1.Material: stainless steel 316 or stainless steel 304
2.Surface finish: brushed/satin or polished/mirror
3.Manufacturing methods: precision investment casting
4.We can also make it on the basis of your idea or drawings.
The hydraulic forging hammer is a new energy saving and environmental protection forging hammer. It can save more than 90% energy comparing with the steam forging hammers and the forging hammers with compressor. --roger(at)chinesehammers(dot)com---
The pressure of compressed Nitrogen is constant, and the hammer is operated just by controling the hydraulic system. When you feed blanks, the hydraulic pressure will lift the hammer head. When you hit the blank, the hydraulic pressure will unload fastly and the pressure of compressed Nitrogen and the gravity will drive the hammer head to hit the blank at a very high speed.
The hydraulic forging hammer can promote the efficiency and production with good quality. The hammer has safety locking motion so that working is safe and convenient. As further, It can improve the working condition, which is environmental and good for workers.
The advantage, structure and design feature of hydraulic forging hammers is as follows,
1;Energy conservation and environmental protection.
2;The operation is convenience,lowering and the act is agility
3;System work safety,it has fully safety locking motion
4;Special structure is more fair and more safety.
wooden case.
35059 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
Characteristic of Machine:
1. CE approved
2. Double laser heads, cut bidirectionally from top and bottom at the same time, with high cutting efficiency, also assure the cutting seam to be straight
3. Automatic tracing system for focus point, overcomes the barrier of surface uneven
4. Powerful software, like AutoCAD, CorelDraw, and Adobe Photoshop for unique designing.
5. Adopting imported guide rails, ballscrew transmission system, servo motor and our special designed software, insure steady performance
6. CNC operation, with high cutting speed and accuracy
7. Exhaust system to keep the working condition free of smoke pollution
8. Can cut max. 25mm thickness, especially perfect performance on 20mm plywood
9. With our multi-function bending machine, can realize the full automatic process of template making.
Technical Parameters
Model of Machine :HLD1208
Valid Size (mm) :1200*800
Laser Tube Type :CO2 Sealed Laser Tube
Laser Power :300W
Cutting Speed :0-200mm/s
Power Supply :220V 10A
Cutting Width :0.3-3mm(optional)
Max. Thickness :25mm
Color Separation :Yes
Cutting Precision :¡À0.02mm
Image Form :PLT, EPS, BMP, DXF
Control System :Movement Control Board/CNC
Transmission :ballscrew
Driving System :servo motor
Air Feed Means:air.
Product Features:
1.Laser cutting is high power density ,better controlled no-contact processing.
2.Narrow kerf,small workpiece distortion.
3.High speed:100 times faster than linear cutting
4.Small heat affected zone,good dimension stability.Flat and handsome laser-slotted without later process
5.Steady performance:as a mature laser apparatus, suitable for Mass Serial Production.
Specifications
Model :RL-LCY500-2513
Processing scale :2500*1300mm
Cutting thickness :0.2-6mm
Max output power :800W
Laser wavelength :1064nm
Pulse frequency :1-300HZ
Min.linewidth :0.15mm
Electrical source :380V/50HZ/100A
Cooling system :7p water cooling
Max cutting speed :35mm/s
Weight :3600kg.
Metal frame, is a steel and wood, construction materials earthquake fire. Metal frame of high quality cold-rolled galvanized steel coil as raw material, rolling through a kind of decorative material, which material uniformity, high strength, steel degree of good corrosion resistance. Done in conjunction with gypsum board walls, suspended ceiling with the best materials.
Name: HF50
Main and metal frame production line program
1. Rolling sheet metal thickness: = 1.2 mm.
Second, the production line is mainly composed by:
1. Uncoiled - 2 sets
2. Forming the host - 2 sets
3. Hydraulic cutting system - 2 sets
4.4 sets of care rack
5.2 sets of control systems.
Third, the production line is mainly composed of structural description:
1. Uncoiler: Single-support machine, manual open-book, screw concentric swelling structure.
1) maximum load: 3t.
2) the mandrel base diameter: set by the user.
2. Incision and cut off the hydraulic system: This machine is driven shear cylinder mold to achieve the effect of incision and cut off. All hydraulic components are produced by famous manufacturers.
1) die cut material: gcr12.
2) hardness: hrc58 ~ 60.
3) hydraulic motor power: 3kw.
3. Forming host
1) forming speed: 6 ~ 8 m / min.
2) Forming pass: main keel 16 times. Vice keel 12.
3) frame: adopt the national standard I-beam welded together.
A) name: hot-rolled I-beam.
B) specification: 28 #.
C) standard: gb/t706-1988.
4) spindle:
A) material: high quality 45 # steel.
B) shaft diameter: |46mm.
C) heat treatment: hb235 ~ 280.
D) processing technology: rough heat treatment finishing.
5) Forming roll:
A) material: gr15 (bearing steel).
B) hardness: hrc 60 ~ 62.
C) processing technology: rough heat treatment finishing.
smt,smt mounter, lead-free reflow soldering,lead-free reflow oven,reflow soldering, wave soldering,smt equipment,stencil printer,AOI,BGA repair stations,wave soldering machines, LED glue machine reflow ovens, solder reflow, pcb soldering, lead free soldering, lead free solders, pb free soldering, reflow furnace, smt mounter,smt chip mounter,smt shooter,wave soldering machines, reflow, LED equipment, LED machine, BGA rework stations solder paste,fluxes,Bar Solder, smt semi-automatic printer,solder paste,smt turnkey solutions,smt pick-place machine,
Mindray Electronic equipment Co.,LTD. was founded in July,1999. Now, we have more than 260 employees , more 80 Skillful employees are bachelor degree or above , over 8000M2 manufactory area , all sorts of processing equipment surpass 60 sets, and have a strong ability in research and development and manufacture in SMT.
Parameter Unit : Q3512 Q3518 Q3525B
The diameter of revolving table mm : §¶1200 §¶1800 §¶2500
The maximum weight kg : 500 800 100
Cleaning workpieces size mm : 3-5 800 150
QR3210 : 1.5-2.5 600 30.
The series of Q69 steel sheet shot blasting pre-treament line are mainly consist of warm-up, shot blasting and spray painting and drying process. It applies to shipping, car, motorcycle, bridge, machine etc. which is in the line of steel board, section and structure casting to wipe of surface rusting and painting art.
Parameter Unit Q698 Q6912 Q6915 Q6920
The effective cleaning width mm 800 1200 1500 2000
The room feed-in size mm 1000 x400 1400 x400 1700 x400 2200 x400
The length of cleaning work piece mm 1200-12000 1200-1600 1200-12000 1200-12000
The speed of wheel conveyer(stepless speed variation) m/min 0.5-4 0.5-4 0.5-4 0.5-4
The thickness of cleaning steel sheet mm 3-60 3-60 1.5-60 3-60
The section steel specification mm 800 x300 1000 x300 1500 x300 2000 x300
The quantity of shot blasting kg/min 4 x180 4 x250 4 x250 6 x250
The first enclosed quantity kg 4000 4000 4000 4500
Roll brush adjusting height mm 200 200 350 450
Airiness capacity 22000 17560 19000 19550
Exterior size mm 25017x4500 x9015 12180 x4250 x7095 15200 x5370 x6797 30650 x6850 x9095
Totalpower
except for dust cleaning kw 90 78.3 113.5 156.6./
Principle
Fiber laser adopts a fully integrated design and merges all the components into a single fiunctional element. It has no optical power coupling loss and pollution, air cooling. It possesses merits of high efficiency, long lifetime and low maintenance.
Features
Excellent beam quality
The beam quality of GD-FM Series Fiber laser marking machine is better than that of the conventional solid-state laser marking machine. It is output from the base model (TEMOO) and the focused spot size is 10um. And its divergence angle is 1 / 4 of the semiconductor pump. So it is especially suitable for precision and fine marking.
Low utility cost
The maximum photoelectric efficiency is up to 30%. The input power of this equipment is less than 500W which equals to 1/10 of lamp pump YAG laser marker and saves lots of energy consumption expense
Zero maintenance
Lightstar Fiber Laser Marker is maintenance free and unnecessary to adjust or clean lens.
Long lifetime
Fiber Laser Marker adopts laser diodes as pump source, its average working time can reach 100,000 hours.
High processing speed
The processing speed is 2-3 times faster than traditional laser marker.
Applications
Electrical appliances, electronic communications, auto parts, precision metal, jewelry gifts, glasses watches, instrumentsation, and bathroom ware etc
1.Material: ductile cast iron, gray cast iron
2.Casting process: resin sand costing, green sand casting
3.Machining: turning, lather, drilling, planer. grinding.
4.Surface finished: electroplate, baking varnish, spray-paint
5.Packing: As customer's demand
6.Weight:1----500kg
7. Standard: JIS DIN,BS and ANSI
8. ISO9001:2000 quality control and inspection .we can cast and process the casting parts according to the drawing and samples provided by the customers with excellent quality and competitive price.
Fast curvilinear cutting function: any curves can be cut with a fast and continuous speed, the motion process of laser heads just like a top level speed racers racing aside a beautiful arc. Fully support CAD, CORELDRAlMGERBER and TAJIMA design software, friendly man-machine interface, close to the industries demands.
Fast curvilinear cutting function: any curves can be cut with a fast and continuous speed, the motion process of laser heads just like a top level speed racers racing aside a beautiful arc.
Support many design software like cad, coreldralmgerber, etc, friendly human-computer interface, close to the industries demands.
Support many design software like cad, coreldralmgerber, etc, friendly human-computer interface, close to the industries demands.
Multi-document functions: TY series equipment can store up to several g size of working documents, under the situation of completely off the computer, users can use the engraving machine easily choose files to realize different products batch production.
Full optical coupling isolation system combined with high speed differential input/output circuit design, output and download to u-disk directly, strong anti-jamming capability.
