Find Verified Metal Working Machinery Suppliers, Manufacturers and Wholesalers

Product Features:
1.Laser cutting is high power density ,better controlled no-contact processing.
2.Narrow kerf,small workpiece distortion.
3.High speed:100 times faster than linear cutting
4.Small heat affected zone,good dimension stability.Flat and handsome laser-slotted without later process
5.Steady performance:as a mature laser apparatus, suitable for Mass Serial Production.

Specifications
Model :RL-LCY500-2513
Processing scale :2500*1300mm
Cutting thickness :0.2-6mm
Max output power :800W
Laser wavelength :1064nm
Pulse frequency :1-300HZ
Min.linewidth :0.15mm
Electrical source :380V/50HZ/100A
Cooling system :7p water cooling
Max cutting speed :35mm/s
Weight :3600kg.



Wooden Case.

Metal frame, is a steel and wood, construction materials earthquake fire. Metal frame of high quality cold-rolled galvanized steel coil as raw material, rolling through a kind of decorative material, which material uniformity, high strength, steel degree of good corrosion resistance. Done in conjunction with gypsum board walls, suspended ceiling with the best materials.

Name: HF50
Main and metal frame production line program
1. Rolling sheet metal thickness: = 1.2 mm.

Second, the production line is mainly composed by:
1. Uncoiled - 2 sets
2. Forming the host - 2 sets
3. Hydraulic cutting system - 2 sets
4.4 sets of care rack
5.2 sets of control systems.

Third, the production line is mainly composed of structural description:
1. Uncoiler: Single-support machine, manual open-book, screw concentric swelling structure.
1) maximum load: 3t.
2) the mandrel base diameter: set by the user.

2. Incision and cut off the hydraulic system: This machine is driven shear cylinder mold to achieve the effect of incision and cut off. All hydraulic components are produced by famous manufacturers.
1) die cut material: gcr12.
2) hardness: hrc58 ~ 60.
3) hydraulic motor power: 3kw.

3. Forming host
1) forming speed: 6 ~ 8 m / min.

2) Forming pass: main keel 16 times. Vice keel 12.

3) frame: adopt the national standard I-beam welded together.
A) name: hot-rolled I-beam.
B) specification: 28 #.
C) standard: gb/t706-1988.

4) spindle:
A) material: high quality 45 # steel.
B) shaft diameter: |46mm.
C) heat treatment: hb235 ~ 280.
D) processing technology: rough heat treatment finishing.

5) Forming roll:
A) material: gr15 (bearing steel).
B) hardness: hrc 60 ~ 62.
C) processing technology: rough heat treatment finishing.

smt,smt mounter, lead-free reflow soldering,lead-free reflow oven,reflow soldering, wave soldering,smt equipment,stencil printer,AOI,BGA repair stations,wave soldering machines, LED glue machine reflow ovens, solder reflow, pcb soldering, lead free soldering, lead free solders, pb free soldering, reflow furnace, smt mounter,smt chip mounter,smt shooter,wave soldering machines, reflow, LED equipment, LED machine, BGA rework stations solder paste,fluxes,Bar Solder, smt semi-automatic printer,solder paste,smt turnkey solutions,smt pick-place machine,
Mindray Electronic equipment Co.,LTD. was founded in July,1999. Now, we have more than 260 employees , more 80 Skillful employees are bachelor degree or above , over 8000M2 manufactory area , all sorts of processing equipment surpass 60 sets, and have a strong ability in research and development and manufacture in SMT.

Side Push-out Series
Model Nominal force(kn) Press Box size
(L¡ÁW¡ÁH) (mm) Bale size
(W¡ÁH) (mm) Bale weight (kg) Production
(t/h) Power
(kw)
Y81T-63 630 1000¡Á600¡Á500 200¡Á200 28~35 0.9~1.1 7.5
Y81T-100 1000 1000¡Á700¡Á550 230¡Á230 42~53 1.2~1.5 11
Y81T-125A 1250 1200¡Á700¡Á600 300¡Á300 65-80 1.2~1.8 15
Y81T-125B 1250 1200¡Á700¡Á600 250¡Á250 50-62 1.2~1.5 15
Y81T-160 1600 1400¡Á900¡Á700 320¡Á320 70-85 1.5~2.2 22
Y81T-160A 1600 1600¡Á1000¡Á800 400¡Á400 110-150 2.0~3.5 22
Y81T-160B 1600 1600¡Á1200¡Á800 400¡Á400 130-180 2.0~4.0 15¡Á2
Y81T-200A 2000 1600¡Á1200¡Á800 450¡Á450 140-190 2.5~4.5 37
Y81T-200B 2000 1800¡Á1400¡Á900 450¡Á450 210-300 3.0~5.0 22¡Á2
Y81T-250A 2500 2000¡Á1400¡Á1000 500¡Á500 230-270 4.0~6.3 22¡Á2
Y81T-250B 2500 2000¡Á1750¡Á1000 500¡Á500 250-280 5.0~6.3 22¡Á2
Y81T-315A 3150 2000¡Á1400¡Á1000 500¡Á500 250-360 4.0~6.5 37¡Á2
Y81T-315B 3150 2000¡Á1750¡Á1000 500¡Á500 260-370 5.0~7.0 37¡Á2
Y81T-400 4000 3000¡Á2000¡Á1200 500¡Á600 250-380 6.0~8.0 45¡Á2
Y81T-500R 5000 2500¡Á1300¡Á800 500¡Á500 300-500 6.0~10.0 22+37.


Container.

Parameter Unit : Q3512 Q3518 Q3525B
The diameter of revolving table mm : §¶1200 §¶1800 §¶2500
The maximum weight kg : 500 800 100
Cleaning workpieces size mm : 3-5 800 150
QR3210 : 1.5-2.5 600 30.

The series of Q69 steel sheet shot blasting pre-treament line are mainly consist of warm-up, shot blasting and spray painting and drying process. It applies to shipping, car, motorcycle, bridge, machine etc. which is in the line of steel board, section and structure casting to wipe of surface rusting and painting art.


Parameter Unit Q698 Q6912 Q6915 Q6920
The effective cleaning width mm 800 1200 1500 2000
The room feed-in size mm 1000 x400 1400 x400 1700 x400 2200 x400
The length of cleaning work piece mm 1200-12000 1200-1600 1200-12000 1200-12000
The speed of wheel conveyer(stepless speed variation) m/min 0.5-4 0.5-4 0.5-4 0.5-4
The thickness of cleaning steel sheet mm 3-60 3-60 1.5-60 3-60
The section steel specification mm 800 x300 1000 x300 1500 x300 2000 x300
The quantity of shot blasting kg/min 4 x180 4 x250 4 x250 6 x250
The first enclosed quantity kg 4000 4000 4000 4500
Roll brush adjusting height mm 200 200 350 450
Airiness capacity 22000 17560 19000 19550
Exterior size mm 25017x4500 x9015 12180 x4250 x7095 15200 x5370 x6797 30650 x6850 x9095
Totalpower
except for dust cleaning kw 90 78.3 113.5 156.6./

45 deg single head CNC cut to length line.

Parameter : GD-PM 50
Laser output power : 50-100W
Laser wavelength : 1064nm
Beam quality : TEM00 (M2: <1.5)
Pulse width : 5-25ns
Q frequency : 10-80KHz
Marking range : 100X100mm
Optional area : 150*150mm
Min. line width : 0.01mm
Repetitive accuracy : ¡À0.001mm
Marking speed : 1000-3000mm/s
Consumed power : 800W
Electricity requirements : 220V 50Hz/60Hz
System Dimension : 700*600*1300mm
Cooling system : Air cooling.


Wood packing.

Fiber Laser Marker

Principle
Fiber laser adopts a fully integrated design and merges all the components into a single fiunctional element. It has no optical power coupling loss and pollution, air cooling. It possesses merits of high efficiency, long lifetime and low maintenance.

Features
Excellent beam quality
The beam quality of GD-FM Series Fiber laser marking machine is better than that of the conventional solid-state laser marking machine. It is output from the base model (TEMOO) and the focused spot size is 10um. And its divergence angle is 1 / 4 of the semiconductor pump. So it is especially suitable for precision and fine marking.

Low utility cost
The maximum photoelectric efficiency is up to 30%. The input power of this equipment is less than 500W which equals to 1/10 of lamp pump YAG laser marker and saves lots of energy consumption expense

Zero maintenance
Lightstar Fiber Laser Marker is maintenance free and unnecessary to adjust or clean lens.

Long lifetime
Fiber Laser Marker adopts laser diodes as pump source, its average working time can reach 100,000 hours.

High processing speed
The processing speed is 2-3 times faster than traditional laser marker.

Applications
Electrical appliances, electronic communications, auto parts, precision metal, jewelry gifts, glasses watches, instrumentsation, and bathroom ware etc

Fiber laser marker specification
Technical parameter
Average output laser power : 5,10 ,20 or 30W (continuous or Pulse)
Laser wavelength : 1064nm
Power adjusting range : 10-100%
Repetitive frequency : 20-100KHz
Beam quality£¨M2£© : 1.4-1.8
Optical-electronic efficiency : 30%
Marking range : 100X100 mm
Marking depth : 0.01-0.2mm
Min focus spot size : 0.01mm
Min. character height : 0.2mm
Repetitive accuracy : ¡À0.001mm
Max. liner marking speed : ¡Ü7000mm/s
Marking format : Figure, word, bar code, 2D, Date, shift, batch no, seri
code, date, order of runs, lot number,
serial number, file chaining
Operating system : Support PLT¡¢DXF¡¢BMP ,SHX, TF library
using SHX¡¢TTF character storage
directly
Dimensions (L*W*H mm) : 550¡Á900¡Á1200
Power requirement : 220V£¬50Hz/60Hz.

Wood packing.

Fast curvilinear cutting function: any curves can be cut with a fast and continuous speed, the motion process of laser heads just like a top level speed racers racing aside a beautiful arc. Fully support CAD, CORELDRAlMGERBER and TAJIMA design software, friendly man-machine interface, close to the industries demands.

Laser Type : domestic seal CO2 laser tube
laser power: 80W
Cooling Method, water-cooled
1200mm*800mm cutting areas: 1000mm*800mm
graving speed: 0-64000£¨mm/min£©
cutting speed: 0-36000£¨mm/min£©
machine size: length 1800mm, width 1260mm, height 1150mm
Gross weight: 230kg net weight: 200kg
max power supply: 220v/50-60HZ,10A
Minimum forming words: 2 x 2mm for Chinese characters, 1 x 1mm for letters
resolution ratio: less than 4000 dpi
positioning accuracy: less than 0.05m
Hang line number: 90 lines
total power: less than 1250W
operating temperature: 0~45¡æ
Operating humidity: 5~95%(free of condensed water)
Graphic file format : BMP,JPGE,PLT,CDR,DWG,DXF,DST

1400mm*1000mm*1200mm.

Parameter Unit Q326 Q3210 QR3210
Productivity T/h 0.6-1.2 3-5 1.5-2.5
Loading weight kg 200 800 600
The maximum weight of one piece kg 10 150 30
Diameter of roller mm ¦650 ¦1000 ¦1000
Available capacity m©ø 0.15 0.4 0.3
Pill impelling volume kg/min 100 250 250
Dedusting air volume m©ø/h 2200 6000 5000
Power dissipation kw 12.6 32.6 24.3
Appearance dimension mm 3681x1650x5800 3644x2926x5856 3972x2600x4768
Machine total weight kg 2340 7400 5843.

Fast curvilinear cutting function: any curves can be cut with a fast and continuous speed, the motion process of laser heads just like a top level speed racers racing aside a beautiful arc.
Support many design software like cad, coreldralmgerber, etc, friendly human-computer interface, close to the industries demands.
Support many design software like cad, coreldralmgerber, etc, friendly human-computer interface, close to the industries demands.
Multi-document functions: TY series equipment can store up to several g size of working documents, under the situation of completely off the computer, users can use the engraving machine easily choose files to realize different products batch production.
Full optical coupling isolation system combined with high speed differential input/output circuit design, output and download to u-disk directly, strong anti-jamming capability.

Technical parameter:
Laser power: 70-80w
Minimum forming words: Chinese characters 2 x 2mm, letters 1 x 1mm,
Carving speed : 0-64000¨mm/min©
Cutting speed: 0-36000¨mm/min©
Resolution ratio: less than 4000 dpi
Power supply: ac220v¡à10%
Positioning accuracy: less than 0.01m
Hang line number: 60 lines
Total power: less than 1250w
Operating temperature: 0~45¡æ
Operating humidity: 5~95%(free of condensed water)
Graphic file format: bmp, jpge, plt, cdr, dwg, dxf, dst.

90cm*60cm*120cm.

Features of pneumatic forging hammer:
+ ready operation: economic and convenient

+ easy to operate, by manipulating the hand lever or foot-pedal, all operating functions idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired

+ a special oil-pump is provided for lubricating the cylinders. Prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand.




9kg, 15kg, 25kg to 2000kg.

Magnetic Polishing Machines

1. Structure:

TONZZE magnetic polishing machine is composed by chassis, electrical box, control panel, magnetic device and motor.

Chassis: It is the frame of the machine and is welded by high quality stainless steel plates, and baking finished.

Electrical box: It is in the chassis, all of the components are CE certificated.

Control panel: It is in the top of the chassis, and press the buttons to control the machine.

Magnetic device: It is in the chassis, and is the main force generator to drive the grinding pins to work with the workpieces.

Motor: It is in the chassis and it provides motive power to run the machine.



2. Function

TONZZE magnetic polishing machine removes the rusted layer or burnt spots of the parts, deburr and finish the parts in a very short time. The machine is especially best workable for the parts with inner holes, complex shapes, crevices or screw threads. Magnetic polishing machine will not hurt the surface of the parts, and not change the accuracy of the parts after finishing. The machine works efficiently and only about 5~15 minutes is needed for the parts. Tonzze magnetic polishing machines can finish parts of metal materials and hard plastics.



3. Working Principle

TONZZE magnetic grinding machines use the magical force of magnetic field to make the stainless steel pins rotate very fast, and the pins de-burr, polish and clean the work pieces high-effectively and precisely. This machine does not make any harm to the environment when it is working.



4. Packing Details

Magnetic Polishing machine is packed with the following items in a firmly plywood case.

Special treated stainless steel grinding pins (8kg for TT-860; 6kg for TT-848; 4kg for TT-845; 2kg for TT-835.)

Concentrated finishing fluid (liquid) 25 kg

Grinding basins 2 pieces

Basin Cover 1 piece

Sieving baskets 2 pieces.



Packing Details:
Magnetic Polishing machine is packed with the following items in a firmly plywood case.
Special treated stainless steel grinding pins (8kg for TT-860; 6kg for TT-848; 4kg for TT-845; 2kg for TT-835.).

Technical Parameter:
Wire diameter range:0.16~0.55 mm (magnetic hysteresis method)
0.30~0.85 mm( electric control method)
Armature diameter: 20~60 mm
Stack length: 10~70 mm
Shaft diameter: 3~15 mm
Shaft length: less than 250mm
Armature Slot: even slot
Turn number: 0~9999
Commutator diameter: 8~40 mm
Winding speed: 0~2500 rpm
Winding motor power: 1.5KWX2
Angle detecting speed: 0~3000 rpm
Angle detecting motor power: 0.75KWX1
Air supply pressure: 4~6 Kg/cm2
The machine total power:4.0 KW
Voltage:three phase AC 380V 50/60 Hz
Weight:600Kg
Dimension:2000(length)X1300(width)X1800(height)m.

wooden case according to the dimension of machine.

FUNCTION AND CHARACTERISTIC:
1.manually fitting mould, and straining and releasing the mould with hand control lever.
2.automatically winding
3.quickly replace the tooling gripper;
4.travel, tilt angle can be adjusted;
5.it is easy to set parameters, .alarm available.

MAIN TECHNICAL PARAMETERS
1.Wire range: 0.15¡ª1.3mm
2.Stack length: 20¡ª60mm
3.Pole: 2
4.Turns range: 0¡ª99999
5.Stator O.D: 50¡ª150mm
6.Main spindle speed: 0¡ª450RPM
7.Air pressure: 5-7kg/cm2
8.Voltage:415v/3, 50/60HZ
9.Motor power: 4.5KW
10.Weight: 1.2T
11.Dimension: 1050*2300*1750mm.

MAIN ELECTRICAL CONFIGURATION
1.Mitsubishi PLC
2.EV4300C GOT
3.Mitsubishi frequency converter
4.Airtec cylinder and air source part
5.Mitsubishi tension control unit or Wanner (at your option).

wooden case according to the dimension of machine.

3d dynamic focus larage-scale laser marking machine for different height

Application field

Suitable for all kinds of metal materials (including rare metal), electroplating materials, coating materials, spraying materials, plastics, rubber, resin, ceramic and so on.

Technical parameter

Laser generator Different types of solid laser generator
Laser power Selectable from 50w to 200w
3d dynamic marking area 100mm¡á100mm¡ª500mm¡á500mm
Origin of galvo Germany
Height different 0-350mm
Focus distance measuring system Laser focus distance measuring system
Marking responding time every 5mm height different ¡ü1.5s
Positioning marking precision 0.01mm

We goldenlaser can supply you laser engravers with high quality and resonable prices
Our machines is widely used in manufacturing, such as textile industry , tag trade.
We can not only offer you the equipments but also can bring you the best after-sale services.
We can design and produce machines by ourselves so that there is always a laser system which can satisfy your needs.



Working area 100mm×100mm—500mm×500mm.

Place of origin beijing, china (mainland)
Brand name: cryogenic
Model number: dc-380
Type : industry freezer
Working temperature: +200¡ãc to -196¡ãc
Medium: gas liquid nitrogen
Inside demension: 900*650*650mm
Load capacity: 750kg

Dc-380 is designed for treating the metal parts after quenching, creating an environment of ultra low temperature, making the metal parts get better mechanical performance:

Improve the hardness 1 to 2 degree
The wear resistance will be enhanced
Improve the service life about 4 times.



Wooden box.

Used for the bending of aluminum composite panel(ACP) and aluminum sheets and metal sheets. The up and down parts of this three roller bending machine utilizes a machine construction. The transportation parts adopt power-driven. The top roller can be moved up and down by the motor to discharge the workpiece. According to the customer's requirement, the machine can be supplied with specific rollers to work angle iron and steel pipe.

Main Technique Parameter
1.Maximum thickness.........................4mm(iron)/6mm(aluminum)
2.Maximum width.............................3000mm
3.Yield limit...............................240MPa
4.Minimum diameter full capacity............380mm
5.Top roller diameter.......................180mm
6.Bottom roller diameter....................150mm
7.Motor.....................................5KW
8.Weight....................................1500KG
9.Overall dimension.........................4000*860*950mm.

wood box

Our ring rolling machines are the most excellent equipments for processing seamless ring forging such as: bearing ring, gear ring, rim, turning support, flange and high temperature alloy for aviation.

They are most extensively used in bearings and gears manufacturing, and also used in precise flange rings manufaturering for chemical engineering piping. They have the advantages of good dimensional precision, good circularity and economy of material. Bearing collars of different kinds, both internal and external are reamed to shape. The rollway and retaining edges on the collars are also reamed into shape at the same time.

The rolling machine can roll rings automatically. Only to set the dimensions of ring, semifinished ring, roll and material specification, then it can roll the ring and stop automatically. So it's very effective to promote your condition with high efficiency.

Rollers are necessary and very suitable to manufacture seamless ring forgings, bearing rings, bearing sleeve rings, groove support wheel forgings, gear rings, rim, turning support, flange forgings and high temperature alloy rings for aviation. And our ring rolling machines are widely used by industrial manufaturers all over the world, where they meet with customer's acclaim.

You will rest assured of its economic benefits and upgrading of your forging pressing technology once you have it. So I know the ring rolling machines will promote your business greatly. If you like, please visit our website and feel free to contact me. I'll write you back soon to what you're concerning with our best quotation. We are always glad to serve you.