VN3-12E indoor medium-voltage AC vacuum circuit breaker is a newest product designed by our company which is applicable to 3-phases AC50Hz, 12kV indoor switch systems. The product is with characteristics of smaller volume, reliable insulation, no pollution, long time free maintenance and so on. It is produced with standardized circuit breaker assembly line and has good performance and perfect quality. 1. Equipped with modularized operating mechanism which make the maintenance and the replacing are more convenient. The replace of module do not affect the dynamic capability and also shorten the power-off duration. 2. The interrupter and primary circuit are sealed in the epoxy resin, which makes the circuit breaker is more reliable 3. The pole using convected and ventilated technique and lower resistance vacuum circuit breaker limit the temperature rising because of circuit breaker working for a long time and also reduce the power loss. 4. The operating mechanism is designed uniquely and avoids the moving contact over-rebounding when the circuit breaker is opened and prolong the vacuum interrupter mechanical life. 5. Past the type test according to the national standards such as GB, DL, international standards of IEC, CEI, DIN, VDE and other major industrialized countries.
VN2-24 indoor high voltage AC vacuum circuit breaker is a new designed our which is applicable to air-insulated indoor switch system. The whole structure is assembled with the switch body and operating mechanism. It is produced with standardized circuit breaker assembly line and has good performance and perfect quality. 1. Have a wide range with rated current from 630a to 3150a and rated short-circuit breaking current from 20ka to 31.5ka. The mechanical life can be up to 20000 cycles. 2. Be intended for indoor installation in air-insulated switchgear and have fixed version or withdraw able version. 3. Have perfect switching-capacity which can handle any condition arising from switching of equipments and components under normal operating or fault conditions particularly short-circuit and over-load. 4. Adopt coopers vacuum interrupter which is smaller volume, lower resistance, longer lifetime, better atmosphered technique, more perfect insulation and higher breaking capacity. 5. Be with more perfect external insulation because of the vacuum interrupter and main circuit being cast in epoxy resin poles. 6. Comply with stipulations defined in standards of gb, gl, iec, cei, din, vde and other major industrialized countries.
VN1-40.5E medium-voltage AC vacuum circuit breaker is a new product designed by our company. The main circuit is with the solid insulated structure and uses the advanced epoxy resin sealed technology. Firstly it assembles a integrated sealed pole column with the vacuum interrupter, the main circuit, the insulated support and so on, which enhances the environment endurance of the vacuum circuit breaker. 1. The main circuit section and operating mechanism section is upper and lower arrangement, which optimize the electric field distribution, increase the insulated reliability, also reduce the circuit breaker depth direction size and reduce the matched switchgear depth greatly. 2. The live part of main circuit is cast in the epoxy resin cylinder, which make the interrupter be exempt from the environmental effect and the external mechanical force injury, also cause the circuit breaker no arc-over between phases and on the interrupter's surface and enhance the insulation of circuit breaker. 3.Current carries are fixed reliably in the position by the epoxy resin, do not need the extra fastener, reduce the number of accessories used for assembling circuit breaker pole columns, reduce the installation error and enhance the reliability of installing the circuit breaker. 4. As a result of using the sealed technology, the circuit breaker volume reduces greatly. The matched cabinet width is only 1200mm, heighten 2400mm, depth 2600mm. 5. The VN1 circuit breaker is based on the self-supporting structure of bottom plate, has overcome the primary contacts linking due to the circuit breaker submersion and also transport conveniently.
MCB Three-Phase Switch Electrical Circuit Breaker 3PAir Switch 100A Overload Protection Please contact us for further information!
Household Mini Leakage Circuit Breaker 60amp 2P 50Hz/60HZ Overload Protection Please contact us for further information!
1P Miniature Electric DC Circuit Breaker 60A Single Phase Main Circuit Breaker Please contact us for further information!
Molded components for circuit breaker.
Electrical appliance involves series of vacuum circuit breaker, outdoor h.V. Falling fuse box, lighting arrester, outdoor isolating switch, indoor load switch, synthetic rubber insulator.
Switchgear and vacuum circuit breaker.
Vacuum circuit breaker and spring drive mechanism, switch, isolator..
Socket, plug, switch, circuit breaker, thermostat, light, electric.
Integrative gather frame, integrating audio, digit and optical fibers,i s an integrated equipment that completes the connection between external cables and program-controlled switchboards, between two digital multiplex equipment as well as between external cables and optical communication equipment. It is applied to communication systems of distant stations, module offices and commercial bulidings, etc.
Low voltage electrical equipment, miniature circuit breaker, RCBO, switch and socket, industrial plug and socket.
H beam cutter supply voltage 220/50 v/hz, cutting thickness:6-60mm, cutting width:150-800mm, cutting speed:50-750mm/min, overall dimension 25*17.6*26cm, weight:30kgs * the main body is made of aluminum and features compact in structure. * speed sysytem is adjusted by integrate circuit, operations by key touching * can be used for bevel and groove cutting * especially for h beam and slotware, etc. * applied to mechanical and metal structure plant, etc. 1pc/ctn 390*230*370mm G.W/n.W:14/10kg
Our old Greek customer, Evander, emailed me in November last year that he sent me a sample of hydraulic cartridge relief valve, and stressing that it was not his, but one of his partners, Ptolemy, and also attached Ptolemy's contact information. After receiving the sample and communicating with Ptolemy, we learned that the hydraulic cartridge relief valve was produced by a local cartridge valve manufacturer in Greek and installed in their hydraulic cylinder, which was unstable. Their engineers said that the root cause was the high back pressure of the hydraulic system and the insensitive opening of the hydraulic cartridge valve. We can't determine the hidden dangers of the hydraulic cartridge valve just according to the original sample. I suggested Evander sending us the video of abnormal hydraulic cylinder, the drawing of hydraulic cartridge valve, and the schematic of the system. After discussing, AAK engineers advised that the problem can only be solved by reducing the opening back pressure resistance of the hydraulic cartridge valve. Perhaps because of Evander's endorsement, Ptolemy paid the development fee on the second day. I have always believed that for industrial products such as hydraulic cartridge valves, it is difficult to get the order without trust. With trust and reliable manufacturing quality, it is easy to get the order. After 40 days, AAK sent 20 samples of hydraulic cartridge valve. Yesterday, Ptolemy emailed me that AAK hydraulic cartridge relief valve was used on the hydraulic cylinder. The prototype operated stably and the hydraulic cartridge valve opened sensitively. AAK hydraulic cartridge valve is stable and sensitive under high back pressure. We optimized the structure of the original hydraulic cartridge relief valve from 3 aspects. 1. The valve sleeve of the hydraulic cartridge relief valve has an oil inlet cavity, and the outer circle of the valve sleeve is provided with a plurality of annular through holes as oil outlet, and oblique holes are set to control the oil outlet. 2. The middle part of the main valve spool is provided with a small hole connecting the oil inlet cavity and the inclined hole, and the main valve spool can slide in the valve body to form a spring cavity that is relatively closed to the oil inlet cavity, and the spring cavity is equipped with a pressure regulating spring. 3. The left end of the valve body is installed with an adjustable rod that can be rotated and retracted and has a lock nut. The pressure regulating spring on the adjusting rod is connected to the main valve spool. The outer diameter of the right end of the valve body is provided with a sealing groove to place the sealing ring group. Two sealing grooves are set on the left side of the external thread of the valve body, and the sealing ring group is placed to seal the connection with the socket to prevent oil leakage. The optimized AAK hydraulic cartridge relief valve equalizes the pressure difference
Circular gas cutter (size:120*34*70cm, surry voltage:220v, 50hz, cutting thickness:6-60mm, cutting circle:200-600mm(outer dia) 100-500mm(inner dia), cutting Speed:0.2-6.0 r/p/m, cutting speed
Working hours: 12 hours Effective sunshine hours: 6 hours Continous cloudy days: 7-8 days(when the battery is full) 1. Conbine solar panel with the micro-computer intellectual controller to transfer the light energy to electricity energy. 2. The microcomputer intelllectual controller is made up of advanced special-sued integrated circuit with high conversion effeciency, preventing from overcharge, overdischarge, withoutput short circuit protection, greatly extending the lifetime of the battery, safe srale and easy to use. 3. High effective Non-maintance storage battery, strong storage function can use a long time 4. Automatic tracking time controller, can automatically adjust the tern on time in accordance with different illumination time in various seasons and use energy saving intellectual controller. In order to longer the lighting time, the controller will automatic shut-off part of the light at deep-night. Item number Component name Specifications 1 light pole 1.the height is 8.0m ¦Ä: 4.0mm 2.steel with hot-dip galvanizing spray treatment, anti-rust, anti-corrosion 3.conform to national acceptance standard Q235 4.resistant to the largest wind power for more than 12 grade 5. up dimeter is 180mm,bottom dimeter is 76mm 2 solar panel polycrystalline solar panel: 100W *2 optimal operating voltage: 17.5V optimal operating current: 5.88A dimension(mm): 1480*670*35 Warranty: 2 years, 10 years 90% of the power, 25 years 80% of the power 3 lighting head LED: 45W, DC12V Warranty: 2 years 4 two-controller DC 12V, it is micro-computer intelligently controlled, preventing from overcharging, overdischarging and output short, it can also switch on or switch off automatically according to the level of darkness. It adopts both light control and time control. Warranty: 3 years 5 storage battery maintenance free GEL battery, DC12V, 180AH Lifetime: 4-5years Warranty: 2 years 6 mounting bracket hot-dip galvanizing spray treatment, anti-rust, anti-corrosion 7 battery case iron with hot-dip galvanizing spray treatment 8 cables and other accessaries
Concrete block making machine Parameter: Max block dimension (mm): 1000*600*40~200 Dimension: 6, 900*3, 800*2, 660 mm Pallet/plate size (mm): 870*870*25 (bamboo) 870*870*20 (pvc) Power: 33.7 kw Weight: 10, 000 kg Vibration frequency: 50-90 hz Max excited force: 80 kn Molding cycle: 15-20 days Installed capacity: 31.7 kw Product discriptionsú¦ 1. Integrative storage and distribution system makes dosing precision and density of bricks/blocks possible. 2. The specific design of feeding: it adopts the positive and compulsory arch acentric feeding technology. Under the help of material distribution bar (that is, mixer fork), it can setting the material into the mould box quickly and uniformly. 3. Integrated oil circuit system: it is designed by international standards, high durability, weather-resistant, low energy consumption and uses imported units. The reasonale design of the oil circuit can make full use of the energy consumption to 90%. 4. Computer control system: it is plc control system imported, with man-machine interface, liquid crystal display, intelligent control, malfunction self-diagnosis and remote control. It is very simple to operate and safe to use. 5. Durable design: it applies specific welding craftwork to make it more consistent and durable. 6. Combinatory sencodary material distributor: it can be assembled variously to meet different requirements range from 6 cm to 9 cm, single color or double colors. Dimension: 6, 900*3, 800*2, 660 mm Weight: 10, 000 kg
Descriptions   A "CAT6 UTP unshielded 8P8C AP style 180 degree Keystone jack" refers to a type of network connector that is used primarily in structured cabling environments, such as in Ethernet networks. Here's a breakdown of what each term typically means: CAT6 UTP 8P8C AP style 180 degree Keystone jack In summary, a "CAT6 UTP unshielded 8P8C AP style 180 degree Keystone jack" is a specific type of connector designed for Category 6 Ethernet cables without shielding, featuring an eight-pin, eight-contact configuration (RJ45), with a specific style (possibly angled pin or other design feature) and a 180-degree termination. These keystone jacks are commonly used in structured cabling systems to provide reliable Ethernet connectivity. Main Features   The main features of a "CAT6 UTP unshielded 8P8C AP style 180 degree Keystone jack" include: Keystone Form Factor: The keystone form factor allows for easy snap-in installation into keystone wall plates, patch panels, or other standardized mounting hardware. This modularity facilitates flexibility in configuring and managing network connections. Reliability and Performance: These jacks are engineered to provide reliable Ethernet connectivity with minimal signal loss, ensuring optimal performance for high-speed data networks. In essence, the main feature of a "CAT6 UTP unshielded 8P8C AP style 180 degree Keystone jack" is its ability to provide high-performance Ethernet connectivity in a standard form factor that is easy to install and compatible with Category 6 cables. It combines robust construction with specific design features to meet the demands of modern network infrastructure. Order Data: TP-5209-C6U8 Descriptions: Keystone jack, CAT6, UTP, 8P8C, 180 degree, AP style
Descriptions   An 80x80mm 2 port RJ45 network French faceplate is a wall-mounted plate used in networking installations, designed for French standards. Hereâ??s what each component typically refers to: Faceplate: This is the main component that mounts onto the wall. It usually has slots or ports where inserts can be placed. Faceplate Insert: Inserts fit into the faceplate and provide the actual ports or connectors. In your case, the inserts are designed for RJ45 connectors, which are commonly used for Ethernet networking. Keystone Jack: A keystone jack is a type of connector used in networking and telecommunications. It snaps into a compatible insert or faceplate. For RJ45 connectors, the keystone jack provides a standardized connection point for Ethernet cables. Therefore, an 80x80mm 2 port RJ45 network French faceplate is compatible with faceplate inserts and keystone jacks designed for RJ45 connectors. This setup allows you to customize the faceplate with the specific number of RJ45 ports you need for networking purposes, adhering to French standards for size and compatibility. Main Features   The main features of an 80x80mm 2 port RJ45 network French faceplate include: Size and Design: It is specifically designed to fit within the standard dimensions of 80x80mm, which is common for electrical and networking faceplates in France. Port Configuration: It typically supports 2 ports for RJ45 connectors. This means it can accommodate up to 2 Ethernet connections or other networking applications using RJ45 connectors. Modularity: The faceplate is modular, allowing you to insert and customize with different types of inserts. This flexibility lets you choose the specific connectors (like RJ45 keystone jacks) that suit your networking needs. Material and Durability: It is usually made from durable materials such as plastic or metal, ensuring longevity and resistance to wear and tear. Compatibility: Designed to meet French standards, it ensures compatibility with other networking components and infrastructure commonly used in France. Ease of Installation: The faceplate is designed for easy installation on standard electrical boxes or mounting brackets, making it straightforward to integrate into network installations. Aesthetics: It often features a clean and professional appearance, blending with modern interiors and electrical installations commonly found in French households or businesses. Overall, these features make the 80x80mm 2 port RJ45 network French faceplate a versatile and essential component for networking setups, providing a standardized and customizable solution for RJ45 connectivity in France. Order Data Item No: TP-5009-2FR80 Descriptions: 2-port faceplate, 80x80mm, French style, without insert
