Applications: Wear-resistant material for all mechanical equipment exposed to heavy abrasion,material delivery systems, pulverizing systems, ash or dust removing systems in thermal power generation, iron and steel works, smelting, machinery, coal, mining, chemical, cement and harbors.
Features
1.Alumina wear-resistant sheet has high hardness
It Rockwell hardness is HRA80-90, second to only diamond and far better than wear-resistant steel and stainless steel.
2.Alumina wear-resistant sheet has sound wear performance
Its wear resistance is 266 times that of manganese steel and 171.5 times that of high chromium cast iron. From our customer follow-up over the past decade, under the same load, it can extend the equipment service life by at least 10 times.
3.Alumina wear-resistant sheet has light weight
Its density is 3.6g/cm3, just half of iron and steel, which greatly reduces the equipment load.
Size: 12*3mm,12*6mm,12*9mm,12*13mm, or cusomer required size
Packing: in Cartons
Normally square or hexagon
Applications: Wear-resistant material for all mechanical equipment exposed to heavy abrasion like coal/material delivery systems, pulverizing systems, ash/dust removing systems in thermal power generation, iron and steel works, smelting, machinery, coal, mining, chemical, cement and harbors.
Features
1.Alumina wear-resistant sheet has high hardness
It Rockwell hardness is HRA80-90, second to only diamond and far better than wear-resistant steel and stainless steel.
2.Alumina wear-resistant sheet has sound wear performance
Its wear resistance is 266 times that of manganese steel and 171.5 times that of high chromium cast iron. From our customer follow-up over the past decade, under the same load, it can extend the equipment service life by at least 10 times.
3.Alumina wear-resistant sheet is lightweight
Its density is 3.6g/cm3, just half of iron and steel, which greatly reduces the equipment load.
4.Alumina wear-resistant sheet is securely bonded and highly heat resistant
Our alumina wear-resistant ceramic sheet is attached to the equipment inner wall by heat resistant super glue and can work constantly under 350 without ageing. The organic adhesive for attaching the product withstands 750 temperature. The heat resistance and bonding performance of the adhesive is far ahead of other products in China.
Size: 10*10*3-10, 17.5*17.5*3-15, 20*20*4-20, 24*24*4-20
Packing: in Cartons
Product Advantages: Accurate product dimensions, neat surface, high purity, high wear resistance
Normally square or hexagon
Applications: Wear-resistant material for all mechanical equipment exposed to heavy abrasion like coal/material delivery systems, pulverizing systems, ash/dust removing systems in thermal power generation, iron and steel works, smelting, machinery, coal, mining, chemical, cement and harbors.
Features
1.Alumina wear-resistant sheet has high hardness
It Rockwell hardness is HRA80-90, second to only diamond and far better than wear-resistant steel and stainless steel.
2.Alumina wear-resistant sheet has sound wear performance
Its wear resistance is 266 times that of manganese steel and 171.5 times that of high chromium cast iron. From our customer follow-up over the past decade, under the same load, it can extend the equipment service life by at least 10 times.
3.Alumina wear-resistant sheet is lightweight
Its density is 3.6g/cm3, just half of iron and steel, which greatly reduces the equipment load.
4.Alumina wear-resistant sheet is securely bonded and highly heat resistant
Our alumina wear-resistant ceramic sheet is attached to the equipment inner wall by heat resistant super glue and can work constantly under 350 without ageing. The organic adhesive for attaching the product withstands 750 temperature. The heat resistance and bonding performance of the adhesive is far ahead of other products in China.
Size: 10*10*3-10, 17.5*17.5*3-15, 20*20*4-20, 24*24*4-20
Packing: in Cartons
Product Advantages: Accurate product dimensions, neat surface, high purity, high wear resistance
Application: Wear-resistant material for surfaces of delivery equipment or liquid flowing pipes of petroleum, mining, cement,chemical,steel works and power plants, purposed to effectively resist the impact , corrosion and thermal impact from passing material, reduce abrasion and thereby significantly extends the service life of the equipment. It is the first choice for wear-resistant material for industrial application. It especially endure high temperature.
Installation: Either by welding or by sticking with glue according to specific working condition
Packing: in cartons plus pallet
Product Advantages: Large variety, diverse sizes, small tolerance, accurate dimension
Application: Wear-resistant material for surfaces of delivery equipment or liquid flowing pipes of petroleum, mining, cement,chemical,steel works and power plants, purposed to effectively resist the impact , corrosion and thermal impact from passing material, reduce abrasion and thereby significantly extends the service life of the equipment. It is the first choice for wear-resistant material for industrial application. It especially endure high temperature.
Installation: Either by welding or by sticking with glue according to specific working condition
Packing: in cartons plus pallet
Product Advantages: Large variety, diverse sizes, small tolerance, accurate dimension
Application: Wear-resistant material for surfaces of delivery equipment or liquid flowing pipes of petroleum, mining, cement,chemical,steel works and power plants, purposed to effectively resist the impact , corrosion and thermal impact from passing material, reduce abrasion and thereby significantly extends the service life of the equipment. It is the first choice for wear-resistant material for industrial application. It especially endure high temperature.
Installation: Either by welding or by sticking with glue according to specific working condition
Packing: in cartons plus pallet
Product Advantages: Large variety, diverse sizes, small tolerance, accurate dimension
Applications: Widely used as underlying packing material for the hydrocracking systems, refining systems, CRCC systems, isomerizing systems and demethylating systems of petrochemical plants, chemical fiber plants, alkylbenzene plants, aromatic plants, ethylene plants and natural gas plants, and as the supporting or covering material for catalysts, molecule sieves and dryers inside reactors and packing material for towers. It primary purpose is to increase the gas or liquid distribution points, and support and protect less strong active catalysts.
Features: High purity, large strength; heat, high pressure and strong acid corrosion resistant; sound thermal vibration stability and stable chemical performance
Size: 3mmï¼?6mmï¼?8mmï¼?9mm, 10mmï¼?13mmï¼?16mmï¼?19mmï¼?25mmï¼?30mmï¼?32mm, 38mmï¼?
50mmï¼?65mmï¼?70mm 75mm
Packing: 1) Normal package: in 25kg net woven polythene bags, on a pallet if necessary.
2) Steel pail: in 100L steel pails, on a pallet if necessary.
Product Advantages: The alumina produced by China Aluminum Corp. is used as the base material, which provides high purity, little impurity and stable quality. Production is implemented on kanban basis and the entire production process is controllable and traceable. Each batch of product is strictly tested. The process and result guarantee stable performance and proven quality of the final product.
Pearl-like luster and a smooth working sphere. It is the top class of grinding media
Applications: Particularly suitable for vertical stirring mills, horizontal roller ball mills, vibrating mills and various high linear speed pin-type sand mills, for wet or dry ultrafine dispersion and grinding of pastes and powders requiring to refuse cross contamination. Its application includes:
1.Wear and corrosion resistant product: coating, textile, pigment, dyeing
2.High strength, high tenacity product: magnetic material, piezoelectric ceramics, dielectric ceramics
3.Pollution prevention: medicine, food, cosmetics
4.Ceramics: electronic ceramics, refractory ceramics, structural ceramics
Features: High strength, high tenacity, high density; sound wear resistance; heat and corrosion resistance; high rigidity; non-magnetic conducting; electric insulation and thermal expansion coefficient close to that of steel. The alumina ceramic ball is subject to little strength and hardness variation even under 600. It is baked under high temperature on fixed phase basis by a special shaping process using yttria as the stabilizer.
1.High grinding efficiency: Yt-stabilized TZP zirconia ceramic microball has a specific gravity 1.6 times that of common zirconia beads and ensures higher grinding efficiency under the same conditions
2.Sound fluidity: The product provides sound circular integrity, is smooth on the surface and causes lower abrasion to equipment than any other grinding medium
3.Impact resistant, low abrasion: TZP zirconia ceramic microball has sound tenacity, does not crack or strip in high speed/high concentration machines, with abrasion only 1/2 that of zirconium silicate beads
4.Low service cost: Choosing this product will undoubtedly bring down our cost on media abrasion, power consumption, labor and equipment, and significantly improve your product quality
The high alumina heat storage ball is also called a spherical heat storage body, and the spherical heat storage body has the advantages of good thermal shock stability, large heat storage capacity, high strength, easy cleaning, and reusability.
Working principle and characteristics of high alumina heat storage ball
1. High alumina heat storage ball is a small ball that divides the airflow into small streams. When the airflow flows through the heat conductor, it forms a strong turbulent flow, effectively breaks the surface layer of the heat conductor surface, and because the ball diameter is very Small, small conduction radius, small thermal resistance, high density, good thermal conductivity, so the requirements of frequent and rapid commutation of the heat-conductive burner can be realized.
2. The heat conductor can be reversed by 20~30 times/h. After the high-temperature smoke flow passes through the bed of the heat conductor, the flue gas can be reduced to about 130 °C.
3. The high temperature gas and air flowing through the heat conductor can be preheated to the same temperature only about 100 ° C lower than the flue gas temperature, and the temperature efficiency is as high as 90% or more.
4. Due to the compact size of the thermal conductor, coupled with the high circulation capacity of the high aluminum heat storage ball bed, even if the resistance increases after the accumulation of ash does not affect the heat exchange index.
5. High alumina heat storage ball has the characteristics of strong oxidation resistance and slag resistance.
6. High alumina heat storage ball replacement and cleaning is very convenient and can be reused.
High alumina heat storage ball use: widely used in steel, metallurgical industry heating furnace, alumina melting furnace, forging furnace and other industrial furnaces. It is especially suitable for air storage equipment regenerators and steel furnace blast furnace gas heating furnaces as heat storage fillers. By double preheating the gas and air, the combustion temperature can quickly reach the requirements of steel slab heating.
High alumina heat storage ball main specifications: Φ3, 6, 8, 10, 13, 16, 19, 25mm
High alumina heat storage ball alumina content: 92% 95% 99
High aluminaheat storage ball packaging: double-layer polyethylene woven bag with a net weight of 25kg, plus tray
Win-Ceramic product advantages: high strength, wear resistance, rapid cold resistance, long use time, and cost-effective with imported porcelain balls
The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system!
We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production.
This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off.
After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience.
Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times.
It is the ideal product instead of steel or rubber lined pipe and elbow.
Advantages:
1. Good abrasion resistance
The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks.
2. Little loss during running
3. Low project cost
Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project.
The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system!
We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production.
This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off.
After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience.
Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times.
It is the ideal product instead of steel or rubber lined pipe and elbow.
Advantages:
1. Good abrasion resistance
The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks.
2. Little loss during running
3. Low project cost
Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project.
The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system!
We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production.
This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off.
After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience.
Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times.
It is the ideal product instead of steel or rubber lined pipe and elbow.
Advantages:
1. Good abrasion resistance
The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks.
2. Little loss during running
3. Low project cost
Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project.
The wear-resistant ceramic ball is also called alumina wear-resistant ball, and is mainly used for polishing the grinding body of fine pulverizing equipment such as smashing, ball mill, pot mill, vibrating mill. The wear-resistant ceramic ball has the advantages of high hardness, large bulk density, corrosion resistance, etc. Its pulverization efficiency and wear resistance are much better than ordinary ball stone or natural pebbles, and they are widely used in ceramics, glass, enamel, pigment, chemical and other industries.
Wear-resistant ceramic balls can be divided into ordinary wear-resistant ceramic balls and high alumina wear-resistant ceramic balls. The main difference between the two is the content of alumina. The alumina content of ordinary wear-resistant ceramic balls is about 20%, and the appearance is grayish white. It is mostly used for polishing and smashing ceramics and enamel products (such as floor tile manufacturers). The high alumina wear-resistant ceramic ball is mostly used for grinding. The alumina content is more than 90%, the color is milky white, and the higher the alumina content, the whiter the color, the hardness, temperature resistance and corrosion resistance of the ordinary wear-resistant ball. They mainly used for rough grinding, fine grinding and splitting of thick and hard materials. The production of high alumina porcelain polished stone needs to be polished with high alumina wear-resistant ceramic balls, so that the products can be white, flawless and excellent in polishing effect.
YINENG brand Cutters are widely used for different markets: leisure fashion suits,children's garments,suits,knitting casual/leisure suits, underwear ,swimsuit,corsage,seat cushion,massage chair,yacht/houseboat seat,shoes,cat,cold protective clothing,golf bag,handbag,home textiles,cow-bag,sleeping bag,tent, apparel,automotive, and furniture and soft fabric as well as other industries.
Clear Acrylic Lucite Legs 5"H Tapered for Sofa, Cabinet and Furniture by Alpha Furnishings Affordable DIY 4PC
4PC Set Lucite Acrylic Furniture leg. Height:5",Tapered appr. 2"-1.5"D, Top with 7/16" thick acrylic plate, 3/16" hole
Weight Capacity of approx. 150 lbs per leg.
Beautiful, sleek and modern!
Great for Sofas, Cabinets, Entertainments Centers, and More!
DIY made affordable and easy-small spending large return-Instant face-lift for your dated furnitures!
1.Quick Details
1Place of Origin:Fujian, China (Mainland)
2Type:Ceramic Parts
3Application:Industrial Ceramic
4Material:Alumina Ceramic, 92%,94%,96%,99% alumina
5Model Number:INC
6Brand Name:INNOVACERA
7Color:White/Ivory
8Density:3.8g/cm3
9Compressive strength:2500
10Flexural Strength:358Mpa
11Vickers Hardness:11-14 Gpa
12Maximum Use Temperature:1650°C
13Bulk density:3.1
14Thermal Conductivity:24.7
15Thermal Shock Resistance:200-250 TC
2.Appications
Aluminum ceramics are widely used in electronics and electrical engineering, metallurgical processes, chemical technologies, medical technologies, mechanical engineering, military equipment.
Aluminum ceramics are used for manufacturing insulators, capacitors, resistors, furnace tubes, sealing refractory parts, foundry shapes, wear pads, thermocouple protection tubes, cutting tools and polishing/grinding powders, ballistic armor, laboratory equipment, bio-ceramic parts for orthopedic and dental surgery, bearings.
3.We are a supplier of precision ceramics.
All products can be customized according to customer requirements.
my mail address isvivian@innovacera.com
If you want to know more products, please feel free to contact me.
