smaller particles, and higher disperstiveness. The tensile strength, the tear resistance, and the tensile stress at a given elongation of vulcanized rubber are very high. Deformed little, heat rise slowly, well elasticity and good flex resistance, but the tensile stretch is low
Granular activated carbon is defined as the activated carbon being retained on a 50-mesh sieve. GAC products are made from coconut shell, coal, lignite, and anthracite products. Adsorption is the primary mechanism by which GAC works and the primary reason it is widely used to reduce undesirable taste, odor and color and to improve the safety of drinking water. Coconut granular activated carbon is mainly used for gold recovery. And 4*8mesh coconut shell activated carbon is usually applied for some heavy metals removal from the waste gas. According to different applications, clients can choose different activated carbon types according to the specific working conditions.
We are a direct mandate to reputable refineries in Qatar, Kazakhstan, USA. for the supply of petroleum and gas products. We are a company that has brought ingenious buyers to refineries, transacting with a standard specification and international trading procedures. At this moment we are glad to inform you that on behalf of our highly esteemed refineries, We are here to take away your stress of recent market. Kindly reach out to us for more enquiries; AVILABLE PRODUCTS: LIGHT CYCLE OIL, DIESEL EN590,EURO 6 (10PPM), GAS OIL D2 L0, 2-62, VIRGIN FUEL OIL D6,AVIATION KEROSENE GRADE 54, JET FUEL A1, LPG - LIQUEFIED PETROLEUM GAS, LNG â??LIQUEFIED NATURAL GAS, MAZUT M100, CRUDE OIL REBCO, EAST SIBERIAN PACIFIC BASIN CRUDE OIL (ESPO), PETROLEUM COKE, GRANULAR UREA 46%.
Viscosity (25, mpa.s) can be customized Vinyl content (%) can be customized End vinyl silicone oil Technical indicators: Appearance colorless transparent liquid Viscosity mPas 200�±30 500�±50 1000�±100 5000�±500 10000�±1000 20000�±2000 60000�±6000 Vinyl mol% 1.9 1.2 0.8 0.45 0.36 0.29 0.22 Volatile % 1.5 The above is a typical index, the company can also be customized according to customer requirements of various viscosity specifications end vinyl silicone oil High vinyl silicone oil Technical indicators: Appearance colorless transparent liquid Viscosity mPas 3000�±300 10000�±1000 85000�±8500 Vinyl mol% 10 3.0 5.0 Volatile % 1.5 The above are typical indicators. The company can also customize various viscosity specifications and high vinyl silicone oils according to customer requirements
Vinyl end phenyl silicone oil CAS No. 68951-96-2 Chemical structure: Vi(CH3)2SiO[Si(CH3)2O] M [Si(C6H5)2O]mSi(CH3)2Vi Product model: KKM-1527 Performance indicators: (appearance, clear and transparent, no odor) (viscosity (25), 3050mPas) (phenyl content, 35%(mol)) (refractive index 1.53) (vinyl content 0.78%) (volatile content 0.92, (150, 3h) %) (The above is a typical index, the company can also be customized according to customer requirements of various viscosity specifications end vinyl silicone oil) This product is mainly used for manufacturing high-power LED silicone packaging adhesive, filling, sealing, bonding and coating in photoelectric, electronic and micro-electronic industries, high light transmittance, high hardness lenses and other uses developed by users themselves. Matters needing attention The product should be prevented from moisture immersion during storage and use. This product should not be mixed with other oils in the process of use so as not to affect the use effect. Package is installed 5kg, 20kg, 200kg plastic drum
1. Product Introduction: This product is belong to C9 category. It has the properties of good mutual solubility, water resistance, ethanol resistance and chemical resistance. It has good chemical stability over acid and alkali, good adhesive strength and good thermal stability etc. 2. Application: This product is suitable for paint.
GLPOLY Thermal Gel Provides Equivalent Performance To Fujipoly SPG-30B, Only GLPOLY Promise. Many rivals claimed that their products were alternative to other brand of products, especially the top class ones, so it seemed like it was very easy to find an analogue in local Chinese market. But in reality, customer could not find a appropriate one from dozens of anologues, for example, one product had a good thermal properties but the physical properties unqualified. GLPOLY thermal interface materials provided excellent integrated performance which was comparable to world class brands. A power supply company contacted me and asked if we can provide an anologue of Fujipoly SPG-30B, I said it was available. â??Donâ??t get so definite yet, though thermal conductivity of Fujipoly SPG-30B was 3.0W/mK, it was not very high, we still could not find a similar product with appropriate flow speed and high reliability, I had tested several products already.â?? I understood what customer concerned about. Definitely, Fujipoly SPG-30B was excellent thermal putty with high performance and reliability. GLPOLY studied this material three year ago and launched thermal gel XK-G30 which provided equivalent performance and properties. I received lots of feedback that most of anologues could provide similar thermal performance but failure to flow speed or dispensing process. According to customerâ??s application requirements, I recommended thermal gel XK-G30 and suggested customer test samples in real conditions. Test lasted for four weeks in high temperature, changes of parameters of GLPOLY XK-G30 thermal putty were within 5%, definitely GLPOLY XK-G30 could substitute for Fujipoly SPG-30B. Customer satisfied with XK-G30 and promised to push product switching asap. We havnâ??t had quality complaint for two years since we started business. GLPOLY had introducd automated production lines to eliminate human error and keep consistency of products. GLPOLY has partnered with NIO Auto, GAC New Energy Auto, Freetech, dJI etc top class brands for years, and is able to competing with world class brands, and strived to exceed world class brands.
