We are factory-direct racking manufacture Size , weight , dimensions Are all as you need
1> Suitable for long-shaped and bulky materials, profiles, pipe, timber and moulding 2> high space utilization 3> structure: H steel and traditional roll-formed style 4> height assembly and dismantal easily 7> use high quality of Q235 steel, and competitive price 8> surface treatment: powder coating or galvanized 9> application:Mechanical Manufacturing Industry and markets for building materials, etc 10>Payment terms: By TT or sight LC.
1> suitable for small variety but large quantity stored products, especially for standard goods; 2> high space utilization 3> FIFO/ FILO principle 4> first level pallets can be placed on the floor 5> forklifts operation alongside the aisle 6> assembly freely 7> each aisle consists of several level of pallet support rail. Pallets are placed on pallet support rail one after another; 8> surface treatment: powder coating or galvanized 9> application: warehouse, factory, logistic system, etc. 10> one of the most widely used storage rack 11> OEM order is avaliable
1. All the layers can be fix at any height only if it's times of 75mm, user will adjust different height for various pallet storage; 2. We supply quite big sections of upright to suit special needs; 3. Standard and special dimensions are both available, you just put forward your requirement and we design, we give the solutions; 4. Export powder coated and galvanized surface treatment to prevent against corruption; 5. Pitch is with 75mm. 1) wrapped by polysheet; 2) reinforced by straps
Distance : between each pillar : 4m to 6m. Height: first floor is about 3m, the second and third one is about 2.5 m. Structure: 1)The pillar is usually made up of square tubes or pipes. 2)The main and vice beam are made up of ¡°H¡± type steel. 3) Floor decking is made by cold rolling steel, checkered iron or steel grating. Load capacity: The floor load is in 1000kgsquare meters. Application: The upstairs and downstairs could be used for office, so this kind of floor combines storing and management closely. This is widely used in areas, such as third-party logistics, machinery manufacturing and so on. Operation process: Usually used to build a second floor or third floor assembly type floor in the existing warehouse, make the space change from a layer into two layers, which surely makes the best use of space. Goods are usually conveyed to2nd floor or 3rd floor by forklift hydraulic lifting platform or elevator, and then conveyed to a certain point by light car or hydraulic pallet car.
Features: DIY easy assembly: the simple structure, (Upright, Steel shelf, Gusset, bolt) can build a compelete unit. Height adjustable: the unique pre-punched hole on upright allows you adjust shelf height level easily. Capacity: Light duty shelving, 100kg to 250kg loading capacity per level. Structure: Sturdy, tough, adaptable, rigid when assembled. Versatile design: Easy to relocate and ideal for special purpose designs. Economical, Cheapper cost. . All-purpose slot angle steel upright . Cut-in composite usually with steel panel . Height of each layer can be adjusted freely by pitch of 50mm . Loading capacity: no more than 200kg per level . Simple and quick assembled and dismantled . Loading and unloading by hand . Powder coating finish and various color be available.
Cut-in composite step beam on which steel or wooden panels are assembled; the height of each layer is easily to be adjusted by 50mm, the capacity of each level is up to 800kg; the racking can be customized based on clients requirements, compared with the medium-duty shelving, it is more suitable for storing metal components and widely used in the manufacturing industry. 1. Upright: 50*58*1.5/2.0mm, 50mm pitch. 2. Step beam: 50*30*1.5p, 60*40*1.5p, 80*50*1.5p. 3. Steel shelf: 0.7 or 0.8mm, designed by loading capacity request. Plastic film as inner package.
Upright shaft is usually made of H type steel or cold rolling steel or frame, square tube, cold rolling steel or H type steel are used to make arms. Cantilevers are assembled to upright shafts by composite type or bolts & nuts which is also for the fixation between base and uprights. Level height is adjustable. Loading and unloading of goods can be done manually or by forklifts. The height of cantilever racking is usually lower than 2500mm (the height up to 6000mmby using forklifts for loading); length of arm is shorter than 1200mm, and loading capacity is no more than 1200kg per arm. Cantilever racking is mainly used in the Mechanical Manufacturing Industry and markets for building materials. There are three kinds of cantilever racking, light duty, medium duty and heavy duty, each kind of cantilever racking has different loading ability, as well as different material. plastic film as inner package
1. Steel platforms are mainly consisted by uprights, main beams, accessorial beams, steel floors, stairs and protection rails. Assembling in the whole structure, no need to welding in the sites. 2. The uprights are made of square tubes, round tubes and hot rolling H-type steel, the main and accessorial beams are made of hot rolling steel and cold-bending C-type steel, the material of floors are usually cold rolling steel, the structure is lock-up, between floors and main/accessorial beams, there are special designed locks. Compared with traditional checkered steel plates and steel gratings, the lock-up steel plates have many advantages, such as loading stronger, good integrity, good capacity equality, high accuracy, flat surface, lock easily, etc. also it is easy to assemble lighting system. 3. Forklift or lift platform deliver goods to the second or third floor, then trolleys or hydraulic platform carts deliver the goods to the pointed places. Compared to reinforced concrete, steel platforms have such features, building quicker, acceptable cost, easily assemble and disassemble, and can be moved to use, also, the appearance is more beautiful. The distance between two uprights is 4~6 meters, the height of the first floor is around 3 meters, for the second and third floor, the height is around 2.5 meters. The loading capacity of the floors is usually 300~1000kg per square meters. 4. This kind of steel platforms can make storage and management combine closely, upstairs or downstairs can be used as warehouse office. This kind of storage system are usually used to the third logistics, machinery manufacturing and other industries. Plastic film as inner package.
1. If the area of factory is limited, by using steel beams and metal plates, partition the space to be several levels, usually 2~3 levels. 2. The floors are usually made of cold rolling steel, the structure is lock-up, between floors and main/accessorial beams, there are special designed locks. Compared with traditional checkered steel plates and steel gratings, the lock-up steel plates have many advantages, such as loading stronger, good integrity, good capacity equality, high accuracy, flat surface, lock easily, etc. also it is easy to assemble lighting system, store and manage goods. The plates of floor have common flat type, figure type, checkered type, and so on. The loading capacity of the floors is usually 300~1000kg per square meters. The distance between two floors is 2.2~3 meters, the height of the top level racks is around 2 meters, considering fully about the use convenience of people and machines. 3. Mezzanine racks are usually designed with stairs, hydraulic lift platforms or elevators, or by using forklifts to load or unload the goods in the up floors via doors. According to customer¡¯s request, the mezzanine racks can be designed a unload slide board, in order to unload goods quickly from up floors to the ground. 4. Easily assembling and disassembling, according to sites and requirements, the mezzanine racks can be designed to be 2 or 3 floors, in order to use space fully, this kind of racks are commonly used in autos, electronics, light industry, machinery industry, etc. Loft-type racking.
Complies with Australian standards. Road racking is one of the Chinese leading storage equipment manufacturers of innovative storage equipments. We produce high-quality Dexion compatible pallet racking which have been widely accepted and used in the world. Dexion compatible pallet racking system provides efficient use of storage space for palletized loads. With a wide range of options and components available, the Road racking system can be tailor made to meet you precise needs.
Push-back racking is a rack system that combines standard selective pallet racking with a cart and rail system that sets on horizontal load beams. As in standard selective racking, you typically have two pallets side by side on a beam level but the advantage is you can have 2,3,4,5 pallet positions deep.
Carton live storage / Carton flow rack is the optimal solution for compact storage and efficient order-picking. Carton live storage rack system consists of conventional shelving and rows of wheels. The height levels can be adjusted in small increments and the angle of inclination varied. The rails for the wheels are hung in and can be easily moved sideways. ?ípFirst-in First-out?í+ is guaranteed.
Pallet live storage / gravity flow rack is carried out on one side and retrieval on the other side of racking. As soon as a pallet is retrieved, the other pallets move up automatically to the retrieval position on inclined roller conveyors. Brake rollers keep gravity under control and an automatic separating device ensures that the pallet at the front is never under impact pressure from the following pallet. Automatically operated roller conveyors within a channel are available as an option.
Pallet rack system is a steel structure in which inventory is stacked in multiple levels. Pallet racks are typically built for optimum density of storage and designed for easy access to inventory, reconfigurable use, and simple assembly. Pallet racking: 1) standard sizes to fit most racks 2) fully utilizes vertical space 3) suitable for storing pallets 4) the bearing capacity per shelf of such rack may reach 4, 500kg 5) durable finish, clean appearance, fireproof 6) versatile system with unsurpassed adaptability for industries 7) pallets are supported between load-supported beams, easy to assemble and manage.
Drive in pallet rack is a highly specialized type of pallet rack meant for high density storage. The application for drive in pallet racks is multiple pallets of the same item (sku) where pallet selectivity or time sensitivity is not an issue. Drive in pallet rack is named such because the lift truck actually enters, or drives into, the rack structure. The rack structure is specifically design to accept your lift trucks as well your product to be stored. 1) very high utility ratio of the warehouse, maximum use of available space. 2) goods can "first in - first out" or "first in - last out" 3) structural steel construction for durability 4) pallet positions configure from 2 to 5 deep and 2 to 5 high deal for roofing 5) finish: powder coating.
Cantilever racking-multi-arms racks (fully bolted structural i-beam) The cantilever racking has specific advantages for the storage of the strip type cargoes, such as tubing and plate, etc. According to the carrying capacity, it can be divided into single side cantilever rack and double side cantilever rack according to the structure. Multi-arms rack features: 1) composite structure 2) size and capacity can be fixed by users, allows extra long items to be stored. 3) mainly used for the storage of long, circular or irregular shape goods 4) high quality steel, plastic sprayed in the surface and color optional
Pallet racking (heavy duty racking, storage racking): 1. Strength and rigidity prevents compression damage to goods; pallets can be Located, accessed and moved individually 2. Pallet racking suits almost all types of palletized goods 3. Easy relocation or addition of load supporting beams to accommodate new load sizes and / or additional levels 4. Rapid through put and handling 5. Compatible with most types of handling equipment and building structures 6. Available as individual components or as complete system 7. Lowest level pallets can be placed on the floor 8. Made of high grade steel Pallet racking (heavy duty racking, storage racking): wrap membrance and paper carton
Mezzanine racking systems(multi-layer racking, steel mezzanine platform) including stairways, handrails and safety gates, all of which combine to provide a safe, secure and attractive mezzanine floor. Features of mezzanine (multi-layer racking, steel mezzanine platform) : 1). With composite racking structure, 2). Two kinds floor panel for choosing 3). Can be designed into one layer or multi-layers according to actual situation 4). Ensures fullest space utilization 5). Surface: powder coated or galvanized and color optional 6). Parts including: stairways, handrails and safety gates, floor panel and standard accessories; 8). Can be designed according to clients' requirements Packing of mezzanine racking(multi-layer racking, steel mezzanine platform): wrap membrance and paper carton
Drive in racking(heavy duty racking, storage racking/rack): A).Suitable for great quantity of cargo with few varieties; B).Forklift can directly more in cargo passage. Warehouse utilization rate is high. C).High density storage allowing a greater number of pallets to be stored per cubic meter than other storage systems D).Low stock rotation suitable for seasonal goods and fluctuating stock demand. E) ideal for cold and chill storage and bulk storage applications F).Drive in racking (storage rack, heavy duty racking)'s parts: beams, upright frame, spacer, horizontal and diagonal bracing, safety pins, wire footing plates, etc. G). Material:high quality steel H).F inished:plastic spraying I). Remark:non-standard specfication available request. Packing for drive in racking (storage rack, heavy duty rack): wrap membrance and paper carton
