Parameter Specification Result
Appearance White or Yellowish Translucent soft unctuous,odorless,has certain drawing Complies
Melting Point 45-60°C 58°C
UV Absorbance 0.50 (290nm) 0.143
ConePenetration (0.1mm) 122
Residue on ignition
0.05%
0.032
Sulfide 0.00017% Complies
Acidity or Alkalinity Plus phenolphthalein colorless and methyl orange can not show pink
Complies
Density 0.815-0.880 (60°C) 0.832
Organic Acids Show red Complies
Fixed oils, fats&Rosins
No ppt or oily matters is produced
Complies
Heavy metal 0.003% Complies
Arsenic salt 0.0002% Complies
Polycyclic aromatic hydrocarbons Absorbance at 260-420nm not more than the absorbance at 278nm
Complies
Parameter Specification Result
Appearance White or Yellowish Translucent soft unctuous,odorless,has certain drawing Complies
Melting Point 45-60°C 59°C
UV Absorbance 0.50 (290nm) 0.148
ConePenetration 130-230 (0.1mm) 148
Residue on ignition
0.05%
0.031
Sulfide 0.00017% Complies
Acidity or Alkalinity Plus phenolphthalein colorless and methyl orange can not show pink
Complies
Density 0.815-0.880 (60°C) 0.837
Organic Acids Show red Complies
Fixed oils, fats&Rosins
No ppt or oily matters is produced
Complies
Heavy metal 0.003% Complies
Arsenic salt 0.0002% Complies
Polycyclic aromatic hydrocarbons Absorbance at 260-420nm not more than the absorbance at 278nm
Complies
Tung oil is a type of wood finishing product that is derived from the pressed nut of the tung tree. Tung oil is drying oil that is similar to linseed, safflower, poppy, and soybean oil. Drying oils are perfect for wooden objects, since the oil dries to a clear film once it has made contact with the air. Pure tung oil and tung oil finishes are two distinct products that should not be confused with one another.
Tung oil, also known as China Wood Oil, Lumbang oil, Noix dâ??abrasin (fr.) or simply wood oil, is made from the seed kernels of the Tung tree (Aleurites fordii and Aleurites montana, family Euphorbiaceae).
Tung oil was used as a preservative for wood ships. The oil penetrates the wood, then hardens to form an impermeable hydrophobic layer (repels water) up to 5 mm into the wood. As a preservative it is effective for exterior work above and below ground, but the thin layer makes it less useful in practice.
Item
Micronized Wax has ultrafine particle size, high melting point, outstanding grindability and smoothness, good recoatability, breathability. Micronized Wax has good mixing compatibility and dispersion. It used in solvent coatings, powder coatings and ink with excellent smoothness, wear-resisting and anti-scratching.
Usageï¼?
Micronized Wax has good compatibility with ink and coating system. It is widely used in wood coatings, plastic coatings, powder coatings, coil coatings, UV light curing coatings, etc.
Features:
- Acts as a degassing agent in powder coatings
- Excellent anti-blocking and slip properties
- Good scratch resistance properties
- Increased matting
- High water repellent effect
- Improved sand-ability of wood coatings
- No influence on the transparency of polymers
- Excellent dispersion and lubricating properties in plastics applications
We can produce micronized waxes with melting point at 52-325, and hardness at 0.5-15dmm.
Usage :Fischer-Tropsch Wax for Hot Melt Adhesive, PVC, Master-batch, PVC Stabilizer, Road Marking Paint
PACKING :25 KG Valve bag / 980KG Jumbo bag
Properties Unit Specification
Solidifying point 100-109
Drop point 110-119
Viscosity mm2/s at120 18-35
Penetration 0.1mm/100g 5s at 25 Max.2
Oil content % wt Max.0.2
Size,16mesh - 85%
Advantages: 1. This product can completely replace domestic paraffin and suitable for particle board production process.
2. This product can effectively enhance particle board waterproof moisture absorption performance.
3. This product can prevent the particleboard when facing agglutination adhesive solution excessive infiltration phenomenon.
4. The product is powder state, facilitate feeding and subsequent processing, energy conservation, environmental protection, customers can save 30% of the cost of production.
5. We can provide customers with professional custom emulsification of form a complete set of product solutions.
Usage :Fischer-Tropsch Wax for Hot Melt Adhesive, PVC, Road Marking Paint
PACKING :25 KG Valve bag / 980KG Jumbo bag
Properties Test Method Specification
Drop point ASTMD3954-94-2004 102-103
Oil content ASTM D721-2006
Properties Unit Specification
Solidifying point 100-109
Drop point 110-119
Viscosity mm2/s at120 18-35
Penetration 0.1mm/100g 5s at 25 Max.2
Oil content % wt Max.0.2
Size,16mesh - 85%
PACKING :25 KG Valve bag / 980KG Jumbo bag
Properties Unit Specification
melting point 70-74
Viscosity mm2/s@@100 6.9
Drop point ï¼?80
Penetration 0.1mm/100g
5s at25 12.4
Oil content % wt 0.5-1.5
PACKING :25 KG Valve bag / 980KG Jumbo bag
Product Description:
1.it could effectively improve the processing liquidity of PVC heat stabilizer
2.it does not contain heavy metal
3.increases the extrusion efficiency of PVC products
4.it could effectively control the processing aggregation
5.it improves the surface finish
6.it can effectively solve the precipitation phenomenon in the processing of PVC heat stabilizer
7.it is approved SGS inspection and meets ROSH standard.
Technical Parameter
Model NO YD-718
Appearance White powder
Softening point() 128-133
Density ï¼?Kg/m3ï¼? 0.92-0.96
Viscosity 22000
Penetration
Products Specificationï¼?
Property Test Method and Unit Specification Range
Softening Point Ring&Ball,°C 95-130
Color Gardner,50%Toluene Solution 0-3
Acid Value mgKOH/g 0.1 max
Ash Content wt.% 0.05 max
Description:
GD-9H SERIES are water white resin. C9 hydrogenaed petroleum resin , The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), Â Styrene-Butadiene-Styene block copolymer(SBS),Styrene-Isoprene-Styene block copolymer(SIS).
Polyethylene waxes, also known as a polymer called polyethylene wax wax. Because of its excellent cold resistance, heat resistance, chemical resistance and abrasion resistance and is widely used. Normal production, which is part of the wax as an additive can be directly added to the polyolefin processing, it can increase the gloss and processing performance. As the lubricant, its chemical stability, good electrical properties. Polyethylene wax and polyethylene, polypropylene, polyethylene waxes acid ethylene, ethylene-propylene rubber, butyl rubber, good compatibility. Improves polyethylene, polypropylene, ABS flowability and polymethyl methacrylate, polycarbonate releasability. For PVC and other external lubricants compared to polyethylene wax having a stronger internal lubrication.
Property:
Low viscosity, high softening point, hardness and good performance, non-toxic, good thermal stability, high temperature and low volatility, the pigment dispersion, both very excellent external lubrication, there are strong internal lubrication has can improve the productivity of plastic processing, at room temperature, good moisture resistance, chemical resistance ability, excellent electrical properties, can improve the appearance of the finished product.
FT wax 80#, 90#, 105#, 110#, 115# are common models used for hot melt adhesives. Fischer-Tropsch wax for hot melt adhesives offers superior thermal stability, consistent viscosity, and excellent adhesion properties. In comparison, microcrystalline wax provides flexibility and water resistance. FT wax excels in performance under high temperatures and ensures strong and durable bonds in various applications.
Fischer-Tropsch wax, a synthetic wax derived from the Fischer-Tropsch process, has gained popularity in various industries, including the adhesive industry. Specifically, Fischer-Tropsch wax is commonly used in hot melt adhesives due to its unique properties and benefits.
**1. Excellent Thermal Stability:** FT wax exhibits remarkable thermal stability, making it an ideal ingredient for hot melt adhesives. It can withstand high temperatures without losing its structural integrity, ensuring the adhesive maintains its performance even in demanding applications.
**2. Consistent Viscosity:** The wax's consistent viscosity profile contributes to the stable flow properties of hot melt adhesives. This quality allows for precise application and bonding, leading to improved product quality and production efficiency.
**3. Adhesion and Cohesion:** FT wax enhances the adhesion and cohesion properties of hot melt adhesives. It promotes strong bonding between substrates while also improving the adhesive's internal strength, resulting in durable and long-lasting bonds.
**4. Low Odor and Color:** It is known for its low odor and color, which is advantageous in applications where aesthetics and sensory factors are important. It ensures that the adhesive does not impact the appearance or scent of the final product.
**5. Compatibility:** FT wax exhibits good compatibility with a wide range of polymers and additives commonly used in hot melt adhesive formulations. This compatibility enhances the overall stability and performance of the adhesive.
**6. Environmental Friendliness:** FT wax is considered environmentally friendly due to its biodegradability and non-toxic nature. Using this wax in hot melt adhesives aligns with sustainability goals and reduces the environmental impact of the adhesive products.
**7. Improved Processability:** The properties of Fischer-Tropsch wax contribute to the improved processability of hot melt adhesives. It facilitates easier handling, application, and production of adhesives, leading to enhanced manufacturing efficiency.
In conclusion, Fischer-Tropsch wax is a valuable component in hot melt adhesive formulations, offering a combination of thermal stability, consistency, adhesion properties, compatibility, and environmental advantages. Its use in hot melt adhesives contributes to the development of high-performance adhesives that meet the demanding requirements of various industries while also supporting sustainability initiatives.
Petroleum By Products is a final carbon-rich solid material that derives from oil refining, and is one type of the group of fuels referred to as is the that, in particular, derives from a final cracking processa thermo-based chemical engineering process that splits long chain hydrocarbons of petroleum into shorter
WJWAX specializes in producing food grade paraffin wax, food grade microcrystalline wax, food grade white oil and other products. Our company has FDA certification, KOSHER, HALAL, ISO and other food grade certifications. Welcome to consult us.
Food-grade paraffin wax is commonly used for waxing fruits and vegetables to extend their shelf life and retain moisture. Here's how it is utilized in this process:
Protection: The wax forms a protective coating on the surface of fruits and vegetables, reducing moisture loss and preventing spoilage.
Shine: It enhances the appearance of produce by giving it a shiny and appealing look, making it more attractive to consumers.
Preservation: The wax helps to preserve the freshness of fruits and vegetables by creating a barrier against external factors that can lead to decay.
Handling: It makes handling and transportation easier by providing a protective layer that reduces bruising and damage during transit.
Safety: Food-grade paraffin wax is safe for consumption and does not pose a risk to human health when used appropriately on edible items.
By waxing fruits and vegetables with food-grade paraffin wax, producers can improve the visual appeal, extend the shelf life, and enhance the overall quality of the produce for consumers.
4123 Petroleum By Products Suppliers
Short on time? Let Petroleum By Products sellers contact you.
