MCFeCr Cr: 60%min - 65%min, C: 1%, 2% max. LCFeCr Cr: 60%min - 65%min, C:0.25%, 0.5% max. LCFeCr Cr: 60%min - 75%min, C: 0.03%, 0.06%, 0.1% max.
Anode Carbon Block Baked Carbon , Pre- Baked Carbon ScrapBaked Carbon , Pre- Baked Carbon Scrap Anode Scrap is waste product of raw anode. The raw Carbon Anode products after vibration forming shall be inspected one by one according to the appearance inspection standard of raw anode, and the formed blocks that do not meet the appearance inspection standard of raw anode shall be picked out, including cracks, pitted surface, curved surface, bending, deformation and man-made waste products. So we called it , carbon anode scrap . Anode scrap , Anode carbon block . Crushed Anode carbon block . etc.... Carbon block - residual carbon block is the preferred fuel to replace cast Not the furnace! Smoke free Less ash High heat Tywin, come on Supply various specifications of residual anode carbon block | anode carbon block | residual carbon block | waste anode block Carbon/Graphite Anode Scrap
pre-baked consumable Carbon Anode made from petroleum , and coal tar pitch,through mixing,forming and baking processes,be used as anodes in cells of Primary Aluminum Smelter. Pre-baked Carbon Anodes Produced by Carbon has the property of lower Ash content Lower Sulfur content,and Higher Compress strength. CO2 Reactivity Residue can reach above 91%, and Air Reactivity can reach above 96%; the life-span in cells of aluminum electrolysis is 30-33days, with s anodes the carbon consumption required for producing one-ton primary aluminum will reduce by about 30Kg than using Pre-baked Carbon Anodes produced by other suppliers. Higher thermal shock Resistance;Thermal Exposure:
Carbon black is a material produced by the incomplete combustion of coal and coal tar, vegetable matter, or petroleum products, including fuel oil, fluid catalytic cracking tar, and ethylene cracking. Carbon black is a form of paracrystalline carbon that has a high surface-area-to-volume ratio, albeit lower than that of activated carbon. It has high reinforcement property, small deformation, low calorification, good elasticity and flex stiffness characteristics. N110: High reinforcing, super abrasion N115: High reinforcing, super abrasion N121: High reinforcing, super abrasion, high modulus N134: High reinforcing N219: High reinforcing, low modulus, good elongation and resistance to tearing, good flex resistance N220: High reinforcing, high tear resistance, good processing N375: medium-high reinforcing, high modules and hardness, smooth surface of extrusion N539: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion N550: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion N660: medium-high reinforcing and modulus, good flex resistance, low heat buildup N762: low reinforcing N774: semi-reinforcing, good elongation, high resilience, low compressed deformation N234: High reinforcing, high abrasion, high modulus, good dispersion N326: Medium-high reinforcing, low modules, good elongation and resistance to tearing, good flex resistance N330: medium-high reinforcing and modulus, good processing N339: medium-high reinforcing, high modulus and hardness, good processing N347: medium-high reinforcing, high modulus and hardness, good processing N351: medium-high reinforcing, high modulus and hardness, good processing Applicationï¼? Carbon black is mainly used as reinforcing filler in tyres and other rubber products during the vulcanization process to improve the tensile strength and wear resistance of styrene-butadiene, such as rubber conveyor belts, rubber hose, Airsprings and other rubber products. Packing: 20kg/package: 1MT/Pallet 1000kg/package: 1MT/Pallet Or customized
Selecting low ash low sulphur bituminous ,adopting agglomeration process and well-controlled steam activation. The activated carbons display good hardness and high internal surface area , thus effectively adsorb the organic pollutants with large and small molecules and remove the taste and odor compounds and bear repeated backwashing and resist the abrasion. The granular activated carbons functioned as both filtration and adsorption mainly treat the surface and ground water source and produce the clean drinking water.
We use the elaborately selected the low-ash and low-sulfur coal as raw material. Advanced grinding and remodeling are adopted to the process, to make sure the product has higher strength and activity. Besides, our unique steam and activization is utilized in the process, so that it have a high specific surface area and optimized pore size, which can absorb color molecules and odor-producing molecules in the solution.
High quality carbon anode scrap for sale: FC: 98%, Sulfur: 2.5%, Ash: 1%, VM: 1%, Moisture: 1%, Size: 10-30mm, 30-80mm, 60-90mm, 80-150mm, 100-200mm, 100-350mm, 200-400mm or as customer's requirements.
Function:Anti-slip, Anti-Static, acid-resistant, alkali-resistant Place of Origin:Guangdong, China Model Number:EGT01 Style:ESD Top PU Gloves Material:Polyester + carbon fiber + PU glue Size:S/ M/ L Color:Gray(Carbon fiber) Wrist:Hot melt or Overlock Knitting:13 gauge Feature:Anti-static Certification:other
Globular activated carbon of its body structure to contain at least one layer of spherical shell made of activated carbon material, spherical shell is spherical core body, can be made of different in spherical shell material of inorganic materials, spherical shell can be up to 10 mm in diameter. Change the traditional with binder forming old technology. Excluding adhesive composition and completely on carbon molecules between the affinity and the special properties of the material itself. Produced by scientific formula. Effectively avoid the pore structure plugging, pore developed products, powerful. In addition, because the fluid flow channel formed between globular activated carbon fluid mechanics performance is good, the fluid pressure drop through the activated carbon layer is small, so it is especially applicable to in activated carbon bed layer stack height of fixed bed gas processing plant. Globular activated carbon adsorption performance is divided into physical adsorption and chemical adsorption. Physical adsorption is caused by activated carbon is porous, so has the huge specific surface area, it has strong adsorption. Globular activated carbon surface can be as high as 500-1000 m2 / g, is conducive to give full play to the performance, the distributed capacitance is generally about 0.25 ~ 0.9 ml/g, BET specific surface area is about 500 ~ 2000 m2 / g.
Deep purification of drinking water,industrial sewage water;used for atomic facilities such as exhaust purification, division and refinig. Specification:Iodine value,800~1100mg/g,Moisture 5%,Hardness90%,PH6-8/9-11,ash15%,200mesh/8*16mesh/12*40mesh/1-3mm
The use of carburizer in casting can greatly increase the amount of scrap steel, reduce the amount of pig iron, or use no pig iron. The feeding method of furnace smelting should be put into the furnace with waste steel and other materials, and the small dosage can be added to the surface of the molten iron. However, it is important to avoid large quantities of iron and water in order to prevent excessive oxidative effects and insufficient carbon content of casting. The amount of carbon added is determined according to the ratio of other raw materials and carbon content. Different types of cast iron are selected according to the need to choose different types of carbon. The characteristics of the carburizing agent itself choose pure carbon graphitized material, reduce the impurities in pig iron, and the choice of carbon addition agent can reduce the production cost of the casting. In the process of smelting, the carbon content in the steel can be added to the molten steel, due to the improper loading or loading and the excessive amount of decarburization. The commonly used additive is carbon iron, electrode powder, petroleum coke powder, charcoal powder and coke powder. In converter smelting and high carbon steel, the use of petroleum coke with few impurities is used as a carbon extender. The requirement for the carbon dioxide of the converter steelmaking is high, the ash, volatile and sulfur, phosphorus, nitrogen and other impurities are low, and dry, clean, the particle size is moderate
Testing item Range Result Standard Iodine Absorption Number (g/kg) 82±5 80 GB3778-2011 Oil Absorption Number(10-5m3/kg) 102±5 99 GB3778-2011 Crushed OAN(COAN) (10-5m3/kg) 88�±5 91 GB3778-2011 Tint Test, Reflectance From ITRB 3# (%) 104�±8 100 GB3778-2011 NSA multipoint(103m2/kg) 78±5 81 GB3778-2011 STSA (103m2/kg) 75±5 72 GB3778-2011 Heating Loss/Moisture (%) 1.0 0.2 GB3778-2011 Ash Content (%) 0.5 0.2 GB3778-2011 500m Sieve Residue (mg/kg) 10 6.5 GB3778-2011 45m Sieve Residue (mg/kg) 500 332.0 GB3778-2011 Pour Density (kg/m3) 380±40 421.0 GB3778-2011 Stress at 300% Elongation (Mpa) -0.5±1.0 0.5 GB3778-2011 Fine Content(Jumbo Bag) (%) 7.0 4.3 GB3778-2011 Fine Content(Paper Bag) (%) 10 5.0 GB3778-2011
Activated carbon decription: Activated carbon is carbon with highly developed holes. It offers large specific surface area, strong absorbability and mechanical strength. Furthermore, it can resist acid, alkali and heat. It is not only used as an excellent adsorbent, but also as a catalyzer and catalyzer carrier. Widely used in industrial production, agriculture, environmental protection There are three kinds of materials activated carbon: Coal and wood and nut shell materials Coal-base activated carbon includes powdered grade, granular grade and columnar grade. Activated carbon application 1. Water purification and sewage treatment 2. As catalyst and catalyst carrier in chemical industry... 3. As catalyst and catalyst carrier in chemistry industry. 4. Refine and purification of various gases, precious metals refining and gas mask 5. For industrial tail gas purification, denitration, gas separation, PSA, air drying, 6. Food keeping fresh, gas mask, removing dioxin, accelerant carrier, home decoration, Package: 25kg into polywoven bag, PE lined. 50kg into poly woven bag, PE lined. 500kg or 1000kg into jumbo bag. (with pallets If required) Granular Coconut Activated Carbon for Gold Recovery Granular Coconut Activated Carbon for Gold Recovery Our Service: 1. Reply to your enquiry in 24 working hours; 2. Experienced staffs answer all your questions in fluent English; 3. Customised design is available. OEM are welcomed. 4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staffs. Name/Specification Coconut shell activated carbon Apricot shell activated carbon Iodine adsorption value â?¥900mg/g â?¥900mg/g Benzene adsorption quality 400mg/g 400mg/g mechanical strength â?¥95% â?¥95% Filling density 0.4-0.5g/cm3 0.4-0.5g/cm3 Acetic acid adsorption quantity 500mg/g 500mg/g PH value 5-7.5 5-9 Acetic acid zinc adsorption 7mg/g 6mg/g Moisture â?¤5% â?¤5% minimum flow velocity 9-12.5m/s 9-12.5m/s Specific Surface area 900-1110m2 900-1110m2 Fire point 500°C 500°C Total hole volume 0.8cm3/g 0.8cm3/g
C9 hydrocarbon resin is made of C9 fraction,which is widely used in paint,adhesive,inks and rubber tyre. C9 hydrocarbon resin is fully compatible with nature rubber, various kinds of synthetic rubber, such as SBR,BR,CR,NBR,IIR and PE,PP,SIS,SEBS,EVA. Applications: a.Paint b.Rubber Compounding c.Adhesive d.Printing Ink
TA5100 is hydrocarbon resin which is suitable for hot-melting adhesives, (including quick packaging adhesives,book binding adhesives, wood adhesives and glue sticks, etc.) They have excellent compatibility with SIS, SBS ,EVA ,natural rubber and many kinds of synthetic rubbers . They provide enhanced performance in hot melt adhesive applications. Features of TA5100 in Hot Melt Adhesive and Pressure Sensitive Adhesives: Good open time / set time balance, Good adhesive ability Excellent aging stability Light color Applications: Hot melt adhesive, pressure sensitive adhesive
Cleaning carbon from intake ports and valves on turbo engines N54,N55 used walnut shell yellow The walnut shell powder is made from walnut broken shell, It is widely used for the surface cleanness. Mositure: 5%max Impurity content: 0.03%max Mesh size: 8-12mesh, 12-20mesh, 20-30mesh, 30-40mesh, 40-60mesh, 60-80mesh, 80-120mesh Colour: yellow Packing: double plastic bag or according to your requirement
The fiber spherical filter sold by Ningxia Biyuan Activated Carbon Co., Ltd. is formed by a fiber plug structure and it is compared with the traditional particle filter. Good elasticity, no embossed surface, large pores, loss of water head, acid and alkali, etc.; During filtration, the flow direction of the filter along the gap becomes smaller and smaller. The filter that is more in line with the ideal filter has a small difference in size and high efficiency. Fast filtration, strong sewage interception capacity, renewable, filtration of various waters. Ningxia Biyuan Activated Carbon Co., Ltd. is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Coal based activated carbon uses high-quality anthracite coal as raw material, and is developed through a series of processes such as carbonization, cooling, activation, and washing. Granular activated carbon is obtained by carbonization and activation of wood, hard husk or animal bone, and then converted to coal by crushing, molding or even carbonization and activation with uniform coal particles.
Carbon additive sold by Ningxia Biyuan Activated Carbon Co., Ltd. is a kind of filter material for water treatment. It can be used for ordinary acid, moderate alkali treatment. The product has a large surface area and all indicators exceed the standards of the Ministry of Construction. Anthracite filter media are particularly selected from deep well minerals and therefore contain the highest percentage of carbon. Raw materials are often filtered and washed to ensure that the product has a good effect on water filtration. Ningxia Biyuan Activated Carbon Co., Ltd. is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Powder activated carbon is made from high quality sawdust and charcoal which are refined by scientific method. Itsappearance is in black and with large pores. It is non-toxic and tasteless. It is featured by large surface area,strong adsorption capacity, fast filtration speed and high purity of decoloration etc.
