The magnetic liner is composed of ferrite and modified nonmagnetic steel and is arranged in an alternative order of N and S poles of the magnetic system on the curved surface. When the ball mill operates, the magnetic liners attract the broken balls and magnetic mineral onto the surface to form a certain thickness of protection layer to prevent the tumbling media and fine ore from directly contacting the liners, which lengthening the service life of the liners. When installed, the magnetic liners are directly attached onto the inner wall of the cylinder with no bolts. It is widely used for all kinds of minerals with strong, medium and weak magnetism. If it is used for non-magnetic materials, certain quantity of ferromagnetic substances such as broken steel balls and iron scrap must be added regularly so as to form a protective layer.
Vanadium can improve the strength, flexibility, extensibility, heat resistance of steel. Vanadium is the main refining grain in common low alloy steel to improve the strength of steel and avoid aging of steel. 100kg per iron bucket or as per buyers request
Jihe micro silica jh85 Jh85 is a densified dry powder admixture for portland cement concrete And mortars. Jh85 is primarily consisted of fine silicon dioxide particles in a noncrystalline Form. Jh85 meets the requirements of astm c-1240 and contains A minimum of 85% silicon dioxide (sio2) Parameters standard value : Silicon dioxide(sio2) min 85 % Loss on ignition (l.O.I) at 975¡æ max 4 % Moisture content max 3 % Percent retained on 45|¨¬m (325 sieve) max 2 % Bulk density 250-300 kg/m3 and 600-800 kg/m3 Usage:jh85 is usually for cement and concrete. Jihe micro silica jh90 Jh90 is a pozzolanic material that consists primarily Of fine silicon dioxide particles in a non-crystalline form. Jh90 meets the requirements of astm c-1240 and contains Minimum of 90% silicon dioxide (sio2) Loss on ignition (l.O.I) max 3 % Moisture content(h2o ) max 1.0 % Percent retained on 45|¨¬m (325 sieve) max 2.0 % Package: more than 600kg/jumbo bags 25kg small plastic woven bags. (according to your demand) Jh90 is used in cement, concrete, refractory and construction Materials. 900kg/ jumbo bag or 25kg/ small bag
1.Chemical composition: Grade Pb Min Ag Max Cu Max Bi Max As Max Sb Max Sn Max Zn Max Fe Max Cd Max Ni Max Total Pb99.994 99.994 0.0008 0.001 0.004 0.0005 0.0008 0.0005 0.0004 0.0005 - - 0.006 Pb99.990 99.990 0.0015 0.001 0.010 0.0005 0.0008 0.0005 0.0004 0.0010 0.0002 0.0002 0.010 Pb99.985 99.985 0.0025 0.001 0.015 0.0005 0.0008 0.0005 0.0004 0.0010 0.0002 0.0005 0.015 Pb99.970 99.970 0.0050 0.003 0.030 0.0010 0.0010 0.0010 0.0005 0.0020 0.0010 0.0010 0.030 Pb99.940 99.940 0.0080 0.005 0.060 0.0010 0.0010 0.0010 0.0005 0.0020 0.0010 0.0020 0.060 2.Usage: it is mainly used for making special type of lead alloys, lead sub oxide and semi conductors 3.Specification: as a specialized manufacturer and exporter for lead ingot. We will offer it with high quality and competitive price. If you are interested in our lead ingot, please let me know your quantities, specification. We could produce any content of lead ingot you need. Such as 99.97%, 99.99%, 99.999%and so on. 4.Package: 1mt/pallet, or as customer's requirements. 1
Hydrofluoric acid (%) 70%min Fluorosilicate sif6(%) 0.02%max So4(%) 0.02%max Ignition residue content(%) 0.002%max Package in 25kgs drum without pallet or In 200l drum with pallet
Items 98% Ammonium bifluoride nh4hf2) (dry basis) 98.00%min Loss on drying 1.6%max Ignition residue 0.10%max Sulphate(so4) 0.10%max Ammonium fluorosilicate[(nh4)2sif6] 0.80%max Packae in 25kgs woven bag without pallet pr with pallet
Talc powder (used in ceramics, paper, coating, plastic, cosmetic Packing: 25kg paper bage
Our products with the greatest quality, high whiteness and lower impurities are made wide range of making paper, plastic, medicine, paint, rubber, food etc., are sold to 15 provinces and zones in china, and japan, korea and so on east-asia area and mid-east area. Talc is hydrated magnesium silicate, it is a versatile material, also know as steatite or soapstone with the chemical formulation of mg3 si4 o10 (oh)2. We have excellent quality talc of 300 mesh to 5 micron particle size, with whiteness varying from 85% to 99%. Due to its softness, chemical inertness and adsorption properties it is widely used as anti-sticking, anti-caking lubricant and as thickener in rubber, paint, plastic, paper and cosmetic industries as a filler / extender. 25kg paper bage
Our company is a professional manufacturer of magnesium extrusions in rods, bars, solid shapes, structural shapes, wires, tubes, hollow shapes and semi-hollow shapes. We are offered in a variety of standard alloys and forms as well as many special shapes tailored to a customer's particular requirements. Alloys available: zm21, az31b, az61a, az80a zk60a, we54a and we43a.
Extruded magnesium alloy bars, profiles and tubes Our company is a professional manufacturer of magnesium extrusions in rods, bars, solid shapes, structural shapes, wires, tubes, hollow shapes and semi-hollow shapes. We are offered in a variety of standard alloys and forms as well as many special shapes tailored to a customer's particular requirements. Alloys available: zm21, az31b, az61a, az80a zk60a, we54a and we43a.
The mg alloy has the good specification of casting, pressing, cutting, welding and processing, it can be processed into a plate, strip, tube, rod, bar and wire etc. Semi-continuous casting magnesium alloy rod:70-600 mm( dia.) Deformed magnesium alloy plate:10-300 mm(width), 0.5-100 mm(thickness) Deformed magnesium alloy shapes: 10-140 mm(dia.)
1. Lower specific gravity and negative potential. 2. High driving voltage to the iron and lower current efficiency. 3. Large generating capacity per unit and long service life.
Undensified silica fume cl85 cl88 cl90 cl92 cl93 Densified silica fume cl85 cl88 cl90 cl92 cl93 Micro silica packaging Option 1. 25kg/degradable bag; 40bags/pallet, 750-840bags/20gp Option 2. 1000kg/bag; (2bag/pallet, 20bags/20gp) Option 3. 900kg/bag or 950kg/bag (2bag/pallet, 16-18bags/20gp)
Features: It has characters of narrow particle size distribution, high grinding efficiency and good polishing effect. Its grinding efficiency is much better than soft abrasives, like silica. Because of its good particle shape, high smoothness after surface treatment and better polishing effect than white fused alumina, it is widely used to polish aluminum product, steel product, stainless steel, stone, glass, wall and floor tiles, etc. Since it entered the market, it has got praise from the users. It shows its great polishing performance especially in the field of metallic materials, like stainless steel,
Features: Its primary crystal is very small. It has good filling property and sintering activity. Aqueous slurry has good thixotropic fluidity. It can improve the sintered density, flexural and compressive strength of castables at high temperature. It can also enhance the castbles¡¡¥ resistance to abrasion, corrosion and erosion. Applications: It can be used in castables of low cement, ultra low cement or no cement and shaped or unshaped refractory materials, etc Main technical parameters for tm-nb series superfine activated alpha-alumina special for refractory castable:
Size 0-550 microns (30mesh) Bulk density 0.3-0.5g/cm©ø True density 0.90-0.95g/cm©ø Compressive strength 28mpa min Moisture 0.5% max Floating rate 95% min by volume Specific density: 0.90-0.95g/cc Appearance grey/white powder Mosh scale 5-7 Ph 6 Coefficient of heat conductivity 0.054-0.095w/m.K Refractive index 1.54 Melting point 1400¡é min Loss on ignition at 1000¡é < 3% Refractoriness 1550-1750¡é 25kg/pp bag
Specification: F 52~53 % min Al 12~13% min Na 32~33% max Sio2 0.25~0.36% max Fe2o3 0.05~0.08% max So42- 0.6~1.0% max Cao 0.15~0.20% max P2o5 0.02~0.03% max H2o 0.20~0.40% max In 50kgs or 1000 kgs plastic woven bag lined with high-pressure plastic film, or according to customer's requirements.
F: 60% min Al: 31.0% min Na: 0.40% max Sio2: 0.30% max Fe2o3: 0.10% max So2-4: 0.60% max P2o5: 0.04% max Ignition loss: 1.0% max N 50kgs or 1000kgs pp bags, lined with high-pressure plastic film, or according to contract’s requirements
Brief introduction: Ferrovanadium which consists of vanadium and iron is widely used in steelmaking as the alloy additive, high-vanadium ferrovanadium could be used as the additive in the non-ferrous alloy. The most commonly used including 40% fev, 60%fev and 80% fev. Ferrovanadium is a significant additive in steelmaking industry, which can enchance the strength, toughness, ductility and heat resisting property of the steel. Application: ferrovanadium is applicable to act as the tungsten additive in steel smelting or alloy materials. Product: delivery as lump, the largest lump is no more than 8kg and some of the lumps that its particle size is less than 10*10mm are no more than 3%.
Basic info. Model no.: 99.99% Alloy or not: Non-alloy Secondary or not: Non-secondary Weight: 7.5kg/ingot Export markets: Global Additional info. Packing: 7.5kg/ ingot, 1000kg/bundle in wooden case Standard: Sgs, ciq Origin: China Hs code: 81041100 Production capacity: 1000ton/month Product description Packaging detail: about 1000kgs/mg pallet covering with plastic bag, or according to customer's requirement Delivery detail: within 20 days Specifications High purity magnesium ingots 99.99 1, standard: gb/t 3499-2003 2, high quality. 3, competitive price 4, steady supply ability 7.5kg mg ingot with purity 99.90%min 1. 7.5kg¡À 0.5 each ingot, 1-1.3mt per magnesium pallet or wooden pallet. Size, weight, package can be made according to the buys request. 2. Usage: Widely used in national defence. Chemical. Casting. Shipping. Astrogate. Photogtaph. Etc. It is the basic materials of producing magnesiumseries products. 7.5kg mg ingot with purity 99.90%min
