Pneumatic components, air filter regulator combination, air lubricator, afr combination, lubricator & frl, pneumatic filtting, air source treatments, filters and regulators, solenoid valves, standard cylinders, hydraulic cylinder, pressure gauge, pu tube, hydraulic components auto drain valve and oil window series.
Tire valves, tube patches, tire seals, wheel balance weights, tire repaired tools, tire gauges, air tools, garage equipment & tools.
Pneumatic components, air filters, regulators, lubricator, F.R.L. units, filter regulators, solenoid valve, air cylinder, standard cylinder, pneumatic fittings..
Coil, din connectors, solenoid valves, angle valves, and, pneumatic actuators.
Pneumatic cylinder, solenoid valve, air source treatment, pneumatic fittings, pneumatic components, air cylinder, frl, filter, regulator, valve, fittings, air units, air filter, air preparation units.
Oil seals, rubber gasket, o rings, valve seals.
Pneumatic components like pneumatic cylinder, pneumatic fitting, air source treatment, solenoid valve.FOB, CFR, CIF
Pneumatic components: air preparation elements, solenoid valve, pneumatic valve, mechanical valve, iso6431/6432 cylinder, compact cylinder, micro-cylinder.
Valves, air souce treatment unit, cylinder.
PSI booster pump, electromagnetic valve, filter.
Hydraulic,ball valve, inline valve.
Solenoid valve pneumatic actuator pneumatic cylinder air source tretament unit.
For Hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV12-34, Russian Customer placed annual order with AAK again Early Last year, a Russian customer placed their trial order with AAK for a hydraulic solenoid cartridge valve equivalent to HydraForce SV12-34. It is a solenoid operated, two position, three way, direct acting spool valve. Last November, for the testing result was very good, the customer was very happy and placed their annual order with us for the year of 2024. 1 year has passed, they received positive feedback from market, the sales for this hydraulic solenoid cartridge valve are very stable and they are going to be out of stock in 2 months. Per customer, they will place their annual order with us for E-SV12-34 next week for the sales in 2025. AAK hydraulic solenoid cartridge valve E-SV12-34 two advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV12-34 hydraulic solenoid cartridge valve: Max.Pressure Rating: 240 bar (3500 psi) Flow Rating: 60 lpm (16 gpm) Max. Internal Leakage: 410 cc/minute (25 cu. in./minute) max. at 207 bar (3000 psi) Temperature: - 40 ~ + 120 (Std. Buna N Seals) Cavity: VC12-3 AAK E-SV12-34 hydraulic solenoid cartridge valve, benchmarking HydraForce SV12-34, has been approved by customer in Russia. its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (819) 2024-10-21
AAK Hydraulic Solenoid Cartridge Valve is equivalent to HydraForce SV08-20. Several US customers repeat the orders 2 3 times a year Recently, we received the repeat order from a customer in the United States for a hydraulic solenoid cartridge valve equivalent to Hydraforce SV08-20 again. It is a solenoid-operated, 2-way, normally closed, poppet-type, screw in hydraulic cartridge valve, with standard and manual override options. This valve is intended as a blocking or load holding device for low flow circuits having pull-only manual override requirements for handles or cable linkage. This is a standard part and commonly used. Till now, AAK hydraulic solenoid cartridge valve E-SV08-20 has been shipped to several customers in the United States. Its quality and stability has been approved by these customers. Some of them repeat the orders 2 â?? 3 times a year. The advantages of AAK Hydraulic Solenoid Cartridge Valve E-SV08-20 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve: Pressure Rating: 207 bar (3000 psi) Flow Rating: 23 lpm (6 gpm) Max.Internal Leakage: 0.15 ml/min (3 drops/min) max. at 207 bar (3000 psi) Temperature: - 40 â?? ~ + 120 â?? with Buna N seals Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VC08-2 AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve, benchmarking HydraForce SV08-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (818) 2024-10-14
Hydraulic Pilot Operated Relief Valve equivalent to HydraForce RV10-28 passed testing, AAK received mass production order from customer in Turkey 4 months ago in May, we shipped a 2 pcs of test order for a pilot operated relief valve equivalent to HydraForce RV10-28 to a new customer in Turkey. It is a screw-in, cartridge style, pilot operated, relief valve with reverse free flow check valve, intended for use as a pressure limiting device in demanding hydraulic circuits which require fast response, low hysteresis, low leakage, low pressure override and reverse free flow features. This customer tried another hydraulic cartridge valve manufacturer in Ningbo China 1 year ago, but failed due to quality, then they placed the 2 pcs of trial order with AAK this May in despite of AAK price is 15% higher. Last Friday, we were advised by customer that AAK samples passed testing and have been performing very well, and received their mass production order for 500 pcs. The advantages of AAK Hydraulic Pilot Operated Relief Valve E-RV10-28 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-RV10-28 Hydraulic Pilot Operated Relief Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 113 lpm (30 gpm) Max. Internal Leakage: 0.50 ml/min (10 drops/min) max. at to 80% of nominal setting Cavity: VC10-2 AAK E-RV10-28 Hydraulic Pilot Operated Relief Valve, benchmarking HydraForce RV10-28, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (816) 2024-09-30
After tested by customers in USA and Russia for 1 year, AAK Proportional Solenoid Valve has been approved to be equivalent to original HydraForce SP08-20 Last September, we launched a proportional solenoid valve equivalent to HydraForce standard part SP08-20. A solenoid-operated, 2 port, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. As mentioned in our article last year on 03/27/2023, AAK spent 6 months, 3 times material changes, 4 times testing to produce E-SP08-20 Solenoid Proportional Valve successfully. During the past year, we shipped test orders to customers in the United States and Russia. The Russian customer placed their regular order in August, and the American customer placed their regular order last week. The function and performance of AAK E-SP08-20 has been approved to be completely equivalent to original HydraForce SP08-20. AAK hydraulic proportional solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP08-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 207 bar (3000 psi) Flow: 22 lpm (6 gpm) Internal Leakage: 5 drops/min max. at 207 bar (3000 psi) Operating Fluid Temperature: - 40 to 120 �°C (with Standard Buna N seals) Cavity: VC08-2 AAK E-SP08-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP08-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (812) 2024-09-02
For Proportional Solenoid Valve equivalent to HydraForce SP10-20, AAK received re-peat orders from the 3rd customer within 18 months Last April, we launched a proportional solenoid valve equivalent to HydraForce standard part SP10-20. It is a solenoid-operated, 2-way, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. Proportional valves are the ceiling of hydraulic cartridge valve manufacturers. Among more than 100 hydraulic cartridge valve manufacturers in Zhejiang Province, China, there are no more than 5 manufacturers who can produce proportional valves, with a proportion of less than 5%. However, AAK not only has SP10-20, but we have developed more than 10 models of proportional valves. Since E-SP10-20 proportional solenoid valve was posted, we have received the re-peat orders from 3 customers till now. Within 18 months, total 3 foreign customers tested AAK samples and place the re-peat orders, which proves that the E-SP10-20 proportional solenoid valves shipped by AAK has very stable quality and good performance. AAK hydraulic cartridge solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP10-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 250 bar (3625 psi) Flow: 60 lpm (15 gpm) Internal Leakage: 5 drops/min max. at 250 bar (3625 psi) Operating Fluid Temperature: - 40 to 100 �°C (with Standard Buna N seals) Cavity: 10-2 AAK E-SP10-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP10-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (810) 2024-08-19
For Pilot-Operated Pressure Reducing/Relieving Valve equivalent to SUN PPDB, AAK received the re-peat order from customer in Europe again In July of 2022, we shipped a Pilot-Operated Pressure Reducing/Relieving Valve equivalent to SUN PPDB to a customer in Europe. In April of 2023, the customer placed their re-peat order for PPDB. In July of 2024, we received the re-peat order from this European customer again for PPDB. Actually, besides Europe, this model PPDB has been shipped to Brazil, Russia and the United States, which proves that AAK quality has been approved by foreign customers in different countries. The advantages of this pilot operated pressure reducing/relieving valve are: 1. The quality of this valve is benchmarking SUN Hydraulics, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-PPDB Hydraulic Pilot-operated, pressure reducing/relieving valve: Max. Operating Pressure: 350 bar (5000 psi) Capacity: 10 gpm (40L/min) Control Pilot Flow: 7 - 10 in�³/min. Cavity: T-11A AAK E-PPDB hydraulic Pilot-Operated, Pressure Reducing/Relieving Valve, benchmarking SUN Hydraulics PPDB, its service life is 2 times that of its domestic peers. You are welcome to give it a try.
For Hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV10-28, AAK has shipped to several foreign countries for several times So far this year, we received inquiries for a hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV10-28 from several customers in USA, Canada, Russia, Germany, Poland and India. It is a solenoid-operated, 2 way, normally closed, bi-directional, screw-in hydraulic cartridge valve, designed to function as a load holding or blocking valve in applications requiring low internal leakage bi-directionally. Till now, we have shipped this hydraulic solenoid cartridge valves to several foreign countries. Some of them have placed the reorders for several times. In Ningbo China, there are several hydraulic cartridge valve manufacturers who have this model. AAK has been proved to be the best choice with its excellent quality. The advantages of AAK Hydraulic Solenoid Cartridge Valve E-SV10-28 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV10-28 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 38 lpm (10 gpm) Max.Internal Leakage: 5 drops/min @ 207 bar (3000 psi) Cavity: VC10-2 AAK E-SV10-28 Hydraulic Solenoid Cartridge Valve 2 port, normally closed bidirectional blocking, benchmarking HydraForce SV10-28, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (807) 2024-07-29
For Hydraulic Pressure Reducing/Relieving Proportional Valve equivalent to HydraForce TS10-36, AAK received official order from an old customer in the USA Last June, one of our old customers in USA placed a test order for a hydraulic Pressure Reducing/Relieving Proportional Valve equivalent to HydraForce TS10-36. It is a screw-in, cartridge style, pilot-operated, spool-type, proportional pressure reducing/relieving valve which can be infinitely adjusted across a prescribed range using a variable electric input. The regulated pressure is proportional to the input electrical current. In Ningbo China, there are other hydraulic cartridge valve manufacturers who have this model, and AAK price is not the most competitive one, but because the valves that they purchased from AAK in the past have very stable quality, they do not want to take risk to try other hydraulic cartridge valve manufacturers, especially this is a proportional valve, which is not easy, so they still placed the trial order with AAK. Till now, it has been 1 year since the trial order was shipped. Last week, AAK received the official order of 200 pcs qty from the customer. The advantages of AAK Hydraulic Pressure Reducing/Relieving Proportional Valve E-TS10-36 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-TS10-36 Hydraulic Pressure Reducing/Relieving Proportional Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 56.8 lpm (15 gpm) Max.Control Current: 12 VDC coil - 1.10 A; 24 VDC coil - 0.55 A Relief Pressure Range (from zero to maximum control current): A: 6.9 - 207 bar (100 - 3000 psi) B: 6.9 - 159 bar (100 - 2300 psi) C: 6.9 - 117 bar (100 - 1700 psi) Cavity: VC10-3 AAK E-TS10-36 Hydraulic Pressure Reducing/Relieving Proportional Valve, benchmarking HydraForce TS10-36, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (805) 2024-07-15