Anode Carbon Block
Baked Carbon , Pre- Baked Carbon ScrapBaked Carbon , Pre- Baked Carbon Scrap Anode Scrap is waste product of raw anode. The raw Carbon Anode products after vibration forming shall be inspected one by one according to the appearance inspection standard of raw anode, and the formed blocks that do not meet the appearance inspection standard of raw anode shall be picked out, including cracks, pitted surface, curved surface, bending, deformation and man-made waste products. So we called it , carbon anode scrap . Anode scrap , Anode carbon block . Crushed Anode carbon block . etc....
Carbon block - residual carbon block is the preferred fuel to replace cast
Not the furnace! Smoke free Less ash High heat Tywin, come on
Supply various specifications of residual anode carbon block | anode carbon block | residual carbon block | waste anode block Carbon/Graphite Anode Scrap
pre-baked consumable Carbon Anode made from petroleum , and coal tar pitch,through mixing,forming and baking processes,be used as anodes in cells of Primary Aluminum Smelter. Pre-baked Carbon Anodes Produced
by Carbon has the property of lower Ash content Lower Sulfur content,and Higher Compress strength.
CO2 Reactivity Residue can reach above 91%, and Air Reactivity can reach above 96%; the life-span in cells of aluminum electrolysis is 30-33days, with s anodes the carbon consumption required for producing one-ton primary aluminum will reduce by about 30Kg than using Pre-baked Carbon Anodes produced by other suppliers. Higher thermal shock Resistance;Thermal Exposure:
Type: Coconut shell activated carbon
Mesh: 4x8, 8x16, 8x30 mesh
Iodine Number (AWWA B 600-78): 900-1200 mg/g
Application: Drinking Water purification, process water and condensate stream purification, wastewater treatment, chemical purification, food stuff purification
It used in the field of gas phaseadsorption, recovery of organic solvents such as alcohol, ester, hydrocarbonand aromatic.
It used for airfiltration, purification and removal of harmful gases. Mainly used for air purifier,gas mask, operating room, chemical medicine workshop, purification of hotelrooms and organic solvent recovery.
Widely used in thepurification and deodorization for the drinking water, in the further (deep)treatment to the toxicity, COD, BOD, Cdonbacillus, etc for the industrialwastewater and municipal wastewater, in the ultra water purification for theelectronic & pharmaceutical industries.
Main index : iodine value :600-1000mg/g; Moisture: less than 10%; Strength: more than 95%.
Chengde JisenCarbon Industry Company has an ISO 9001 certificate. We only do the activatedcarbons which are 100% according to the specifications or customers' detailrequest. As for packaging, generally it is 25 KG PP BAGS or 500 KG PP BAGS.
Product Information:
3K/6K/12K two-way carbon fiber cloth is made of raw material 3K/6K/12K carbon fiber silk, plain weave or twill weave. It has the characteristics of high strength, high modulus, light texture, corrosion resistance and high temperature resistance.
Product Features:
1.High strength
2.Light texture
3.Preservative
4.High temperature resistance
Applications:
1.Sports and leisure products: surfboards, water skis, snowboards, paddles, bicycles, sports shoes, fishing rods, rackets, fitness equipment, protective equipment, etc.;
2.Automobile and motorcycle parts: Appearance parts such as automobile surrounds, hoods, lamp eyebrows, grilles, etc., interior parts such as center consoles, gear shifters, steering wheel pedals, etc., motorcycle exhaust pipes, safety helmets, fenders, etc.;
3.Industrial products: engine parts, transmission shafts, pressure vessels, scrapers, computer and other electrical shell parts, protective shells, fire protection equipment, etc.;
4.Medical supplies: medical CT bed boards, prosthetics, brackets, etc.;
5.High-end daily necessities: bags, musical instruments, pen tubes, craft decorations, models, etc.;
Packaging Information:
Carbon fiber fabric is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets.
Powdered Activated Carbon
Powdered activated carbon (PAC) is a fine black powder that is produced by heating carbon-rich materials, such as coal, wood, or coconut shells, in the absence of air to create activated carbon. PAC is widely used in various applications, including water treatment, air purification, gas processing, and industrial processes.
In water treatment, PAC is added to the water to remove organic contaminants, such as pesticides, solvents, and pharmaceuticals, as well as taste and odor-causing compounds. The PAC particles attract and adsorb these contaminants, effectively removing them from the water. PAC is also used in wastewater treatment to remove dissolved organic compounds and color from the wastewater.
In air purification, PAC is used to remove pollutants, such as volatile organic compounds (VOCs), from the air. The PAC particles adsorb these pollutants, effectively reducing their concentration in the air.
Granular Activated Charcoal
Granular Activated Charcoal (GAC) is a highly porous form of activated carbon that is used in a wide range of applications, including water and air purification, gas and vapor adsorption, and chemical and pharmaceutical processing. It is produced by heating carbon-rich materials, such as coconut shells or wood, in the absence of air, which creates a highly porous material with a large surface area.
The surface area of GAC can range from 500 to 1500 square meters per gram, depending on the specific production process and the pore size distribution. This high surface area and porosity give GAC excellent adsorption properties, allowing it to attract and retain a wide range of organic and inorganic compounds.
GAC is commonly used in water treatment applications, where it is used to remove impurities such as chlorine, volatile organic compounds (VOCs), pesticides, and other organic contaminants. It can also be used to remove odors and flavors from water.
Honeycomb Activated Carbon
Honeycomb activated carbon is a type of activated carbon that is structured in a honeycomb shape. It is commonly used in air and water purification due to its high surface area and pore volume, which allows it to effectively adsorb impurities and pollutants. The honeycomb structure also provides excellent flow characteristics, making it ideal for use in filtration systems.
https://www.recarburizers.com/products/coal-based-honeycomb-activated.html
Features
Honeycomb activated carbon is a type of activated carbon that has a unique honeycomb-like structure, with a high surface area and porosity. Its features include:
High surface area: Honeycomb activated carbon has a high surface area that allows it to adsorb a wide range of impurities.
Low pressure drop: Its unique structure provides low pressure drop, which makes it ideal for applications with high flow rates.
High adsorption capacity: Honeycomb activated carbon has a high adsorption capacity for a wide range of contaminants, including volatile organic compounds (VOCs), odors, and gases.
Regenerable: It can be regenerated by heating it to high temperatures and reused, making it a cost-effective option.
Some common applications of honeycomb activated carbon include:
Air purification: It can be used to remove VOCs, odors, and other air pollutants from indoor and outdoor environments.
Water treatment: It can be used for the removal of organic and inorganic contaminants, as well as taste and odor control in drinking water.
Gas purification: It can be used to purify gases, such as natural gas and biogas.
Catalyst support: It can be used as a support material for catalysts in chemical and petrochemical processes.
Carbon black is a material produced by the incomplete combustion of coal and coal tar, vegetable matter, or petroleum products, including fuel oil, fluid catalytic cracking tar, and ethylene cracking. Carbon black is a form of paracrystalline carbon that has a high surface-area-to-volume ratio, albeit lower than that of activated carbon. It has high reinforcement property, small deformation, low calorification, good elasticity and flex stiffness characteristics.
N110: High reinforcing, super abrasion
N115: High reinforcing, super abrasion
N121: High reinforcing, super abrasion, high modulus
N134: High reinforcing
N219: High reinforcing, low modulus, good elongation and resistance to tearing, good flex resistance
N220: High reinforcing, high tear resistance, good processing
N375: medium-high reinforcing, high modules and hardness, smooth surface of extrusion
N539: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion
N550: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion
N660: medium-high reinforcing and modulus, good flex resistance, low heat buildup
N762: low reinforcing
N774: semi-reinforcing, good elongation, high resilience, low compressed deformation
N234: High reinforcing, high abrasion, high modulus, good dispersion
N326: Medium-high reinforcing, low modules, good elongation and resistance to tearing, good flex resistance
N330: medium-high reinforcing and modulus, good processing
N339: medium-high reinforcing, high modulus and hardness, good processing
N347: medium-high reinforcing, high modulus and hardness, good processing
N351: medium-high reinforcing, high modulus and hardness, good processing
Applicationï¼?
Carbon black is mainly used as reinforcing filler in tyres and other rubber products during the vulcanization process to improve the tensile strength and wear resistance of styrene-butadiene, such as rubber conveyor belts, rubber hose, Airsprings and other rubber products.
Packing:
20kg/package: 1MT/Pallet
1000kg/package: 1MT/Pallet
Or customized
Selecting low ash low sulphur bituminous ,adopting agglomeration process and well-controlled steam activation. The activated carbons display good hardness and high internal surface area , thus effectively adsorb the organic pollutants with large and small molecules and remove the taste and odor compounds and bear repeated backwashing and resist the abrasion.
The granular activated carbons functioned as both filtration and adsorption mainly treat the surface and ground water source and produce the clean drinking water.
We use the elaborately selected the low-ash and low-sulfur coal as raw material. Advanced grinding and remodeling are adopted to the process, to make sure the product has higher strength and activity. Besides, our unique steam and activization is utilized in the process, so that it have a high specific surface area and optimized pore size, which can absorb color molecules and odor-producing molecules in the solution.
Globular activated carbon of its body structure to contain at least one layer of spherical shell made of activated carbon material, spherical shell is spherical core body, can be made of different in spherical shell material of inorganic materials, spherical shell can be up to 10 mm in diameter. Change the traditional with binder forming old technology. Excluding adhesive composition and completely on carbon molecules between the affinity and the special properties of the material itself. Produced by scientific formula. Effectively avoid the pore structure plugging, pore developed products, powerful. In addition, because the fluid flow channel formed between globular activated carbon fluid mechanics performance is good, the fluid pressure drop through the activated carbon layer is small, so it is especially applicable to in activated carbon bed layer stack height of fixed bed gas processing plant. Globular activated carbon adsorption performance is divided into physical adsorption and chemical adsorption. Physical adsorption is caused by activated carbon is porous, so has the huge specific surface area, it has strong adsorption. Globular activated carbon surface can be as high as 500-1000 m2 / g, is conducive to give full play to the performance, the distributed capacitance is generally about 0.25 ~ 0.9 ml/g, BET specific surface area is about 500 ~ 2000 m2 / g.
Deep purification of drinking water,industrial sewage water;used for atomic facilities such as exhaust purification, division and refinig.
Specification:Iodine value,800~1100mg/g,Moisture 5%,Hardness90%,PH6-8/9-11,ash15%,200mesh/8*16mesh/12*40mesh/1-3mm
The use of carburizer in casting can greatly increase the amount of scrap steel, reduce the amount of pig iron, or use no pig iron. The feeding method of furnace smelting should be put into the furnace with waste steel and other materials, and the small dosage can be added to the surface of the molten iron. However, it is important to avoid large quantities of iron and water in order to prevent excessive oxidative effects and insufficient carbon content of casting. The amount of carbon added is determined according to the ratio of other raw materials and carbon content. Different types of cast iron are selected according to the need to choose different types of carbon. The characteristics of the carburizing agent itself choose pure carbon graphitized material, reduce the impurities in pig iron, and the choice of carbon addition agent can reduce the production cost of the casting.
In the process of smelting, the carbon content in the steel can be added to the molten steel, due to the improper loading or loading and the excessive amount of decarburization. The commonly used additive is carbon iron, electrode powder, petroleum coke powder, charcoal powder and coke powder. In converter smelting and high carbon steel, the use of petroleum coke with few impurities is used as a carbon extender. The requirement for the carbon dioxide of the converter steelmaking is high, the ash, volatile and sulfur, phosphorus, nitrogen and other impurities are low, and dry, clean, the particle size is moderate
