Main Features
(1) Can recover R22, R134A,R407C, R404A, R410A, etc;
(2) Oil-free compressor design, can directly recover gaseous, liquid or gas-liquid mixture of refrigerant;
(3) Automatic high pressure cut-off switch for Safety; large fan and efficient condenser design, recycling, filling faster;
(4) Can be recovered to negative pressure, recycling more thoroughly;
(5) Multi-function valve design, you can automatically remove the residual refrigerant inside the machine to prevent refrigerant cross-contamination;
(6) Large filter external design, can effectively remove the refrigerant after recovery of moisture and impurities;
(7) Complete high-voltage protection, current protection, for the operation of the system provides a security;
(8) Humanized bar design, easy to carry out;
(9) Shell with a one-time rotation molding technology, high strength, impact resistance, practical and strong;
(10) High-power motor design, can work 24 hours a day.
The Fifth Generation SKM-B Series Peel-Off End Manufacturing Machine
The series machine was successfully developed in 2017, and formally put into use by customersï¼?can be used to manufacture POE,and specially suitable for bigger 202-701# iron POE. It can automatically complete the functions of lids feeding, punching, deep drawing, crimping, aluminum foil pre-sealing, sealing, embossing and output etc. Independent servo controls each function module, adjusts parameters separately, and achieves high speed response and synchronous movement. Inclined punching arrangement makes the aluminum foil waste least.
We can make any new model according to clientsâ?? requirement.
All the information for reference onlyï¼?The products are subject to change without notice.
The various types of equipment we provide are customized according to the needs of customers, and the price will be discussed after the meeting.
The Fifth Generation SKM-B Series Peel-Off End Manufacturing Machine
The series machine was successfully developed in 2017, and formally put into use by customersï¼?can be used to manufacture POE,and specially suitable for bigger 202-701# iron POE. It can automatically complete the functions of lids feeding, punching, deep drawing, crimping, aluminum foil pre-sealing, sealing, embossing and output etc. Independent servo controls each function module, adjusts parameters separately, and achieves high speed response and synchronous movement. Inclined punching arrangement makes the aluminum foil waste least.
We can make any new model according to clientsâ?? requirement.
All the information for reference onlyï¼?The products are subject to change without notice.
The various types of equipment we provide are customized according to the needs of customers, and the price will be discussed after the meeting.
Deluxe is a company specializing in the production of abs cnc prototype with a professional level and first-class service. Strict management of the company,Website:http://www.deluxe-rapid.com, confidential information to customers, strict product quality assurance. Through our continuous development, we've an international R&D engineering workteam to ompany with our clients.
abs machining part.jpg
We often process abs cnc prototype, its applications are:
Transportation: Automobile, motorcycle abs cnc prototype, car dashboard, lampshade and other abs cnc prototype.
Home appliances: air conditioners, LCD TVs, digital cameras, heaters, vacuum cleaners, washing machines, and various types of small appliances ABS hand;
Electronic communications: monitors, telephones, mobile phones, large communications switches abs cnc prototype;
Medical instruments: abs cnc prototype such as X-ray machines, hemodiameters, monitors, and foot health boxes;
1.Name: Custom CNC Stainless Steel Rapid Prototype Metal Machining Service
2.Process: CNC Machining
3.Material: Stainless Steel
4.Surface: as machined
5.Tolerance: +/-0.01mm
6.Quality control of metal rapid prototype: 100% inspected
7.Specification of metal rapid prototype: OEM, strictly according drawing and samples
8.Sample delivery time of metal rapid prototype: 7-10 days, per products.
9.Application of our metal rapid prototypes: CNC Machining, Mining Accessories, Machinery Accessories, Truck Parts, Auto Parts, Industrial Parts, etc
10.Customer: USA,Canada, Australia, EU, South America, Asia etc.
11.Certification: ISO 9001
Deluxe -- a professional manufacturer specializing in development, design, manufacture of metal rapid prototype, injection mould, Die-Casting Die, Vacuum forming, molding products, as well as finished products assembly which application for Household appliances, kitchenware, transportation tool, digital & telecommunication products, toys,
34676 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
Deluxe is a factory-based international trading company, we focus on the casting, CNC machining and sheet metal fabrication fields. We have advanced machines including 5 axis CNC gantry-type machines, 4 axis horizontal machining centers( MORI SEIKI,Japan), 3 axis vertical machining centers, CNC boring machines,laser cutting machines, 12 meters CNC gantry type machine,etc.
We have a strong and highly efficient R&D team which can design and make OEM/ODM products according to your drawings and samples. All of our operations are strictly compliant with ISO 9001: 2008 guidelines, for high quality products with good service, Deluxe is the best choice.
1. Q: what is the processing for the quote ?
A: We can quote from your 3d formats like IGS,STP,PARASOLID etc and 2D drawings as well; quote the price to clients after got the 2d or 3d drawings within 2 hours;
2. Q: How is the next ?
A: We will send the cost to you and get your confirmations for the quote;
3. Q: what is the software will you use for the proceeding ?
A: We make the 3D programme with Pro-Engineer,UGS,SOLIDWORKS,MASTERCAM etc ;
4. Q: what is the type of machines for manufacturing please ?
A: Manufactured from CNC Machining,Laser cutting , stamping ,injection as well as the parts files different ;
Deluxe is a comprehensive quickturn prototype machine shop specializing in the production of prototyping and product design. The existing industrial-grade 3D printer (SLA), vacuum compounding machine, large-scale precision CNC machining center, milling machine, lathe, sandblasting machine and other equipment 60 More than one station, equipped with a group of highly skilled and experienced design engineers, programming engineers, hand board technicians, painting technicians and quality engineers, to provide customers with high-quality, efficient and value-added services.
Deluxe quickturn prototype machine shop adheres to the spirit of continuous innovation and serves customers. It promotes the development of customers' products and greatly reduces the cost, cycle and risk of product development. Deluxe quickturn prototype machine shop has won the support and trust of customers and people from all walks of life.
Deluxe quickturn prototype machine shop will continue to expand its technical strength and innovation process to cater to the needs of c ustomers' product development and market innovation, and strive to build the most satisfactory product development and production platform for customers! url:http://www.deluxe-rapid.com
Household Appliance Prototyping
Itâ??s a huge risk to production without review a prototype before molding for household appliance. Household appliance prototype is not only visiable but also touchable. Molto household appliance prototyping service specialize in prototype making to verify structural rationality and fitting in your design, which helps thousands projects find the best solution. Even if you're far away in Europe or America, we are able to offer the best solution too.
Usually, products that have just been developed or designed need to make industrial rapid prototypes. Industrial rapid prototypes is the first step to verify the feasibility of the product. It is the most direct and effective way to identify the defects of the designed products, so as to improve the product. At this point, it is usually necessary to conduct a small amount of trial production and then find out that there is insufficient improvement in the batch. The products that are designed and completed cannot generally be perfect or even unusable. If there are defects in the direct production,
all of them will be scrapped, which will waste human and material resources and time. The general situation of the industrial rapid prototype is a small number of samples, the production cycle is short, and the manpower and material loss is small. Quickly find out the insufficiency of product design and improve it, and provide sufficient basis for the product's setting and mass production.
Deluxe Company specializes in industrial rapid prototypes processing and is committed to providing perfect products to help customers quickly complete design and testing, and open the market as soon as possible.
The industrial prototype fabrication are divided according to the means of production and can be divided into manual industrial prototype and numerical control industrial prototype,Website:http://www.deluxe-rapid.com, Deluxe has acquired the capabilities to take any job of industrial prototype fabrication:
(1) Manual Industrial prototype: Its main workload is done by hand.
(2) CNC Industrial prototype: Its main workload is achieved by CNC machine tools. According to the different equipment used, it can be divided into Rapid Prototyping (RP) and CNC machining.
A: SLA Industrial prototype: It's mainly made of laser rapid prototyping technology.
B: CNC Industrial prototype: It is mainly a hand board produced by a machining center.
The RP Industrial prototype compares with the CNC Industrial prototype:
The advantages of the RP industrial prototype fabrication are mainly manifested in its rapidity, but it is mainly formed by a stacking technique. Therefore, the RP industrial prototype fabrication is generally relatively rough and has a certain requirement on the wall thickness of the product. For example, if the wall thickness is too thin, it cannot be produced.
The advantage of the CNC Industrial prototype is that it can accurately reflect the information expressed on the drawings, and the surface quality of the CNC Industrial prototype is high, especially after it finishes spraying and silk screen printing, even more brilliant than the products produced after opening the mold. Therefore, the manufacture of CNC Industrial prototype has become the mainstream of Industrial prototype manufacturing.
Our Aerospace Part Machining Manufacturing Capabilities
Multi aerospace part machining service
We have invested advanced CNC machines which are of Multi-axis. It allows us able to do wholistic processing by multi aerospace part machining, this is really important to keep extreme precision in aerospace parts
CNC turning service for aerospace part machining
CNC turning is a machining way that makes possible to manufacture multiple components to interact with one another perfectly. Our machine achieves accuracy below 10 microns and make aerospace parts are highly qualified and reliable.
In-house inspection lab with CMM
It a basic to have CMM to inspection aerospace parts, some aerospace machining parts are with complex structures which can not allow normal tools for inspection. CMM is a necessary way to assure you of your precise aerospace
Condition:New
Laser Type:Fiber Laser
Cooling Mode:Air Cooling
Control Software:EZCAD Software
Graphic Format Supported:AI, DXF, laser marking machine
Working Accuracy:0.01mm
Place of Origin:Shandong, China (Mainland)
Brand Name:Hanten laser
Model Number:HTF-20/30/50/100T
Power(W):20W/30W/50W/100W
Certification:CCC, CE, SGS
After-sales Service Provided:Engineers available to service machinery overseas
Laser source:Raycus IPG JPT,CAS ,Max
Marking Depth:0.01-5mm (according to different material )
laser wavelength:1064nm
Marking speed:
HENAN KOWLOON MACHINERY CO., LTD. The company has 20 years history of be engaged in steel bar cutting, steel bar bending and other construction machinery industry,the quality and quantity are in the lead numbers of China.and the productions has been exported to Southeast Asia, Russia, the Middle East, Africa and South America countries and area. We hope to have a pleasant cooperation with you.
This kind of high power metal laser engraving machine specially fit for processing high reflective material such as brass ,red copper and galvanize sheet etc .
Features:
a.The high power fiber metal laser engraving machine with better laser beam quality , lower operating costs , less power consumption and loger working life by using the new generation IPG fiber laser source.
b. The Metal laser engraving machine equipped with PRECITEC new generation pro-cutter laser cutting head , optimized cutting process , monitoring cutting condition through APP use easily and friendly
c. Eagle eye(CCD) technology , ultra0fast positioning the sheet metal edge , minimum cutting down time , In addition , it also can process punching parts and precut parts ,due to secondary positioning function
d. Optimized cutting technology with programmable laser frequency and focus position , to achieve high efficiency processing on different thickness& type sheet metal . ll cutting parameters can be programmed , no need human intervention
e. Automatic energy saving mode: while stop over 5 minutes , machine automatically switch into standby mode , to reduce power consumption .
f. Auto exchanging table with Hydraulic lifting system; ensure synchronous running for metal laser engraving machine , reliable and stable
g. The metal laser engraving machine with remote function , can remotely monitor the running conditions of machine , much easier for service and faster response
h. With ergonomic design , equipped with intelligent operation terminal , user-friendly and easy to learn
Applicable materials
Metal materials such as aluminum alloy , Galvanize sheet , Carbon steel , stainless steel , Brass , Red copper etc.
Technical Parameter
Maximum material size 4000X2000 mm
Laser power 4000W/6000W/8000W/10000W
Maximum speed 170m/min
Positioning Accuracy ±0.05mm(VDI/DGQ3441)
Repeated accuracy ±0.03mm(VDI/DGQ3441)
Model MACH2040/6025
Work environment Temperature 0-45 Humility 80%clean, less dust
Maximum accelerated speed 2.2(G)
Total Power 18kw/25kw
Machine weight 13.5T/15.5T
Dimension Mach4020: 12000*3500*2200mm
Mach6020: 15500*4200*2200mm
Paint Bucket Crusher / Industrial Aluminum Can Crusher
Civilian scrap metal has high recycling ratio in recycling system, most of that is small and light scrap by different quality with feature of rusted easily, low molten steel like waste household appliances shells, metal furniture , metal door and window, bicycle, color steel tiles, car shells Etc. It should get great tredted like de-dusting , rusty-removing, increasebulk density if you want get preferable recycling.
A heated workpiece is placed in a stationary mold half. The upper mold half is pushed against the workpiece with an applied pressure force and deformed and shaped by the two mold halves. It often requires several strokes before the mold cavity is fully filled.
To ensure that such a material is sufficient to fill the mold the workpiece volume is slightly larger than the mold. The design allows for excess material to flow outside the required shape and is trimmed away in a subsequent operation. In some cases, the part is repositioned in the mold to apply further strokes to achieve final size and volume.
The closed die forging method allows for Precision forging where ingot size is carefully controlled. More information about closed die forging, refer to closed die forging vs open die casting.
Investment casting is one of the oldest manufacturing processes.Investment casting process was used mainly to reproduce metal parts and to reduce the time and labor needed for producing parts in quantity by metal smiths. Since then modern technology has made the metal smith basically extinct.
The mould is made by making a pattern using wax or some other material that can be melted away. This wax pattern is dipped in refractory slurry and covered with stucco, which coats the wax pattern and forms a skin.
This is dried and the process of dipping in the slurry, stuccoing and drying is repeated until a robust thickness is achieved.After this, the entire mould is placed in an oven and the wax is melted away. This leads to a mould cavity that can be filled with the molten metal. Check investment casting vs sand casting to learn more about investment casting...
Due to the advantages of investment casting, it can be used to make parts that cannot be produced by normal manufacturing techniques, such as turbine compressor blades that have complex shapes, or airplane parts that have to withstand high temperatures.
34676 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
