Solenoid valve, solenoid vibration pump.
Shackle turnbuckle thimble wire rope clip hook snap hook quick link eye nut eye bolt chain.
The Hydraulic Screw-in Cartridge Direct-Acting Relief Valve, equivalent to VIS RVC0.M22, is favored by customers in Europe Today, we'd like to introduce a hydraulic screw-in cartridge direct-acting relief valve, equivalent to Italy VIS Hydraulics RVC0.M22. This is a same type of valve as the RVC0.S08 that we introduced last Monday, but just a bigger size and flow rate. Due to its compact size, stable performance, and competitive price, it is favored by many foreign customers, especially the customers in Europe. AAK hydraulic screw-in cartridge Direct-Acting Relief Valve 2 advantages: 1. The quality of this valve is benchmarking VIS Hydraulics, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-RVC0.M22 Hydraulic Screw-in Cartridge Direct-Acting Relief Valve: Operating Pressure: 350 bar (5000 psi) Max. Flow: 50 lpm (12.5 gpm) Internal Leakage: 0.25 cc/min (5 drops/min) max. to 80% of nominal setting Temperature: - 30°C ~ +110°C Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VH045 AAK E-RVC0.M22 hydraulic screw-in cartridge direct acting relief valve, benchmarking Italy VIS Hydraulics RVC0.M22, you are welcome to try it out. AAK HYDRAULIC VALVES (832) 2025-01-06
AAK Hydraulic Screw-in Cartridge Shuttle Valve equivalent to Italian VIS SHV0.G14, is favored by Russian customers Today, weâ??d like to introduce a hydraulic screw-in cartridge shuttle valve, equivalent to Italian VIS Hydraulics SHV0.G14. Shut-off valves for hydraulics systems, with two inlets and one outlet. Ball seat construction, automatic switching. The inlet with the higher pressure (port 1 or 3) is directly connected to tank (port 2), while the second inlet (port 3 or 1) is shut off. This valve is small in size, built-in, easy to install without taking up space, cleverly designed, with low precision requirements for the cavity. Similar structures in China have a fixed front end and high requirements for the cavity if the bottom is sealed. Due to these strong points, it is favored by our Russian customers. We ship this valve to Russia nearly every 3 months. AAK hydraulic Screw-in Cartridge Shuttle Valve 2 advantages: 1. The quality of this valve is benchmarking VIS Hydraulics, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SHV0.G14 Hydraulic Screw-in Cartridge Shuttle Valve: Max.Setting: 350 bar (5000 psi) Flow: 20 lpm (5 gpm) Internal Leakage: 0,25 cm3/min @ 350 bar Temperature: - 30°C ~ +110 °C Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VH018 AAK E-SHV0.G14 hydraulic screw-in cartridge shuttle valve, benchmarking Italian VIS Hydraulics SHV0.G14, you are welcome to try it out. AAK HYDRAULIC VALVES (829) 2024-12-19
For Hydraulic Piloted Directional Valve equivalent to HydraForce PD10-32, AAK received the re-peat order from our old customer in Turkey Last October, we shipped a hydraulic piloted directional valve equivalent to HydraForce PD10-32 to one of our old customers in Turkey. The PD10-32 is a screw-in, cartridge style, pilot operated, spool-type, normally closed, hydraulic directional valve. In Ningbo, there are only a few hydraulic cartridge valve manufacturers who have this model. AAK price is higher than the other hydraulic cartridge valve manufacturers in China. The competition is very fierce in the market in Turkey, but customer still placed the order with AAK, because as an old customer of us, he knows that AAK valve has stable performance and longer service life. It has been over 1 year since we shipped the trial order. Today, we received an email from the customer that he needs to place a mass production order for 500 pcs and wants to know the lead time. AAK hydraulic piloted directional valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-PD10-32 Hydraulic Screw-in Cartridge Piloted Directional Valve: Operating Pressure: 240 bar (3500 psi) Flow Rating: 40 lpm (10 gpm) Internal oil leakage: 82 ml/min. (5 in�³/min.) at 240 bar (3500 psi). Pilot Pressure Required: To full Spool Shift 4.7 bar for 4.1 bar spring; 8.6 bar for 7.6 bar spring Temperature: - 30�°C ~ +100 �°C (with standard Buna N seals) Fuilds: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VC10-3 AAK E-PD10-32 hydraulic screw-in cartridge piloted directional valve, benchmarking HydraForce PD10-32, you are welcome to try it out. AAK HYDRAULIC VALVES (828) 2024-12-18
The Hydraulic Screw-in Cartridge Check Valve equivalent to DANFOSS EATON CV11-12, AAK provides customers with more choices Today, weâ??d like to introduce a Hydraulic Screw-in Cartridge Check Valve equivalent to DANFOSS EATON CV11-12. This is a check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1. Compared with HydraForce similar model, it has higher working pressure at 350 bar (5000 psi). Some customers like to use this Danfoss Eaton check valve on hydraulic pumps. Except for this check valve equivalent to DANFOSS EATON, AAK has other similar check valves equivalent to VIS Hydraulics, SUN and HydraForce. All of them have been tested and gained recognition in overseas markets. AAK provides customers with more choices, at better prices. AAK hydraulic screw-in cartridge check valve 2 advantages: 1. The quality of this valve is benchmarking DANFOSS EATON, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-CV11-12 Hydraulic Screw-in Cartridge Check Valve: Operating Pressure: 350 bar (5000 psi) Flow Rating: 114 lpm (30 US gpm) Internal oil leakage ports 2 to 1: Max.0.5 Drops/min. at 350 bar (5000 psi). Temperature: - 40�°C ~ +120 �°C Fuilds: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: C-12-2U AAK E-CV11-12 hydraulic screw-in cartridge check valve, benchmarking Danfoss Eaton CV11-12, you are welcome to try it out. AAK HYDRAULIC VALVES (827) 2024-12-16
The Proportional Flow Control Cartridge Valve equivalent to Bucher SRCB has stable performance, and has been exported to Europe and America since 2022 Today, we d like to introduce a Hydraulic Proportional Flow Control Cartridge Valve equivalent to Bucher SRCB. In the SRCB series of proportionally operated flow control valves, the optimized design of the pressure compensator ensures constant speeds at the hydraulic actuator. The valves can be used as 2-way or 3-way units. As the 3-way version, they divide the inlet flow into a constant-flow / priority-flow portion and a surplus-flow portion. The surplus flow can be pressurized. The valve is mainly used in snow removal equipment, and is highly favored by Russian customers. One of our Russian customers purchases it regularly every month. They have also been shipped to customers in Turkey, Sweden, Canada and USA. AAK hydraulic proportional flow control cartridge valve 2 advantages: 1. The quality of this valve is benchmarking Bucher, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SRCB Hydraulic Proportional Flow Control Cartridge Calve: Operating Pressure: max. 315 bar Min.Pressure Difference (Pressure Compensator): 7 Fluid Temperature Range: - 20 ~ + 80 Inlet Flow: max.100 l/min. Leakage: max. 100 cm ³/min. at 100 bar Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: CSRCB3 AAK E-SRCB hydraulic proportional flow control cartridge valve, benchmarking Bucher SRCB, our European and US customers have been purchasing it since 2022. You are welcome to try it out. AAK HYDRAULIC VALVES
For Proportional Flow Control Cartridge Valve equivalent to HydraForce PV07-30, AAK has exported to several countries In 2022, a Brazilian customer placed the test order with AAK for a Proportional Flow Control Cartridge Valve equivalent to HydraForce PV70-30, which is a solenoid operated, pressure compensated, spool type, normally closed, priority type proportional flow control regulator. It also CAN be used as a restrictive type, 2-way, pressure compensated proportional flow regulator (with port 2 blocked). After 1 year of testing, this customer placed their regular order for 1,000 pcs, which proves that the function and performance of AAK hydraulic proportional priority flow control valve benchmarked the quality of HydraForce PV70-30. In recent 2 years, this valve has been exported to more customers in several countries, such as India, Sweden, Kazakhstan, Poland, USA ect. AAK Proportional Flow Control Cartridge Valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-PV70-30 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: Port 1: 240 bar (3500 psi); Port 2 and 3: 207 bar (3000 psi) Flow rating: 26.5 lpm (7.0 gpm) Regulated, range A, 2-ported 17.0 lpm (4.5 gpm) Regulated, range B, 2-ported 30.3 lpm (8.0 gpm) Regulated, range A, 3-ported 17.0 lpm (4.5 gpm) Regulated, range B, 3-ported 49.2 lpm (13.0 gpm) Maximum input, range A, 3-ported 26.5 lpm (7.0 gpm) Maximum input, range B, 3-ported Internal Leakage: 197 ml/min (12 in³/min) At port 3 with at port 1 (port 2 closed) 207 bar (3000 in�³/min) Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); Cavity: VC10-3 AAK E-PV70-30 Proportional Flow Control Cartridge Valve, benchmarking HydraForce PV70-30, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (822) 2024-11-11
For Solenoid Cartridge Valve equivalent to HydraForce SF08-22, a new Italian customer placed the trial order with AAK Last Friday, a new Italian customer had an online video conference with us, as well as visited our factory via the video. Actually, the customer tried to visit our factory in person. Due to the schedule conflicts, they had to visit us online. During the meeting, the customer placed the trial order for 3 hydraulic solenoid cartridge valves equivalent to HydraForce standard parts, one of them is SF08-22, which is a solenoid operated, poppet type, normally closed (energized: bidirectional flow) two way cartridge. It is intended for use in mineral based or synthetic (with lubricating properties) hydraulic fluids as a low leakage in higher pressure load-holding applications. In Ningbo China, there are only a few hydraulic cartridge valve manufacturers who have this model. Today, we delivered the test order samples for all 3 models. It may take 2 â?? 3 months for customers to test them at their applications. We are confident that there will be good news from customer at the end of this year or early next year. AAK hydraulic solenoid cartridge valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SF08-22 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 350 bar (5000 psi) Flow: 40 lpm (10 gpm) Internal Leakage: 3 drops/min max. at 350 bar (5000 psi) Operating Fluid Temperature: - 40�°C ~ 120�°C (with Standard Buna N seals) Cavity: VC08-2 AAK E-SF08-22 Hydraulic solenoid cartridge valve, benchmarking HydraForce SF08-22, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (821) 2024-11-04
For Hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV12-34, Russian Customer placed annual order with AAK again Early Last year, a Russian customer placed their trial order with AAK for a hydraulic solenoid cartridge valve equivalent to HydraForce SV12-34. It is a solenoid operated, two position, three way, direct acting spool valve. Last November, for the testing result was very good, the customer was very happy and placed their annual order with us for the year of 2024. 1 year has passed, they received positive feedback from market, the sales for this hydraulic solenoid cartridge valve are very stable and they are going to be out of stock in 2 months. Per customer, they will place their annual order with us for E-SV12-34 next week for the sales in 2025. AAK hydraulic solenoid cartridge valve E-SV12-34 two advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV12-34 hydraulic solenoid cartridge valve: Max.Pressure Rating: 240 bar (3500 psi) Flow Rating: 60 lpm (16 gpm) Max. Internal Leakage: 410 cc/minute (25 cu. in./minute) max. at 207 bar (3000 psi) Temperature: - 40 ~ + 120 (Std. Buna N Seals) Cavity: VC12-3 AAK E-SV12-34 hydraulic solenoid cartridge valve, benchmarking HydraForce SV12-34, has been approved by customer in Russia. its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (819) 2024-10-21
AAK Hydraulic Solenoid Cartridge Valve is equivalent to HydraForce SV08-20. Several US customers repeat the orders 2 3 times a year Recently, we received the repeat order from a customer in the United States for a hydraulic solenoid cartridge valve equivalent to Hydraforce SV08-20 again. It is a solenoid-operated, 2-way, normally closed, poppet-type, screw in hydraulic cartridge valve, with standard and manual override options. This valve is intended as a blocking or load holding device for low flow circuits having pull-only manual override requirements for handles or cable linkage. This is a standard part and commonly used. Till now, AAK hydraulic solenoid cartridge valve E-SV08-20 has been shipped to several customers in the United States. Its quality and stability has been approved by these customers. Some of them repeat the orders 2 â?? 3 times a year. The advantages of AAK Hydraulic Solenoid Cartridge Valve E-SV08-20 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve: Pressure Rating: 207 bar (3000 psi) Flow Rating: 23 lpm (6 gpm) Max.Internal Leakage: 0.15 ml/min (3 drops/min) max. at 207 bar (3000 psi) Temperature: - 40 â?? ~ + 120 â?? with Buna N seals Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VC08-2 AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve, benchmarking HydraForce SV08-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (818) 2024-10-14
Hydraulic Pilot Operated Relief Valve equivalent to HydraForce RV10-28 passed testing, AAK received mass production order from customer in Turkey 4 months ago in May, we shipped a 2 pcs of test order for a pilot operated relief valve equivalent to HydraForce RV10-28 to a new customer in Turkey. It is a screw-in, cartridge style, pilot operated, relief valve with reverse free flow check valve, intended for use as a pressure limiting device in demanding hydraulic circuits which require fast response, low hysteresis, low leakage, low pressure override and reverse free flow features. This customer tried another hydraulic cartridge valve manufacturer in Ningbo China 1 year ago, but failed due to quality, then they placed the 2 pcs of trial order with AAK this May in despite of AAK price is 15% higher. Last Friday, we were advised by customer that AAK samples passed testing and have been performing very well, and received their mass production order for 500 pcs. The advantages of AAK Hydraulic Pilot Operated Relief Valve E-RV10-28 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-RV10-28 Hydraulic Pilot Operated Relief Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 113 lpm (30 gpm) Max. Internal Leakage: 0.50 ml/min (10 drops/min) max. at to 80% of nominal setting Cavity: VC10-2 AAK E-RV10-28 Hydraulic Pilot Operated Relief Valve, benchmarking HydraForce RV10-28, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (816) 2024-09-30
After tested by customers in USA and Russia for 1 year, AAK Proportional Solenoid Valve has been approved to be equivalent to original HydraForce SP08-20 Last September, we launched a proportional solenoid valve equivalent to HydraForce standard part SP08-20. A solenoid-operated, 2 port, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. As mentioned in our article last year on 03/27/2023, AAK spent 6 months, 3 times material changes, 4 times testing to produce E-SP08-20 Solenoid Proportional Valve successfully. During the past year, we shipped test orders to customers in the United States and Russia. The Russian customer placed their regular order in August, and the American customer placed their regular order last week. The function and performance of AAK E-SP08-20 has been approved to be completely equivalent to original HydraForce SP08-20. AAK hydraulic proportional solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP08-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 207 bar (3000 psi) Flow: 22 lpm (6 gpm) Internal Leakage: 5 drops/min max. at 207 bar (3000 psi) Operating Fluid Temperature: - 40 to 120 �°C (with Standard Buna N seals) Cavity: VC08-2 AAK E-SP08-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP08-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (812) 2024-09-02
For Proportional Solenoid Valve equivalent to HydraForce SP10-20, AAK received re-peat orders from the 3rd customer within 18 months Last April, we launched a proportional solenoid valve equivalent to HydraForce standard part SP10-20. It is a solenoid-operated, 2-way, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. Proportional valves are the ceiling of hydraulic cartridge valve manufacturers. Among more than 100 hydraulic cartridge valve manufacturers in Zhejiang Province, China, there are no more than 5 manufacturers who can produce proportional valves, with a proportion of less than 5%. However, AAK not only has SP10-20, but we have developed more than 10 models of proportional valves. Since E-SP10-20 proportional solenoid valve was posted, we have received the re-peat orders from 3 customers till now. Within 18 months, total 3 foreign customers tested AAK samples and place the re-peat orders, which proves that the E-SP10-20 proportional solenoid valves shipped by AAK has very stable quality and good performance. AAK hydraulic cartridge solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP10-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 250 bar (3625 psi) Flow: 60 lpm (15 gpm) Internal Leakage: 5 drops/min max. at 250 bar (3625 psi) Operating Fluid Temperature: - 40 to 100 �°C (with Standard Buna N seals) Cavity: 10-2 AAK E-SP10-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP10-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (810) 2024-08-19
For Pilot-Operated Pressure Reducing/Relieving Valve equivalent to SUN PPDB, AAK received the re-peat order from customer in Europe again In July of 2022, we shipped a Pilot-Operated Pressure Reducing/Relieving Valve equivalent to SUN PPDB to a customer in Europe. In April of 2023, the customer placed their re-peat order for PPDB. In July of 2024, we received the re-peat order from this European customer again for PPDB. Actually, besides Europe, this model PPDB has been shipped to Brazil, Russia and the United States, which proves that AAK quality has been approved by foreign customers in different countries. The advantages of this pilot operated pressure reducing/relieving valve are: 1. The quality of this valve is benchmarking SUN Hydraulics, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-PPDB Hydraulic Pilot-operated, pressure reducing/relieving valve: Max. Operating Pressure: 350 bar (5000 psi) Capacity: 10 gpm (40L/min) Control Pilot Flow: 7 - 10 in�³/min. Cavity: T-11A AAK E-PPDB hydraulic Pilot-Operated, Pressure Reducing/Relieving Valve, benchmarking SUN Hydraulics PPDB, its service life is 2 times that of its domestic peers. You are welcome to give it a try.
For Hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV10-28, AAK has shipped to several foreign countries for several times So far this year, we received inquiries for a hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV10-28 from several customers in USA, Canada, Russia, Germany, Poland and India. It is a solenoid-operated, 2 way, normally closed, bi-directional, screw-in hydraulic cartridge valve, designed to function as a load holding or blocking valve in applications requiring low internal leakage bi-directionally. Till now, we have shipped this hydraulic solenoid cartridge valves to several foreign countries. Some of them have placed the reorders for several times. In Ningbo China, there are several hydraulic cartridge valve manufacturers who have this model. AAK has been proved to be the best choice with its excellent quality. The advantages of AAK Hydraulic Solenoid Cartridge Valve E-SV10-28 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV10-28 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 38 lpm (10 gpm) Max.Internal Leakage: 5 drops/min @ 207 bar (3000 psi) Cavity: VC10-2 AAK E-SV10-28 Hydraulic Solenoid Cartridge Valve 2 port, normally closed bidirectional blocking, benchmarking HydraForce SV10-28, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (807) 2024-07-29
For Hydraulic Pressure Reducing/Relieving Proportional Valve equivalent to HydraForce TS10-36, AAK received official order from an old customer in the USA Last June, one of our old customers in USA placed a test order for a hydraulic Pressure Reducing/Relieving Proportional Valve equivalent to HydraForce TS10-36. It is a screw-in, cartridge style, pilot-operated, spool-type, proportional pressure reducing/relieving valve which can be infinitely adjusted across a prescribed range using a variable electric input. The regulated pressure is proportional to the input electrical current. In Ningbo China, there are other hydraulic cartridge valve manufacturers who have this model, and AAK price is not the most competitive one, but because the valves that they purchased from AAK in the past have very stable quality, they do not want to take risk to try other hydraulic cartridge valve manufacturers, especially this is a proportional valve, which is not easy, so they still placed the trial order with AAK. Till now, it has been 1 year since the trial order was shipped. Last week, AAK received the official order of 200 pcs qty from the customer. The advantages of AAK Hydraulic Pressure Reducing/Relieving Proportional Valve E-TS10-36 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-TS10-36 Hydraulic Pressure Reducing/Relieving Proportional Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 56.8 lpm (15 gpm) Max.Control Current: 12 VDC coil - 1.10 A; 24 VDC coil - 0.55 A Relief Pressure Range (from zero to maximum control current): A: 6.9 - 207 bar (100 - 3000 psi) B: 6.9 - 159 bar (100 - 2300 psi) C: 6.9 - 117 bar (100 - 1700 psi) Cavity: VC10-3 AAK E-TS10-36 Hydraulic Pressure Reducing/Relieving Proportional Valve, benchmarking HydraForce TS10-36, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (805) 2024-07-15
For Hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV12-28, AAK received the test order from a new customer in the United States Last November, we received an inquiry from a new customer in the United States for a hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV12-28. It is a solenoid-operated, 2 way, normally closed, bi-directional, screw-in hydraulic cartridge valve, designed to function as a load holding or blocking valve in applications requiring low internal leakage bi-directionally. In Ningbo China, there are several hydraulic cartridge valve manufacturers who have this model. Per customer, AAK is not the most competitive one, but theyd like to try a test order because one of their partners mentioned AAK to them. AAK nearly do not attend any exhibitions. We focus on quality control and customized projects. The majority of our new customers are introduced by old customers. The advantages of AAK Hydraulic Solenoid Cartridge Valve E-SV12-28 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV12-28 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 76 lpm (20 gpm) Max.Internal Leakage: 7 drops/min Cavity: VC12-2 AAK E-SV12-28 Hydraulic Solenoid Cartridge Valve, benchmarking HydraForce SV12-28, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (804) 2024-07-08
For Hydraulic Piloted Directional Element equivalent to HydraForce EP08-35, AAK received order from a new customer in Europe Last September, we posted a new model E-EP08-35 hydraulic piloted directional element equivalent to HydraForce EP08-35. It is a screw-in, cartridge style, pilot to close hydraulic directional element. Since it was posted, we received inquiries from customers in Europe, Russia, USA and Canada in the past year. The customers in Europe and Russia placed the test orders. Last week, we received feedback from the European customer that AAK sample passed their internal testing for performance and durability. They will place the regular order for 300 pcs very soon. The advantages of AAK Hydraulic Piloted Directional Element E-EP08-35 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-EP08-35 Hydraulic Piloted Directional Element: Max. Operating Pressure: 345 bar (5000 psi) Capacity: 38 lpm (10 gpm) Maximum internal leakage: 164 ml/min (10 in�³/min) at 207 bar (3000 psi) Cavity: VC08-3 AAK E-EP08-35 Hydraulic Piloted Directional Element, benchmarking HydraForce EP08-35, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (803) 2024-07-01
For Hydraulic Fully Adjustable Needle Valve equivalent to SUN NFBC, AAK received inquiries from a new customer in Russia Last week, we received an inquiry from a new customer in Russia for SUN NFBC Fully Adjustable Needle Valve. This is a valve that we posted in March this year, under part number E-NFBC. It has passed our internal testing for performance and durability. The advantages of AAK Hydraulic Fully Adjustable Needle Valve E-NFBC are: 1. The quality of this valve is benchmarking SUN, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-NFBC Fully Adjustable Needle Valve: Max. Operating Pressure: 350 bar (5000 psi) Capacity: 20 lpm (5 gpm) Adjustment - No. of CCW Turns from Fully Closed to Fully Open: 5 Cavity: T-162A AAK E-NFBC Hydraulic Fully Adjustable Needle Valve, benchmarking SUN NFBC, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (802) 2024-06-24
