Application:It is widely used in the production of PE and PVC cables, PVC profiles and pipes. In the plastic processing industry, the internal and external lubrication of PVC is relatively balanced; The lubricity of oxidized polyethylene wax in the hard, transparent and opaque PVC formulation is better than that of other lubricants.
Features and Benefits:
1.Good hardness
2.Good thermal stability
3.Good lubricity
Properties Unit Test Method Specifications
Mettler drop point C ASTM D3954 128
Density g/cc ASTM D1505 0.99
Hardness d-mm ASTM D-5
Application:It is used as color concentrate,Dispersion Agents,Adhesives,Inks and Paints,Coating,Cable Filling Compound,Lubricants agent and Mold release agent and so on.
Features and Benefits:
1.Low viscosity
2.Good thermal stability
3.Good dispersion
Properties Unit Test Method Specifications
Melting point C ASTM E 28 110 3
Density g/cm3 23 C ASTM D 1505 0.93
Hardness d-mm 25C ASTM D 5 5
Acid value Mg KOH/g ASTM D 1386 15 1
Appearance Yellowish powder
Application:It is used as dispersion agents and lubricant for pigments or fillers such as thick color master-batch, polypropylene master-batch, additive master-batch and filling master-batch.
Features and Benefits:
1.Low viscosity
2.High melting point
3.Good hardness
Properties Unit Test Method Specifications
Mettler drop point C ASTM D3954 102
Density g/cc ASTM D1505 0.99
Hardness d-mm ASTM D-5 5
Acid No. Mg KOH/g - 12
Viscosity mm2/s at 150 C Brookfield 5000
Particle size mesh ASTM D6913-2004 20
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production.
Properties Unit Test Method Results
Melting point C GB/T 2539 54-56
Oil content GB/T 3554 0.8
Color GB/T 3555 27
Light stability SH/T 0404 4
Penetration 25 C,1/10mm GB/T 4985 19
4122 Petroleum By Products Suppliers
Short on time? Let Petroleum By Products sellers contact you.
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production.
Properties Unit Test Method Results
Melting point C GB/T 2539 70-72
Oil content GB/T 3554 0.8
Color - GB/T 3555 25
Light stability - SH/T 0404 5
Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production.
Properties Unit Test Method Results
Melting point C GB/T 2539 70-72
Oil content GB/T 3554 0.8
Color - GB/T 3555 25
Light stability - SH/T 0404 5
Penetration
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production.
Properties Unit Test Method Results
Melting point C GB/T 2539 58-60
Oil content GB/T 3554 0.8
Color - GB/T 3555 27
Light stability - SH/T 0404 4
Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production.
Properties Unit Test Method Results
Melting point C GB/T 2539 64-66
Oil content GB/T 3554 0.8
Color - GB/T 3555 25
Light stability - SH/T 0404 5
Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production.
Properties Unit Test Method Results
Melting point C GB/T 2539 50-52
Oil content GB/T 3554 0.8
Color - GB/T 3555 27
Light stability - SH/T 0404 4
Penetration 25C,1/10mm GB/T 4985 19
Fischer Tropsch wax is mainly composed of linear and saturated high carbon alkanes with relative molecular weight of 500-1000, which gives this chemical fine crystal structure, high melting point, narrow melting point range, low oil content, low penetration, low mobility, low melting viscosity, hardness, wear resistance and high stability.
Usages:These products are widely used in textiles,plastics industry,Ink and coating,adhesive.
Features
Hydroxy silicone oil is made by polymerization of siloxane monomers, the molecular silicone materials have hydroxyl groups at both ends.
The structural formula:HO-Si (CH3) 2 O [Si (CH3) 2 O] n Si(CH3)2-OH
Chemical name is a, w- dihydroxy polydimethylsiloxane, it name 107 silicone rubber when the viscosity is above 2500mPa.S. In addition to the general performance of methyl silicone oil, it also has reactive hydroxyl groups, it can be made available some new material or crosslinked into elastomers (or membrane) .
Colorless transparent liquid with excellent electrical insulating properties and resistance to high temperature, high flash point, low freezing point, long-term used -50 o C ~ +250 o C conditions, low the viscosity-temperature coefficient, high compression ratio, low surface tension, hydrophobic moisture resistance, chemical inertness, physiologically inertness.
Product Properties:
Appearance : colorless transparent liquid.
Viscosity (25oC, mpa.s): 25~100000 (can be customized)
Hydroxyl content (%): 0.5 - 3 (related to the viscosity).
> Function: Absort oil only while repelling water.Absorb oil or oil-based liquid only,engine oilã??hydraulic oilã??gasolineã??dieselã??keroseneâ?¦ect.
> Suitable: Apply to land,water surface.
> Characteristic :
*After fully absorbing,keep floating always.
*Recycle about 80% oil after fully absorbing,and reuse it.
*Burning after using,ashâ?¤0.02%.
*It has strong oil absorption capacity.
*Characteristic : Large mats,quick absorbing,according to the oil viscosity,you can choose different type.
*Suitable : cabin,ocean,river etc any possible spill areas.
Paraffin wax, colorless or white, somewhat translucent, hard wax composed of saturated hydrocarbons ,with a melting point in the range of about 48 to 66C (120 to 150F). Paraffin wax is obtained from petroleum by dewaxing light lubricating oil.
Paraffin wax is a petroleum by-product created when crude oil is refined into gasoline. Paraffin is the most commonly used wax for candle making. Paraffin wax has many other uses, too. It is often used as lubrication, electrical insulation, and to make candles and crayons. It is used in candles, wax paper, polishes, cosmetics and electrical insulators. It helps extract perfume from flowers, forms a base for medical ointments, and provides waterproof coatings for wood
Application:
The plant is applied to products with the melting point below 250�°C for curing and shaping. Typical applied materials include: Sulphur, Paraffin Wax, Resin, Asphalt, Maleic Anhydride, Trimellitic Anhydride, Salt Stearate, Hot-Melt Adhesives, M-Phenylenediamine, Urea, Rubber and Plastic Auxiliary etc.
Working principle:
Melting material, through material distributor, drips down to the steel belt which is moving evenly. Under the belt, there are continuous sprayer and cooling device which can cool, solidify and pelletize material on belt as soon as possible. According to material feature and process requirements, outward turning, rotating, reciprocating, gate types are available for your choice. Based on material feature and use requirements, material distributing forms like incontinuous dripping, continuous strip, full-width overflowing are available, and with hemispheric, bar, flake products.
Parameter Specification Result
Appearance White or Yellowish Translucent soft unctuous,odorless,has certain drawing Complies
Melting Point 45-60°C 58°C
UV Absorbance 0.50 (290nm) 0.143
ConePenetration (0.1mm) 122
Residue on ignition
0.05%
0.032
Sulfide 0.00017% Complies
Acidity or Alkalinity Plus phenolphthalein colorless and methyl orange can not show pink
Complies
Density 0.815-0.880 (60°C) 0.832
Organic Acids Show red Complies
Fixed oils, fats&Rosins
No ppt or oily matters is produced
Complies
Heavy metal 0.003% Complies
Arsenic salt 0.0002% Complies
Polycyclic aromatic hydrocarbons Absorbance at 260-420nm not more than the absorbance at 278nm
Complies
4122 Petroleum By Products Suppliers
Short on time? Let Petroleum By Products sellers contact you.
