Si:98.5%(min); fe:0.5%(max);al;0.5%(max);ca:0.3%(max) In plastic woven bags of 1mt net each
Si:99%(min); fe:0.3%(max);al;0.3%(max);ca:0.03%(max) In plastic woven bags of 1mt net each
We are the largest manufacturer of silicon metal in China. Producing capacity is more than 100000 tons each year. With the most advanced equipment imported from usa, we can supply you with large quantity and steady quality. Ton bag/mt
Materials:stainless steel expanded, iron plate. The meshes for the high-grade sound box.
Density>9.8g/cm3(molybdenum alloy one:density>9.3g/cm3) Used for seamless tubes of stainless, alloy steel and high-temperature alloy. Your special requests available. Type diameter tolerance length tolerance of length semifinished Dm20 20 Dm25 Dm30 30 +3 60-80 +6 type a Dm35 35 0 0
Molecular formula v2o5 molecular weight 181.88 Purity:>99% impurity content (ppm) Si fe p s as k+na 0.01 0.01 0.001 0.002 0.005 0.03 Packing: powder 25kg composited bag lined with plastic bag ( paper bucket )or according to userf+s requirements.
Expanded metal Swm:2.5mm-50mm Lwm:4.5mm-100mm Strand thickmess:0.5mm-8.0mm Strand width:0.5mm - 12.0mm Wooden plate, then plastic bag for each plate
Spaying powder 150 300mesh, 300 mesh
Magnesium ingot Purity: MG: 99.9%min H.S. Code: 81041100 Specs.:100g, 200g, 300g, 400g, 500g, 1kg, 2kg, 4kg, 7.5kg,15kg, 100kg Packing: 20MT/FCL 1 MT on a wooden pallet
Calcium silicon Silicon barium Calcium silicon barium Calcium silicon aluminum Ferro silicon aluminum Calcium silicon aluminum barium These products are compound deoxidizer and desulfurizer, which can better meet the deoxidation and desulfurization operations of molten steel. It has low melting point, good deoxidation effect, promotes desulfurization, removes impurities, purifies molten steel, and improves steel properties.
Custom MIM PM pats by drawings for Automobile metal parts, airbag components,Ignition control lock component,Turbocharged rotor All the profucts can process by customization. Please send me the 2D and 3D drawings with size and tolerance. We will evaluate the drawings for you and process according to the drawings. And we will keep the drawings strictly confidential. Customers can also choose processing methods With over 20 years experience, ShenZhen YuJiaXin Hardware Products Co., Ltd. is a leading manufacturer of precision metal parts in China, we provide products to consumer electronics, automotive, medical, and industrial. Metal Injection Molding,or MIM,is a new Powder Metallurgy process that can produce sintered componects with high densety and complicated shapes without the need for machining. With its unique characteristics, MIM is capable of producing precise metal parts for a wide range of products, including automobiles, cellular phones,hand tools,dental instruments,pneumatic tools, power hand tools, surgical instruments,sporting goods, and laptop computers. The common materials used in MIM range from stainless steels and alloy steels to soft magnetic matericals. Metal injection molding (MIM) is an effective way to produce complex and precision-shaped parts from a variety of materials. This process produces parts for 50% less than the cost of CNC machining or casting. MIM is able to produce parts with complex shapes, superior strength and excellent surface finish with high volume manufacturing.High volumes are attained through multi-cavity tooling. From design and tooling to production and quality engineering with in-depth technical and engineering expertise. Our business model is designed to meet the portfolio of parts that global OEMs will source in China. Our facility is growing rapidly, and adding new capabilities in a very short span of time. Please contact us to understand our current state of completion and new capabilities that we plan to add.
KSGER Soldering Iron Station Stand For DIY T12 Holder Welding Iron Tips STC STM32 Metal Handle Aluminum Alloy Tools Repair Phone Features : Full high temperature iron frame, superior quality, durable and steady. Solid metal chassis plate
Sintered metal filters are a type of porous filter made by sintering metal powder particles together. Sintering is a process that involves heating metal powder to a temperature just below its melting point, allowing the particles to fuse together and form a solid structure. The resulting filter material is highly porous with a controlled pore size distribution that can filter out particles of a specific size. The pore size of sintered metal filters can range from a few microns to several hundred microns, depending on the required filtration level. The pore size is controlled during the manufacturing process to ensure consistent and precise filtration. Sintered metal filters provide high filtration efficiency due to their precise pore size distribution. They can filter out particles and contaminants of a specific size, making them suitable for a wide range of applications where filtration accuracy is critical. Additionally, sintered metal filters are easy to clean and can be reused multiple times, making them a cost-effective solution in many applications. Products Features Highly porous structure: Sintered metal filters have a highly porous structure that allows for efficient filtration of liquids and gases. The porosity is controlled during the manufacturing process to ensure consistent and precise filtration. Precise pore size distribution: Sintered metal filters offer a precise pore size distribution, which allows for accurate filtration of particles and contaminants of a specific size. This makes them suitable for a wide range of applications where filtration accuracy is critical. High strength and durability: Sintered metal filters are made from metal powders that are sintered at high temperatures, resulting in a strong and durable filter material. They can withstand high temperatures, corrosive environments, and high-pressure applications. Chemical resistance: Sintered metal filters are available in various metals, each with different chemical properties. This allows for customization of the filter material to suit specific chemical environments and applications. Easy to clean and maintain: Sintered metal filters can be easily cleaned and reused multiple times, making them a cost-effective filtration solution. They can be cleaned by backwashing, ultrasonic cleaning, or chemical cleaning, depending on the application requirements. Products Applications Sintered metal filters are used in a wide range of industries and applications, including oil and gas, chemical processing, pharmaceuticals, food and beverage, and water treatment. They are often used to filter out impurities, contaminants, and solids from liquids and gases. The filters can be made from various metals, including stainless steel, bronze, nickel, and titanium, depending on the specific application requirements.
Product Introduction The stainless steel filter is a type of metal porous filter element made from industrial metal powder, typically 304 or 316L. The raw material is formed through cold isostatic pressing and sintered under high temperature and vacuum conditions. The resulting filter element contains countless micropores that are curved, crisscrossed, and highly precise, allowing for deep-level precision filtration through pressurization. The stainless steel filter is a highly advanced type of metal porous filter element that is widely used across many industries, including petrochemical, coal chemical, pharmaceutical, water treatment, food, metallurgical, and gas purification industries. Product parameters Outer diameter: 20~100mm Length: 100 1500mm (more than 1500mm can be welded) Filtration accuracy: 0.5um 50um Porosity: 35-45% Features Here are four key features of the stainless steel filter: 1. Precise and uniform porosity 2. Excellent mechanical properties 3. High-temperature resistance 4. Easy to regenerate Application With its unique porous technology, stainless steel filters are widely used across a range of industries, including the petrochemical, coal chemical, pharmaceutical, water treatment, food, metallurgical, and gas purification fields. The filter is a new type of filtration and separation technology material that can be used for various applications, such as terminal filtration of petroleum products, fly ash filtration in the coal chemical industry, impurity removal and filtration of raw materials in the pharmaceutical and chemical industry, water purification, and filtration after ozone sterilization in the water treatment industry, and clarification and filtration of milk, beverages, beer, mineral water, and vegetable oil in the food industry.
All the profucts can process by customization. Please send me the 2D and 3D drawings with size and tolerance. We will evaluate the drawings for you and process according to the drawings. And we will keep the drawings strictly confidential. Customers can also choose processing methods With over 20 years experience, ShenZhen YuJiaXin Hardware Products Co., Ltd. is a leading manufacturer of precision metal parts in China, we provide products to consumer electronics, automotive, medical, and industrial. Metal Injection Molding,or MIM,is a new Powder Metallurgy process that can produce sintered componects with high densety and complicated shapes without the need for machining. With its unique characteristics, MIM is capable of producing precise metal parts for a wide range of products, including automobiles, cellular phones,hand tools,dental instruments,pneumatic tools, power hand tools, surgical instruments,sporting goods, and laptop computers. The common materials used in MIM range from stainless steels and alloy steels to soft magnetic matericals. Metal injection molding (MIM) is an effective way to produce complex and precision-shaped parts from a variety of materials. This process produces parts for 50% less than the cost of CNC machining or casting. MIM is able to produce parts with complex shapes, superior strength and excellent surface finish with high volume manufacturing.High volumes are attained through multi-cavity tooling. From design and tooling to production and quality engineering with in-depth technical and engineering expertise. Our business model is designed to meet the portfolio of parts that global OEMs will source in China. Our facility is growing rapidly, and adding new capabilities in a very short span of time. Please contact us to understand our current state of completion and new capabilities that we plan to add.
The wear castings are usually made by metling the wear resistance materials and formed in a mould. The wear plates are always heatment treated to obtain the best performance for wear and impact resistance to suit the working conditions in different applications. Wear Casting Plates Bimetal Wear Plates
Overview Ideal for basement, attic and garage remodels Easy to install Meets or exceeds EN1495 standards Will not warp or twist Lightweight Fewer nail pops Pest and fire proof Mold and mildew proof Not to be immersed in water Are steel studs galvanized Production of metal studs involves forming the studs from strips of galvanized steel in cold rolling machines. Metal studs used for structural building components utilize heavier gauge metals than the metal studs for non-load bearing walls. Do galvanized steel studs rust Yes, galvanized steel resistance to rust corrosion depends largely on the type and thickness of the protective galvanized zinc coating, but the type of corrosive environment is also a critical factor. Factors that rust and corrode galvanized steel: Relative humidity above 60% Sodium chloride (salt) in water or air. What are the different types of metal studs Conventional metal studs� are available in 25, 22, 20, 18, and 16 gauge steel for your convenience (1-5/8 available in 20, 22 and 25 gauge only). Structural studs are also available. What are the disadvantages of galvanized steel As with any kind of steel finishing, galvanized steel has its cons, which include: There can be a high cost associated with galvanization, especially in large-scale projects. ... Although resistant to red rust, galvanized steel can develop white rust over time if exposed to moisture. Product Name Size(mm) Thickness(mm) Length(m) Metal C- Stud 50 50x30/35/45 0.4-1.2 Standard: 3m 1-6m 60 60x30/35 75 75x35/40/45 90 90x35/45 100 100x35/45 Metal U-Track 50 50x25/30/40 0.4-1.2 Standard: 1-6m 60 60x35/45 75 75x40/45/50 90 90x30/40 100 100x30/40
Double metal hose (with heat tracing metal hose) Product use and characteristics Double deck jacketed stainless steel bellows, mainly used for double deck pipes requiring heating or tracing.
AM50A / AM60B / AZ91
Refer to COA attached for chemical composition of Magnesium Ingot 99.90%
